Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Engine bracket HR8930

Reinforced engine pad, fits: FORD FIESTA VI 1.6 03.13-04.17

View part

HARDRACE Track control arm HR8931

Reinforced swingarm, quantity per set: 2, front, bottom/front L/R } (rubber-metal reinforced bush) fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 3 (F30, F80), 3 (F31) 1.5-3.0H 07.11-

View part

HARDRACE Track control arm HR8932

Reinforced swingarm, quantity per set: 2, front, bottom/rear L/R } (rubber-metal reinforced bush) fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34) 1.5-3.0H 07.11-

View part

HARDRACE Stabilizer link HR8933

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: VOLVO C30, C70 II, S40 II, V40, V50, XC60 I FORD C-MAX, C-MAX II, FOCUS C-MAX, FOCUS II 1.0-Electric 06.01-

View part

HARDRACE Panhard rod HR8934

Panhard rod, quantity per set: 1 pcs, front} (adjustable rubber-metal reinforced bush) fits: JEEP CHEROKEE, GRAND CHEROKEE I, WRANGLER II 2.1D-5.9 10.84-04.07

View part

HARDRACE Suspension struts HR8935

Lower suspension bar fits: SUBARU IMPREZA, LEVORG 1.6/2.5 01.11-

View part

HARDRACE Suspension struts HR8936

Upper suspension bar fits: SUBARU FORESTER 2.0/2.0D/2.0LPG 03.13-

View part

HARDRACE Suspension struts HR8937

Lower suspension bar (2 pcs. set) fits: SUBARU FORESTER 2.0/2.0D/2.0LPG 03.13-

View part

HARDRACE Engine bracket HR8938

Reinforced engine pad,

View part

HARDRACE Stabilizer HR8939

Stabilizer, rear, 17 mm fits: MAZDA CX-3 1.5D/2.0 02.15-

View part

HARDRACE Undercarriage shield HR8941

Engine and gearbox cover fits: HONDA HR-V 1.5 (RU1)/1.6 i-DTEC (RU8) 08.15-

View part

HARDRACE Polyurethane suspension sleeve HR8942

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, IMPREZA, XV 1.6-2.0LPG 03.13-

View part

HARDRACE Polyurethane suspension sleeve HR8943

Reinforced suspension bushings (2pcs, front swingarm, L/R, bottom/front, inner diameter 12mm, outer diameter 28/48mm) fits: AUDI A3, Q2, Q3, TT CUPRA ATECA, FORMENTOR, LEON 02.03-

View part

HARDRACE Engine bracket HR8944

Reinforced engine pad,

View part

HARDRACE Track control arm HR8945

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14

View part

HARDRACE Stabilizer link HR8946

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 (adjustable) fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, GALAXY MK II 1.5-4.4 03.06-12.19

View part

HARDRACE Suspension struts HR8947

Upper suspension bar fits: TOYOTA

View part

HARDRACE Suspension struts HR8948

Upper suspension bar fits: MERCEDES A (W176), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) INFINITI Q30 1.5D-2.2D 06.12-

View part

HARDRACE Suspension struts HR8949

Upper suspension bar fits: SKODA SUPERB III 1.4-2.0D 03.15-06.24

View part

HARDRACE Track control arm HR8950

Reinforced swingarm, quantity per set: 2, front, bottom/rear L/R } (rubber-metal reinforced bush) fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HARDRACE Track control arm HR8951

Reinforced swingarm, quantity per set: 2, front, bottom/front L/R } (rubber-metal reinforced bush) fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HARDRACE Track control arm HR8952

Reinforced swingarm, quantity per set: 2, front, bottom/front L/R } (rubber-metal reinforced bush) fits: MERCEDES E T-MODEL (S211), E (W211) 1.8-6.3 03.02-07.09

View part

HARDRACE Track control arm HR8953

Reinforced swingarm, quantity per set: 2, front, bottom/rear L/R } (rubber-metal reinforced bush) fits: MERCEDES E (W211) 1.8-6.2 03.02-12.08

View part

HARDRACE Track control arm HR8955

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: HYUNDAI ELANTRA VI, I30 1.0-1.6DH 02.16-

View part

HARDRACE Suspension struts HR8956

Lower suspension bar fits: TOYOTA C-HR 1.2 10.16-

View part

HARDRACE Suspension struts HR8957

Lower suspension bar fits: TOYOTA CAMRY, C-HR, COROLLA 1.2-2.5 09.11-

View part

HARDRACE Suspension struts HR8958

Lower suspension bar fits: TOYOTA C-HR 1.2 10.16-

View part

HARDRACE Other elements of suspension system HR8959-19

View part

HARDRACE Other elements of suspension system HR8959-22

View part

HARDRACE Other elements of suspension system HR8959-25.4

View part

HARDRACE Other elements of suspension system HR8959-28

View part

HARDRACE Other elements of suspension system HR8959-30

View part

HARDRACE Suspension struts HR8960

Upper suspension bar fits: VOLVO S60 II, V60 I FORD MONDEO IV, MONDEO V 1.0-3.0 03.07-03.22

View part

HARDRACE Stabilizer link HR8961

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

HARDRACE Suspension struts HR8964

Suspension struts fits: SKODA KODIAQ I VW TIGUAN 1.4-2.0D 01.16-

View part

HARDRACE Suspension struts HR8965

Body torsion bar (interior) fits: MAZDA 5 1.6D-2.3 02.05-

View part

HARDRACE Suspension struts HR8966

Upper suspension bar fits: HONDA CR-V V 1.5 12.16-

View part

HARDRACE Engine bracket HR8967

Reinforced engine pad, fits: MERCEDES E T-MODEL (S211), E (W211) 1.8-6.3 03.02-07.09

View part

HARDRACE Engine bracket HR8968

Reinforced engine pad, fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HARDRACE Engine bracket HR8969

Reinforced engine pad, fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HARDRACE Stabilizer link HR8970

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: HONDA CR-V I 2.0 10.95-02.02

View part

HARDRACE Track control arm HR8971

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Suspension struts HR8972

Upper suspension bar fits: TOYOTA SIENNA 3.5 01.11-

View part

HARDRACE Stabilizer link HR8973

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: BMW 5 (F10), 5 GRAN TURISMO (F07), 6 (F12), 6 (F13), 6 GRAN COUPE (F06), 7 (F01, F02, F03, F04) 1.6-6.0 02.08-10.18

View part

HARDRACE Track control arm HR8974

Reinforced swingarm, quantity per set: 2, front, bottom/rear L/R } (rubber-metal reinforced bush) fits: BMW 5 (F10), 5 (F11), 5 GRAN TURISMO (F07), 6 (F12), 6 (F13) 2.0-4.4 06.09-10.18

View part

HARDRACE Track control arm HR8975

Reinforced swingarm, quantity per set: 2, front, bottom/front L/R } (rubber-metal reinforced bush) fits: BMW 5 (F10), 5 (F11), 5 GRAN TURISMO (F07), 6 (F12), 6 (F13) 2.0-4.4 01.09-10.18

View part

HARDRACE Suspension struts HR8976

Upper suspension bar fits: SUBARU FORESTER 2.0/2.0D/2.0LPG 03.13-

View part

HARDRACE Front ball joint HR8978

Axle ball joint L (bottom front) (Height: + 40mm) fits: AUDI A3, Q3 SEAT ALTEA, ALTEA XL, LEON, LEON SPORTSTOURER, TOLEDO III SKODA OCTAVIA II, OCTAVIA III, SCALA, SUPERB II, YETI 1.0-3.6 02.03-

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account