Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Stabilizer HR8697

Stabilizer, rear, 25,4 mm (4WD vehicles) fits: MITSUBISHI OUTLANDER II 2.0-3.0 11.06-11.12

View part

HARDRACE Suspension struts HR8698

Upper suspension bar fits: LEXUS NX TOYOTA RAV 4 IV 2.0-2.5H 12.12-

View part

HARDRACE Suspension struts HR8699

Lower suspension bar fits: LEXUS NX 2.0 07.14-

View part

HARDRACE Suspension struts HR8701

Body torsion bar fits: LEXUS NX 2.0 07.14-

View part

HARDRACE Suspension struts HR8702

Lower suspension bar fits: LEXUS NX 2.0 07.14-

View part

HARDRACE Stabilizer HR8708

Stabilizer, front, 32 mm (ATS-V vehicles) fits: CADILLAC ATS 3.6 04.15-

View part

HARDRACE Stabilizer HR8709

Stabilizer, rear, 32 mm fits: CADILLAC ATS 3.6 04.15-

View part

HARDRACE Suspension struts HR8710

Upper suspension bar fits: MITSUBISHI LANCER VIII 1.5-2.0D 01.08-

View part

HARDRACE Stabilizer HR8711

Stabilizer, rear, 17 mm fits: HONDA HR-V 1.5/1.6D 08.15-

View part

HARDRACE Suspension ball joint HR8712

Reinforced suspension pin}

View part

HARDRACE Suspension ball joint HR8713

Reinforced suspension pin} fits: FORD MONDEO IV 1.6-2.5 03.07-01.15

View part

HARDRACE Stabilizer HR8714

Stabilizer, front, 28 mm fits: TOYOTA WISH 1.8 04.03-03.09

View part

HARDRACE Engine bracket HR8715

Reinforced engine pad, fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Engine bracket HR8716

Reinforced engine pad, fits: NISSAN 300ZX, SILVIA, SKYLINE 2.0/2.5/3.0 03.89-12.03

View part

HARDRACE Engine bracket HR8717

Reinforced engine pad, fits: NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Engine bracket HR8718

Reinforced engine pad 1 pcs, rear, fits: MITSUBISHI LANCER VIII 2.0 03.07-

View part

HARDRACE Engine bracket HR8719

Reinforced engine pad, fits: MAZDA 3 1.5/1.5D/2.0 07.13-05.19

View part

HARDRACE Polyurethane suspension sleeve HR8720

Reinforced bushing (2pcs, front axle, L/R, rear) fits: MAZDA 3, 6, CX-5 11.11-

View part

HARDRACE Track control arm HR8721

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: LEXUS NX TOYOTA RAV 4 IV 2.0-2.5H 12.12-

View part

HARDRACE Engine bracket HR8722

Reinforced engine pad 1 pcs, rear, fits: HONDA CIVIC X 1.0-2.0 08.16-12.22

View part

HARDRACE Stabilizer HR8724

Stabilizer, front, 30 mm fits: HYUNDAI TUCSON 1.6-2.0D 06.15-05.23

View part

HARDRACE Stabilizer HR8725

Stabilizer, rear, 25,4 mm fits: HYUNDAI TUCSON 1.6-2.0D 06.15-05.23

View part

HARDRACE Tie rod (with no end) HR8727

Reinforced steering end, quantity per set: 2 pcs, L/R fits: TOYOTA fits: LEXUS SC TOYOTA SUPRA 3.0/4.3 05.93-07.10

View part

HARDRACE Track control arm HR8728

Reinforced swingarm, quantity per set: 2, rear, top L/R } (rubber-metal reinforced bush) fits: BMW 5 (F10), 5 (F11), 5 GRAN TURISMO (F07), 6 (F12), 6 (F13), 6 GRAN COUPE (F06) 1.6-6.0 02.08-10.18

