Partios Wholesale catalogue

Megadyne Supplier | Engine Components

Drive belt (110) · Pulley (29)

142 current catalogue lines

About the MEGADYNE range

Megadyne’s range at Partios is engine components, and it is concentrated: 110 of the 142 lines carried sit under one part type, drive belt. Behind it the largest groups are pulley (29). That is the complete range. Two part types in total. Buyers are typically workshops, motor factors and exporters; these are mostly scheduled-replacement or failure-driven items, where correct application matching is what decides the order. 142 lines makes this a specific range rather than a broad programme. Approved trade accounts see wholesale pricing across the whole Megadyne range. Anything not in stock can be requested as a manufacturer order.

Catalogue products

MEGADYNE Drive belt RPP 950X25

Timing toothed belt wedge width: 25mm, standard length: 950mm

View part

MEGADYNE Drive belt RPP14 1610X50

Timing toothed belt wedge width: 50mm, inner length: 1610mm, belt profile 14M

View part

MEGADYNE Drive belt RPP14 2590X55

Timing toothed belt wedge width: 55mm, inner length: 2590mm, belt profile 14M

View part

MEGADYNE Drive belt RPP14 6500X55

V-belt, open wedge width: 55mm, standard length: 6510mm

View part

MEGADYNE Drive belt RPP5 455X9

V-belt, polyurethane, open number of teeth: 91, wedge width: 9mm, standard length: 455mm, belt profile 5M, metric scale: 5mm

View part

MEGADYNE Drive belt RPP5 500X25 CORREX

Timing toothed belt wedge width: 25mm, standard length: 500mm

View part

MEGADYNE Drive belt RPP5-DD 1100X25

V-belt, ribbed on two sides wedge width: 25mm, standard length: 1100mm, belt profile 5M

View part

MEGADYNE Drive belt RPP5-DD 1800X25

V-belt, ribbed on two sides wedge width: 25mm, standard length: 1800mm

View part

MEGADYNE Drive belt RPP8 560X30

Timing toothed belt wedge width: 30mm, standard length: 560mm

View part

MEGADYNE Drive belt RPP8-DD 1600X30

V-belt, ribbed on two sides wedge width: 30mm, standard length: 1600mm

View part

MEGADYNE Drive belt RPP8-DD 1680X25

V-belt, ribbed on two sides wedge width: 25mm, standard length: 1680mm

View part

MEGADYNE Drive belt SPZ 850

V-belt, narrow-profiled wedge width: 9,7mm, wedge height: 8mm, standard length: 850mm, belt profile SPZ

View part

MEGADYNE Drive belt T10/1000/25

Pas zębaty

View part

MEGADYNE Drive belt T10/1080/25

V-belt, polyurethane number of teeth: 108, wedge width: 25mm, standard length: 1080mm

View part

MEGADYNE Drive belt T10/1150/16

Pas zębaty

View part

MEGADYNE Drive belt T10/1600/25

Pas zębaty T10/1600/25

View part

MEGADYNE Drive belt T10/1850/25

Combined toothed belt, steel cord

View part

MEGADYNE Drive belt T10/1900/25

Timing toothed belt number of teeth: 190, standard length: 1900mm, belt profile T10

View part

MEGADYNE Drive belt T10/1970/65 KEVLAR

Pas zębaty - MEGALINEAR z kordem kevlarowym

View part

MEGADYNE Drive belt T10/2010/25

Timing toothed belt number of teeth: 201, standard length: 2010mm, belt profile T10

View part

MEGADYNE Drive belt T10/2620/25 KEVLAR

V-belt, endless, polyurethane number of teeth: 262, wedge width: 25mm, standard length: 2620mm, belt profile T10 (kevlar)

View part

MEGADYNE Drive belt T10/400/25

V-belt, endless, polyurethane number of teeth: 40, wedge width: 25mm, standard length: 400mm, belt profile T10

View part

MEGADYNE Drive belt T10/4350/25 ZAB 7X4/P=50

Pas zębaty łączony z kordem stalowym z zabierakami 87 szt. o wym. 7x4 mm, podziałka 50mm na całej szerokości

View part

MEGADYNE Drive belt T10/480X25

Toothed belt

View part

MEGADYNE Drive belt T10/500/32 FDA

Timing toothed belt number of teeth: 50, wedge width: 32mm, standard length: 500mm, belt profile T10

View part

MEGADYNE Drive belt T10/550/16

toothed belt

View part

MEGADYNE Drive belt T10/560/16

Pas zębaty

View part

MEGADYNE Drive belt T10/610/25

Pas zębaty

View part

MEGADYNE Drive belt T10/660/16

Timing toothed belt number of teeth: 66, wedge width: 16mm, standard length: 660mm, belt profile T10

View part

MEGADYNE Drive belt T10/700/30+LINATEX 6MM

Timing toothed belt number of teeth: 70, wedge width: 30mm, standard length: 700mm, belt profile T10

View part

MEGADYNE Drive belt T10/840/32 MEGADYNE

Timing toothed belt number of teeth: 84, wedge width: 32mm, standard length: 840mm, belt profile T10

View part

MEGADYNE Drive belt T5/1026/25+NFB /MEGADYNE/

Timing toothed belt number of teeth: 1030, wedge width: 25mm, standard length: 10265mm, belt profile T5

View part

MEGADYNE Drive belt T5/420/10 MEGADYNE

V-belt, polyurethane number of teeth: 84, wedge width: 10mm, standard length: 420mm, belt profile T5

View part

MEGADYNE Drive belt T5/5150/25+NFB /MEGADYNE/

Timing toothed belt number of teeth: 1030, wedge width: 25mm, standard length: 5150mm, belt profile T5

View part

MEGADYNE Drive belt T5/550/10

V-belt, polyurethane number of teeth: 110, wedge width: 10mm, standard length: 550mm, belt profile T5

View part

MEGADYNE Drive belt T5/5690/25+NFB /MEGADYNE/

Timing toothed belt number of teeth: 1030, wedge width: 25mm, standard length: 5690mm, belt profile T5

View part

MEGADYNE Drive belt T5/630/25+NFB /MEGADYNE/

Timing toothed belt number of teeth: 126, wedge width: 25mm, standard length: 630mm, belt profile T5

View part

MEGADYNE Drive belt T5/765/25+NFB /MEGADYNE/

Timing toothed belt wedge width: 25mm, standard length: 765mm, belt profile T5

View part

MEGADYNE Drive belt XPA 1507

V-belt, narrow-profiled, ribbed wedge width: 12,7mm, wedge height: 10mm, standard length: 1507mm, belt profile XPA

View part

MEGADYNE Drive belt XPA 1957

toothed V-belt

View part

MEGADYNE Drive belt ZR 260 XL 050

PAS ISORAN MEGADYNE

View part

MEGADYNE Drive belt ZRM AT 5/2050X10-NFT

Toothed belt with fabric open on the side of the teeth

View part

MEGADYNE Drive belt ZRM T 5/1380X10

MegaPower toothed belt

View part

MEGADYNE Drive belt ZRM T10/1010X26

Toothed belt

View part

MEGADYNE Drive belt ZRM T10/1480X25

Toothed belt

View part

MEGADYNE Drive belt ZRM T10/1680X25

Toothed belt

View part

Buying with Partios

Buying MEGADYNE parts through Partios

Are these genuine MEGADYNE parts?

Yes. Every MEGADYNE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MEGADYNE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MEGADYNE lines that aren't currently available.

Do you supply MEGADYNE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MEGADYNE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MEGADYNE order?

It depends on the line. Stocked MEGADYNE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MEGADYNE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MEGADYNE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account