Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Track control arm HR8813

Reinforced swingarms set, quantity per set: 2, front L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR8814

Reinforced swingarms set, quantity per set: 2, rear axle, bottom L/R, UNIBALL } (adjusted)

View part

HARDRACE Stabilizer link HR8815

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 (length: 318mm) fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

HARDRACE Uniball HR8817

Uniball swingarm bushings} fits: HYUNDAI ELANTRA V 1.6/1.6D/1.8 09.10-12.16

View part

HARDRACE Other elements of brake system HR8818

Other elements of brake system, Metal fits: SUBARU LEGACY VI, OUTBACK 2.0 D AWD (BSD)/2.5 AWD (BS9)/2.5 i AWD (BN9)/3.6 AWD (BSF)/3.6 i AWD (BNF) 10.14-

View part

HARDRACE Track control arm HR8819

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: SUBARU FORESTER, IMPREZA, LEGACY V 2.0-2.5CNG 01.08-

View part

HARDRACE Track control arm HR8820

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: SUBARU FORESTER, IMPREZA, LEGACY V 2.0-2.5CNG 01.08-

View part

HARDRACE Uniball HR8821

Uniball swingarm bushings} fits: TOYOTA ARISTO 3.0 08.97-09.04

View part

HARDRACE Uniball HR8822

Uniball swingarm bushings} fits: TOYOTA ARISTO 3.0 08.97-09.04

View part

HARDRACE Suspension struts HR8823

Upper suspension bar (Differential trolley brackets) fits: SUBARU FORESTER 2.0/2.0D/2.0LPG 03.13-

View part

HARDRACE Engine bracket HR8825

Reinforced engine pad, fits: AUDI A1, A3, TT SKODA FABIA II, FABIA II PRAKTIK, FABIA III, FABIA III PRAKTIK VW POLO V 1.0-3.2 09.96-12.22

View part

HARDRACE Engine bracket HR8826

Reinforced engine pad, fits: AUDI A1, A3, TT SKODA FABIA II, FABIA II PRAKTIK, FABIA III, FABIA III PRAKTIK VW POLO V 1.0-3.2 09.96-12.22

View part

HARDRACE Stabilizer HR8827

Stabilizer, front, 28 mm fits: BMW 3 (E90) 1.6-4.4 12.04-12.11

View part

HARDRACE Stabilizer HR8828

Stabilizer, rear, 22 mm fits: BMW 3 (E90), 3 (E92) 1.6-4.4 12.04-12.13

View part

HARDRACE Track control arm HR8829

Reinforced swingarm, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR8830

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Engine bracket HR8831

Reinforced engine pad, fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Stabilizer link HR8832

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 (length: 260mm) fits: TOYOTA CAMRY 2.0-3.5 01.06-03.18

View part

HARDRACE Polyurethane suspension sleeve HR8833

Polyurethane bushing, fits: HYUNDAI ELANTRA V 1.6/1.6D/1.8 09.10-12.16

View part

HARDRACE Suspension struts HR8834

Upper suspension bar fits: LEXUS ES TOYOTA CAMRY 2.0-3.5 06.04-

View part

HARDRACE Track control arm HR8835

Reinforced swingarm, quantity per set: 2, rear, top L/R } (adjustable camber angle) fits: LEXUS GS, IS III 2.0-5.0 01.12-

View part

HARDRACE Track control arm HR8836

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: FORD KUGA II LEXUS GX TOYOTA 4 RUNNER IV, FJ CRUISER 1.5-4.7 11.01-12.19

View part

HARDRACE Track control arm HR8837

Reinforced swingarm, quantity per set: 2, rear, top L/R } (adjustable camber angle)

View part

HARDRACE Track control arm HR8838

Reinforced swingarm, quantity per set: 2, rear, bottom L/R } (adjustable camber angle)

View part

HARDRACE Track control arm HR8839

Reinforced swingarm, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: LEXUS GX TOYOTA 4 RUNNER IV, FJ CRUISER 4.0/4.7 11.01-01.18

View part

HARDRACE Uniball HR8840

Uniball swingarm bushings}

View part

HARDRACE Stabilizer HR8842

Stabilizer, front, 28 mm fits: FORD FOCUS III, KUGA II 1.5-2.0D 07.12-12.19

View part

HARDRACE Suspension struts HR8843

Suspension struts fits: MAZDA 3, 5 1.3-2.3 10.03-

View part

HARDRACE Engine bracket HR8844

Reinforced engine pad, fits: MITSUBISHI GALANT VIII 2.0 09.96-10.04

View part

HARDRACE Stabilizer link HR8846

Stabilizer link front L (for low vehicles shorter by 10mm) fits: HONDA HR-V 1.5-1.8 11.14-

View part

HARDRACE Suspension struts HR8848

Upper suspension bar fits: FORD KUGA II 1.5-2.0D 10.12-12.19

View part

HARDRACE Engine bracket HR8849

Reinforced engine pad, fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Track control arm HR8850

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: SUZUKI SWIFT IV 1.2/1.6 10.10-04.17

View part

HARDRACE Track control arm HR8851

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR8852

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: SUZUKI SWIFT IV 1.2/1.6 10.10-04.17

View part

HARDRACE Track control arm HR8853

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: TOYOTA RAV 4 IV 2.0-2.5H 12.12-09.19

View part

HARDRACE Track control arm HR8854

Reinforced swingarm, quantity per set: 2, front, bottom/front L/R } (strengthened sleeves) fits: BMW 1 (E82), 3 (E90), 3 (E92), 3 (E93) 3.0/4.0/4.4 03.07-10.13

View part

HARDRACE Track control arm HR8855

Reinforced swingarm, quantity per set: 2, front, bottom/rear L/R } (rubber-metal reinforced bush) fits: BMW 3 (E90), 3 (E92), 3 (E93) 4.0/4.4 03.07-10.13

View part

HARDRACE Stabilizer HR8856

Stabilizer, rear, 25,4 mm (set) fits: HONDA CIVIC V 1.6 10.91-11.95

View part

HARDRACE Engine bracket HR8861

Reinforced engine pad, fits: TOYOTA CAMRY 3.5 01.06-12.17

View part

HARDRACE Track control arm HR8862

Reinforced swingarm, quantity per set: 2, front, bottom L/R, UNIBALL } (adjustable camber angle) fits: LEXUS GS, IS II 2.2D-5.0 04.05-03.13

View part

HARDRACE Stabilizer link HR8863-260

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 240-279mm) fits: FORD FOCUS II, FOCUS III MAZDA 3 1.0-Electric 10.03-02.20

View part

HARDRACE Stabilizer link HR8863-300

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 280-319mm) fits: FORD FOCUS II, FOCUS III MAZDA 3 1.0-Electric 10.03-02.20

View part

HARDRACE Other elements of suspension system HR8864

View part

HARDRACE Stabilizer HR8865

Stabilizer, front, 28 mm

View part

HARDRACE Wheel suspension track control arm, front HR8866

Front axle track control arm R top front (rubber-metal reinforced bush) fits: NISSAN NAVARA NP300, PATHFINDER III 2.3D-4.0 10.04-

View part

HARDRACE Stabilizer link HR8867

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: TOYOTA 4 RUNNER V 2.7/4.0 09.09-

View part

HARDRACE Suspension struts HR8868

Upper suspension bar fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account