View part

HARDRACE Wheel suspension track control arm, rear HR8729

Rear axle track control arm fits: BMW 5 (F10), 5 (F11), 5 GRAN TURISMO (F07), 6 (F12), 6 (F13), 6 GRAN COUPE (F06), 7 (F01, F02, F03, F04) 2.0-6.0 02.08-10.18

View part

HARDRACE Other elements of suspension system HR8730

View part

HARDRACE Engine bracket HR8731

Reinforced engine pad, fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Stabilizer HR8732

Stabilizer, front, 30 mm fits: LEXUS IS I 2.0/3.0 04.99-07.05

View part

HARDRACE Stabilizer HR8733

Stabilizer, rear, 17 mm fits: LEXUS IS I 2.0/3.0 04.99-07.05

View part

HARDRACE Uniball HR8734

Uniball swingarm bushings} fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Uniball HR8735

Uniball swingarm bushings} fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Uniball HR8736

Uniball swingarm bushings} fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Track control arm HR8737

Reinforced swingarm, quantity per set: 2, rear, bottom R } (adjustable camber angle) fits: HONDA CR-V I 2.0 10.95-02.02

View part

HARDRACE Stabilizer HR8738

Stabilizer, front, 25,4 mm fits: HONDA CIVIC IX 1.8 02.12-12.16

View part

HARDRACE Track control arm HR8739

Reinforced swingarm, quantity per set: 2, rear, top L/R, UNIBALL } (adjustable camber angle) fits: INFINITI G NISSAN 350Z, 370Z 3.5/3.7 09.02-

View part

HARDRACE Engine bracket HR8741

Reinforced engine pad, fits: BMW 3 (E46) 2.5/3.0/3.0D 03.98-07.06

View part

HARDRACE Track control arm HR8742

Reinforced swingarm, quantity per set: 2, rear, top L/R, UNIBALL } (adjustable camber angle) fits: MINI (F56) 1.2-2.0D 12.13-

View part

HARDRACE Uniball HR8743

Uniball swingarm bushings} fits: MITSUBISHI ECLIPSE CROSS, LANCER VII, OUTLANDER II, OUTLANDER III 1.5-2.4H 06.00-

View part

HARDRACE Uniball HR8744

Uniball swingarm bushings} fits: MITSUBISHI ECLIPSE CROSS, LANCER VII, OUTLANDER II, OUTLANDER III 1.5-2.4H 06.00-

View part

HARDRACE Engine bracket HR8745

Reinforced engine pad, fits: FORD MONDEO IV 2.0-2.0LPG 03.07-01.15

View part

HARDRACE Track control arm HR8746

Reinforced swingarm, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: FORD RANGER 2.2D/3.2D 04.11-

View part

HARDRACE Track control arm HR8747

Reinforced swingarm, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: TOYOTA HILUX VI, HILUX VII, HILUX VIII, TACOMA 2.4-4.0 08.97-

View part

HARDRACE Track control arm HR8748

Reinforced swingarm, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: LEXUS GX TOYOTA 4 RUNNER IV, FJ CRUISER 4.0/4.7 11.01-01.18

View part

HARDRACE Tie rod (with no end) HR8749

Reinforced steering end, quantity per set: 2 pcs, L/R fits: HONDA fits: HONDA S2000, STEPWGN 2.0/2.2 05.96-

View part

HARDRACE Track control arm HR8750

Reinforced swingarms set, quantity per set: 2, rear axle/top L/R } (adjustable rubber-metal reinforced bush) fits: HONDA S2000 2.0 06.99-06.09

View part

HARDRACE Track control arm HR8751

Reinforced swingarm, quantity per set: 2, front, top L/R } (for raised vehicles) fits: MITSUBISHI PAJERO SPORT II 2.5D-3.5 07.08-

View part

HARDRACE Track control arm HR8752

Reinforced swingarm, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: CHEVROLET COLORADO ISUZU D-MAX II 1.9D/2.5D/5.3 09.08-12.22

View part

HARDRACE Track control arm HR8753

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC IV, CRX II 1.3-1.6 09.87-02.92

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account