Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Suspension ball joint HR8979

Reinforced suspension pin, quantity per set: 2 pcs, front, L/R} fits: AUDI A3, A3 ALLSTREET, Q2 SEAT ALTEA, ALTEA XL, LEON, TOLEDO III SKODA OCTAVIA II, OCTAVIA III, SUPERB II 1.0-Electric 02.03-

View part

HARDRACE Stabilizer HR8980

Stabilizer, rear, 19 mm fits: HONDA ACCORD VIII 2.0/2.2D/2.4 06.08-06.15

View part

HARDRACE Track control arm HR8981

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: INFINITI Q45 III 4.5 02.01-06.06

View part

HARDRACE Track control arm HR8982

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: INFINITI Q45 III 4.5 02.01-06.06

View part

HARDRACE Stabilizer HR8983

Stabilizer, rear, 25,4 mm fits: LEXUS RX 2.0/2.7/3.5 12.08-12.17

View part

HARDRACE Track control arm HR8984

Reinforced swingarm, quantity per set: 2, rear, bottom L/R } (adjustable camber angle) fits: MITSUBISHI LANCER VIII 2.0 03.07-

View part

HARDRACE Track control arm HR8987

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: CADILLAC ATS 3.6 04.15-

View part

HARDRACE Track control arm HR8988

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: CADILLAC ATS 3.6 04.15-

View part

HARDRACE Track control arm HR8989

Reinforced swingarm, quantity per set: 2, rear, top L/R, UNIBALL } (adjustable camber angle) fits: CADILLAC ATS 3.6 04.15-

View part

HARDRACE Track control arm HR8990

Reinforced swingarm, quantity per set: 2, rear, bottom/front L/R, UNIBALL } (adjustable camber angle) fits: CADILLAC ATS 3.6 04.15-

View part

HARDRACE Track control arm HR8992

Reinforced swingarm, quantity per set: 2, rear, top L/R } (adjustable camber angle) fits: LEXUS GS, IS III 2.5/3.5 03.12-

View part

HARDRACE Stabilizer link HR8994

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 (adjustable, length: 135-158mm) fits: CADILLAC ATS, CTS CHEVROLET CAMARO 2.0/3.6/6.2 02.13-

View part

HARDRACE Track control arm HR8995

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: HYUNDAI I30, SONATA VII 1.0-2.4 09.14-

View part

HARDRACE Track control arm HR8996

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CR-V IV 1.6D/2.0 10.12-12.18

View part

HARDRACE Tie rod (with no end) HR8997

Reinforced steering rods, quantity per set: 2 pcs, L/R fits: HONDA fits: HONDA ACCORD VII 2.0-3.0 09.02-05.08

View part

HARDRACE Suspension struts HR8998

Upper suspension bar fits: TOYOTA AURIS, COROLLA 1.3-2.2D 10.06-

View part

HARDRACE Stabilizer HR8999

Stabilizer, rear, 22 mm (2WD vehicles) fits: MAZDA CX-5, CX-9 2.0-3.7 09.06-

View part

HARDRACE Suspension ball joint HRQ0001

Reinforced suspension pin}

View part

HARDRACE Engine bracket HRQ0002

Reinforced engine pad,

View part

HARDRACE Track control arm HRQ0003

Reinforced swingarm, quantity per set: 2, rear, top L/R } (rubber-metal reinforced bush) fits: FORD MONDEO V 1.0-2.0H 08.14-03.22

View part

HARDRACE Suspension struts HRQ0004

Body torsion bar (radiator support) fits: TOYOTA

View part

HARDRACE Suspension struts HRQ0005

Body torsion bar

View part

HARDRACE Suspension struts HRQ0006

Body torsion bar

View part

HARDRACE Suspension struts HRQ0007

Body torsion bar

View part

HARDRACE Other elements of suspension system HRQ0008

View part

HARDRACE Suspension struts HRQ0010

Body torsion bar fits: TOYOTA COROLLA, COROLLA VERSO 1.4-2.0D 01.01-03.08

View part

HARDRACE Suspension struts HRQ0011

Body torsion bar

View part

HARDRACE Track control arm HRQ0012

Reinforced swingarm, quantity per set: 2, front, bottom L/R } fits: LEXUS RX 2.0/2.7/3.5 12.08-12.17

View part

HARDRACE Engine bracket HRQ0013

Reinforced engine pad, fits: VOLVO XC60 I FORD MONDEO IV 1.6-3.2 03.07-12.17

View part

HARDRACE Uniball HRQ0014

Uniball swingarm bushings} fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Suspension struts HRQ0018

Upper suspension bar fits: MAZDA CX-3 1.5D/1.8D/2.0 02.15-

View part

HARDRACE Suspension struts HRQ0019

Body torsion bar

View part

HARDRACE Suspension struts HRQ0020

Body torsion bar fits: MAZDA CX-3 1.5D/1.8D/2.0 02.15-

View part

HARDRACE Suspension struts HRQ0021

Body torsion bar

View part

HARDRACE Suspension struts HRQ0022

Suspension struts fits: MAZDA CX-3 1.5D 02.15-01.18

View part

HARDRACE Stabilizer link HRQ0024

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: PORSCHE 911, 911 SPEEDSTER, 911 TARGA, BOXSTER, BOXSTER SPYDER, CAYMAN 2.5-4.0 09.96-06.13

View part

HARDRACE Suspension ball joint HRQ0026

Reinforced suspension pin} fits: FORD KUGA II 1.5-2.0D 10.12-12.19

View part

HARDRACE Other elements of brake system HRQ0028

View part

HARDRACE Suspension struts HRQ0029

Body torsion bar

View part

HARDRACE Suspension struts HRQ0030

Body torsion bar

View part

HARDRACE Suspension struts HRQ0031

Lower suspension bar fits: HONDA CR-V V 1.5 12.16-

View part

HARDRACE Suspension struts HRQ0032

Body torsion bar (2WD vehicles) fits: TOYOTA

View part

HARDRACE Track control arm HRQ0033

Reinforced swingarm, quantity per set: 2 } fits: TOYOTA 4 RUNNER III 3.0D/3.4 11.95-11.02

View part

HARDRACE Suspension struts HRQ0034

Upper suspension bar fits: SUZUKI SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

HARDRACE Stabilizer HRQ0035

Stabilizer fits: SUZUKI SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

HARDRACE Suspension struts HRQ0037

Suspension struts fits: DODGE RAM 1500, RAM 2500, RAM 3500 3.9-8.0 04.91-08.02

View part

HARDRACE Panhard rod HRQ0038

View part

HARDRACE Panhard rod HRQ0039

Panhard rod, quantity per set: 1 pcs, front} (adjustable rubber-metal reinforced bush) fits: DODGE RAM 2500 5.9D/8.0 01.02-12.09

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account