Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Suspension struts HRQ0041

Suspension struts fits: MAZDA CX-9 2.5 06.16-

View part

HARDRACE Tie rod (with no end) HRQ0042

Reinforced steering rods, quantity per set: 2 pcs, L/R fits: MITSUBISHI fits: MITSUBISHI LANCER VII, OUTLANDER I, SPACE RUNNER 2.0 08.99-09.07

View part

HARDRACE Stabilizer HRQ0043

Stabilizer, front thickness: 25,4mm, fits: VW TRANSPORTER T5, TRANSPORTER T6 / CARAVELLE T6 1.9D-3.2 04.03-12.19

View part

HARDRACE Track control arm HRQ0045

Reinforced swingarm, quantity per set: 2, rear, longitudinal L/R }

View part

HARDRACE Track control arm HRQ0046

Reinforced swingarms set, quantity per set: 2, rear axle, top L/R, UNIBALL } (adjusted) fits: LEXUS NX TOYOTA RAV 4 III, RAV 4 IV 2.0-3.5 11.05-

View part

HARDRACE Suspension struts HRQ0047

Suspension struts fits: DODGE RAM 1500, RAM 2500, RAM 3500 3.9-8.0 04.91-08.02

View part

HARDRACE Suspension struts HRQ0048

Upper suspension bar fits: MITSUBISHI OUTLANDER II 2.0-3.0 11.06-11.12

View part

HARDRACE Polyurethane suspension sleeve HRQ0049

Polyurethane bushing, fits: HONDA JAZZ IV, JAZZ V 1.3/1.5/1.5H 09.15-

View part

HARDRACE Stabilizer HRQ0051

Stabilizer, rear thickness: 19mm, fits: FORD FIESTA VI 1.0-1.6D 06.08-01.18

View part

HARDRACE Suspension struts HRQ0053

Body torsion bar fits: SKODA SUPERB III 1.4-2.0D 03.15-06.24

View part

HARDRACE Suspension struts HRQ0054

Body torsion bar fits: SKODA SUPERB III 1.4-2.0D 03.15-06.24

View part

HARDRACE Suspension struts HRQ0055

Body torsion bar fits: SKODA SUPERB III 1.4-2.0D 03.15-06.24

View part

HARDRACE Uniball HRQ0056

Uniball swingarm bushings} fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), 5 (E61), 6 (E63), 6 (E64), X1 (E84), Z4 (E89) 1.6-5.0 12.01-08.16

View part

HARDRACE Track control arm HRQ0057

Reinforced swingarm, quantity per set: 2, front, bottom L/R, UNIBALL } fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 1.6-4.4 06.04-08.16

View part

HARDRACE Suspension struts HRQ0058

Lower suspension bar (Brace) fits: SUZUKI SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

HARDRACE Suspension struts HRQ0059

Lower suspension bar (radiator support) fits: SUZUKI SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

HARDRACE Other lighting elements HRQ0060

View part

HARDRACE Suspension struts HRQ0061

Suspension struts fits: MAZDA 3 1.3-2.0D 10.03-12.09

View part

HARDRACE Steering knuckle HRQ0062

Steering knuckle set, quantity per set: 2 pcs, front, L/R} , fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA 1.3-2.0D 10.91-10.01

View part

HARDRACE Track control arm HRQ0063

Reinforced swingarms set, quantity per set: 2, rear axle, bottom L/R } (strengthened sleeves) fits: HONDA S2000 2.0/2.2 06.99-

View part

HARDRACE Other elements of brake system HRQ0064

View part

HARDRACE Suspension struts HRQ0068

Upper suspension bar fits: SUBARU LEVORG 1.6/2.0 09.15-

View part

HARDRACE Engine bracket HRQ0069

Set of reinforced pads 2 pcs, left/right, fits: HONDA CIVIC V, CIVIC VI, INTEGRA 1.4-2.0D 10.91-10.01

