Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Track control arm HR8754

Reinforced swingarm, quantity per set: 2, front, bottom L/R, UNIBALL } (adjusted) fits: HONDA CIVIC IV 1.3-1.6 09.87-12.91

View part

HARDRACE Track control arm HR8757

Reinforced swingarm, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: NISSAN ARMADA MK I, PATHFINDER III, TITAN 2.5D-5.6 08.03-

View part

HARDRACE Track control arm HR8764

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: HYUNDAI GENESIS 2.0/3.8 01.08-

View part

HARDRACE Track control arm HR8766

Reinforced swingarm, quantity per set: 2, front L/R } fits: FORD USA F-250 4.9/7.3D 10.91-09.96

View part

HARDRACE Track control arm HR8767

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: BMW 3 (E36), 3 (E46), X3 (E83), Z4 (E85), Z4 (E86), Z4 (E89) 1.6-3.2 09.90-08.16

View part

HARDRACE Track control arm HR8768

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: BMW 3 (E36), 3 (E46), Z4 (E85), Z4 (E86), Z4 (E89) 1.6-3.2 09.90-08.16

View part

HARDRACE Engine bracket HR8771

Reinforced engine pad,

View part

HARDRACE Other elements of suspension system HR8772

View part

HARDRACE Other elements of suspension system HR8773

View part

HARDRACE Suspension struts HR8774

Lower suspension bar fits: HONDA HR-V 1.5/1.5H/1.6D 08.15-

View part

HARDRACE Suspension struts HR8775

Lower suspension bar fits: HONDA HR-V 1.5/1.6D 08.15-

View part

HARDRACE Suspension ball joint HR8776

Reinforced suspension pin, quantity per set: 2 pcs, bottom, L/R} fits: HONDA CIVIC IX 2.0 08.15-12.16

View part

HARDRACE Stabilizer HR8778

Stabilizer, rear thickness: 25,4mm, strengthened sleeves fits: AUDI Q2 SKODA KAROQ, KODIAQ I, OCTAVIA III, SUPERB III VW ARTEON, GOLF VII, PASSAT ALLTRACK B8, PASSAT B8, TIGUAN 1.4-2.0D 08.12-

View part

HARDRACE Stabilizer HR8779

Stabilizer, front, 28 mm fits: SUBARU XV 1.6/2.0/2.0D 03.12-12.17

View part

HARDRACE Stabilizer HR8781

Stabilizer, front, 30 mm fits: SKODA SUPERB III VW TIGUAN 1.4/2.0/2.0D 03.15-06.24

View part

HARDRACE Stabilizer link HR8784

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: NISSAN 370Z 3.7 06.09-

View part

HARDRACE Engine bracket HR8785

Reinforced engine pad,

View part

HARDRACE Suspension ball joint HR8787

Reinforced suspension pin} fits: TOYOTA CELICA, COROLLA, COROLLA VERSO 1.4-2.0D 08.99-03.08

View part

HARDRACE Suspension ball joint HR8789

Reinforced suspension pin} fits: TOYOTA CAMRY 2.0-3.5 08.01-

View part

HARDRACE Suspension ball joint HR8790

Reinforced suspension pin} fits: TOYOTA CAMRY 2.0-3.5 08.01-

View part

HARDRACE Stabilizer link HR8791

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: HONDA CIVIC V, CIVIC VI 1.5/1.6 01.92-03.01

View part

HARDRACE Suspension struts HR8792

Lower suspension bar fits: HONDA CIVIC VI 1.4/1.5/1.6 11.95-03.01

View part

HARDRACE Suspension struts HR8792-BLK

Suspension struts fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Stabilizer link HR8793-095

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: VOLVO V90 II HYUNDAI SANTA FÉ III 2.0-2.4 09.12-12.22

View part

HARDRACE Stabilizer link HR8793-110

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 104-130mm) fits: INFINITI QX70 LEXUS LS, RX 2.0-5.0 12.89-

View part

HARDRACE Stabilizer link HR8793-140

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 123-162mm) fits: VOLVO S60 I, V70 II, XC70 I FORD USA MUSTANG 2.0-5.0 11.99-04.23

View part

HARDRACE Stabilizer link HR8793-180

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 163-202mm) fits: VOLVO V90 II BMW 5 GRAN TURISMO (F07) 2.0-4.4 01.09-12.22

View part

HARDRACE Stabilizer link HR8793-220

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 203-242mm) fits: BMW 5 (G30, F90), 5 (G31) FORD USA MUSTANG SAAB 9-5 1.9D-5.0 09.97-

View part

HARDRACE Stabilizer link HR8793-260

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 243-282mm) fits: LEXUS RX NISSAN JUKE TESLA MODEL 3 TOYOTA AURIS, CAMRY 1.2-Electric 02.00-

View part

HARDRACE Stabilizer link HR8793-300

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 283-322mm) fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (A207) 1.0-Electric 01.01-

View part

HARDRACE Stabilizer link HR8793-340

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 323-362mm) fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), C (C204) 1.0-Electric 01.01-

View part

HARDRACE Stabilizer link HR8793-380

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 360-399mm)

View part

HARDRACE Stabilizer link HR8793-420

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 400-439mm)

View part

HARDRACE Engine bracket HR8794

Reinforced engine pad, fits: AUDI A4 ALLROAD B8, A4 B8, A5 1.8-4.2 06.07-01.17

View part

HARDRACE Stabilizer HR8795

Stabilizer, rear, 19 mm

View part

HARDRACE Suspension ball joint HR8796

Reinforced suspension pin}

View part

HARDRACE Uniball HR8797

Uniball swingarm bushings}

View part

HARDRACE Uniball HR8798

Uniball swingarm bushings}

View part

HARDRACE Stabilizer HR8799

Stabilizer, front, 25,4 mm fits: HONDA CIVIC IX 2.0 08.15-12.16

View part

HARDRACE Stabilizer HR8800

Stabilizer, rear, 17 mm fits: HONDA CIVIC IX 2.0 08.15-12.16

View part

HARDRACE Track control arm HR8801

Reinforced swingarm, quantity per set: 2 } fits: MAZDA 6, CX-5 2.0-2.5H 11.11-

View part

HARDRACE Track control arm HR8802

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MAZDA 3 1.5-2.5 07.13-05.19

View part

HARDRACE Stabilizer HR8803

Stabilizer, front, 30 mm

View part

HARDRACE Stabilizer HR8804

Stabilizer, rear, 25,4 mm

View part

HARDRACE Suspension struts HR8805

Body torsion bar fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

HARDRACE Stabilizer link HR8806

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: AUDI A1, A3, A3 ALLSTREET, Q2, Q3, TT CUPRA ATECA, FORMENTOR, LEON, LEON SPORTSTOURER, TERRAMAR 1.0-Electric 04.12-

View part

HARDRACE Track control arm HR8811

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR8812

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account