View part

HARDRACE Positioning rings HRQ0070

Gearshift lever repair kit fits: HONDA CIVIC V, CIVIC VI, CR-V I, INTEGRA 1.3-2.0 10.91-02.02

View part

HARDRACE Stabilizer link HRQ0071

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 (4WD vehicles) fits: MITSUBISHI 3000 GT 3.0 01.90-08.99

View part

HARDRACE Uniball HRQ0076

Uniball swingarm bushings, quantity per set: 2 pcs, front axle, L/R, from the front/lower swingarm} fits: AUDI A3, Q2, Q3, TT CUPRA ATECA, FORMENTOR, LEON, LEON SPORTSTOURER 1.0-Electric 02.03-

View part

HARDRACE Front track control arm silent block HRQ0077

Front track control arm silent block L/R (13x66x50 mm) fits: AUDI A1, A3, Q2, Q3, TT SEAT ARONA, ATECA, IBIZA V, LEON, LEON SC, LEON ST SKODA KAROQ, KODIAQ I, OCTAVIA III 1.0-Electric 04.12-

View part

HARDRACE Suspension struts HRQ0078

Body torsion bar fits: SUBARU LEVORG, WRX 1.6/2.5 06.14-

View part

HARDRACE Suspension ball joint HRQ0085

Reinforced suspension pin, quantity per set: 2 pcs, bottom/in the front, L/R} fits: LEXUS NX TOYOTA RAV 4 III, RAV 4 IV 2.0-3.5 11.05-

View part

HARDRACE Stabilizer HRQ0087

Stabilizer fits: HYUNDAI I30 1.0-1.6DH 11.16-

View part

HARDRACE Stabilizer HRQ0088

Stabilizer fits: HYUNDAI I30 1.0-1.6DH 11.16-

View part

HARDRACE Polyurethane suspension sleeve HRQ0092

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HRQ0093

Reinforced bushing, 2pcs, fits: TOYOTA ALTEZZA GITA, CHASER 2.5/3.0 10.92-11.05

View part

HARDRACE Suspension ball joint HRQ0094

Reinforced suspension pin, quantity per set: 2 pcs, bottom/front, L/R} fits: HONDA CIVIC X, CIVIC XI 1.0-2.0 08.16-

View part

HARDRACE Suspension struts HRQ0095

Upper suspension bar fits: HONDA CIVIC V, CIVIC VI 1.4-2.0D 01.92-03.01

View part

HARDRACE Engine bracket HRQ0096

Reinforced engine pad, fits: TOYOTA AVENSIS, CELICA 1.6-2.4 08.99-11.08

View part

HARDRACE Suspension struts HRQ0104

Suspension struts fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Panhard rod HRQ0105

View part

HARDRACE Polyurethane suspension sleeve HRQ0109

Polyurethane bushing, fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01

View part

HARDRACE Suspension struts HRQ0110

Body torsion bar fits: SUBARU FORESTER 2.0/2.0D/2.0LPG 03.13-

View part

HARDRACE Stabilizer HRQ0111

Stabilizer fits: DODGE CHALLENGER 3.5/6.2/6.4 09.08-

View part

HARDRACE Front wishbone assembly HRQ0112

Suspension track control arm set fits: DODGE CHALLENGER 6.4 09.14-

View part

HARDRACE Front wishbone assembly HRQ0113

Suspension track control arm set fits: DODGE CHALLENGER 6.2/6.4 09.14-

View part

HARDRACE Stabilizer HRQ0115

View part

HARDRACE Engine bracket HRQ0116

Reinforced engine pad, fits: MAZDA 3 2.3 10.03-06.09

View part

HARDRACE Track control arm HRQ0117

Reinforced swingarm, quantity per set: 2 } fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Track control arm HRQ0118

Reinforced swingarm, quantity per set: 2 } fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Suspension struts HRQ0120

Suspension struts fits: TOYOTA COROLLA 1.2/1.8H/2.0H 10.18-

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account