Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Track control arm HR8648

Reinforced swingarm, quantity per set: 2, rear L/R, UNIBALL } (adjustable camber angle) fits: HONDA CIVIC X 1.0/1.5/2.0 02.17-12.22

View part

HARDRACE Track control arm HR8649-S

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: HONDA CIVIC X 1.0-2.0 09.15-

View part

HARDRACE Stabilizer HR8650

Stabilizer, rear, 25,4 mm (4WD vehicles) fits: MERCEDES A (W176) 2.0/2.2D 06.13-05.18

View part

HARDRACE Engine bracket HR8651

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Engine bracket HR8652

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Engine bracket HR8653

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Engine bracket HR8654

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Stabilizer link HR8655

Stabilizer link rear L/R fits: HONDA CIVIC X, CIVIC XI, CR-V V, ZR-V 1.0-2.0H 06.16-

View part

HARDRACE Stabilizer HR8656

Stabilizer, front, 28 mm fits: HONDA JAZZ II, JAZZ III 1.2-1.4 03.02-12.15

View part

HARDRACE Uniball HR8657

Uniball swingarm bushings} fits: MAZDA MX-5 IV, MX-5 RF TARGA 1.5/2.0 06.15-

View part

HARDRACE Stabilizer link HR8659-140

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 125-164mm M10) fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 2 (G42, G87) 1.5-Electric 06.08-

View part

HARDRACE Stabilizer link HR8659-180

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 160-199mm M10) fits: ALFA ROMEO 147, 156, GT MAZDA 323 F VI, 323 S VI, PREMACY 1.3-3.2 12.89-09.10

View part

HARDRACE Stabilizer link HR8659-220

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 200-239mm M10) fits: HONDA CIVIC VIII KIA PICANTO I LEXUS RX MINI (R50, R53) 1.0-3.5 06.01-

View part

HARDRACE Stabilizer link HR8659-240

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: BMW 3 (E30), 3 (E36), 5 (E28), 5 (E34), 7 (E32) 1.6-5.0 05.81-08.00

View part

HARDRACE Stabilizer link HR8659-260

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 240-279mm M10) fits: AUDI A1 BMW 3 (E46), Z4 (E85), Z4 (E86) FORD FIESTA VI MAZDA 2 1.0-3.2 12.97-

View part

HARDRACE Stabilizer link HR8659-300

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 280-319mm M10) fits: VOLVO S80 II, V40, V60 I, V70 III, XC70 II BMW 1 (E81) 1.0-Electric 12.01-

View part

HARDRACE Stabilizer link HR8659-340

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 320-359mm M10) fits: VOLVO V70 II, XC70 I HONDA CIVIC IX, CIVIC XI, HR-V PEUGEOT 206 1.0-2.5D 11.97-

View part

HARDRACE Stabilizer link HR8659-380

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 360-399mm M10) fits: BMW Z4 (G29) 2.0/3.0 11.18-

View part

HARDRACE Stabilizer link HR8659-420

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 400-439mm M10)

View part

HARDRACE Suspension ball joint HR8660

Reinforced suspension pin}

View part

HARDRACE Parts, accessories for pressure washers HR8664

View part

HARDRACE Stabilizer HR8665

Stabilizer, rear, 25,4 mm (hybrid vehicles) fits: TOYOTA RAV 4 IV 2.5H 11.15-11.18

View part

HARDRACE Track control arm HR8667

Reinforced swingarm, quantity per set: 2, front, top L/R, UNIBALL } (adjustable camber angle) fits: MAZDA RX-7 III 1.3 07.92-08.02

View part

HARDRACE Track control arm HR8668

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable camber angle) fits: SMART FORFOUR, FORTWO 0.9/1.0/Electric 07.14-

View part

HARDRACE Engine bracket HR8669

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Engine bracket HR8670

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Engine bracket HR8671

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Engine bracket HR8674

Reinforced engine pad, fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Engine bracket HR8675

Reinforced engine pad, fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Engine bracket HR8676

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Engine bracket HR8677

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Engine bracket HR8678

Reinforced engine pad, fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

HARDRACE Track control arm HR8680

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (With adjustable stabilizer link) fits: NISSAN 200SX, 240SX 1.8/2.4 07.88-

View part

HARDRACE Track control arm HR8681

Reinforced swingarm, quantity per set: 2, front, bottom L/R } (With adjustable stabilizer link) fits: NISSAN 200SX, 240SX, SILVIA 1.8/2.0/2.4 07.88-

View part

HARDRACE Stabilizer HR8682

Stabilizer, front, 36 mm fits: INFINITI Q50 2.0 04.14-

View part

HARDRACE Stabilizer HR8683

Stabilizer, rear, 25,4 mm fits: INFINITI Q50, Q70 2.0-3.7 03.13-

View part

HARDRACE Stabilizer HR8684

Stabilizer, rear, 25,4 mm fits: FORD MONDEO V 1.0-2.0H 09.14-03.22

View part

HARDRACE Track control arm HR8685

Reinforced swingarm, quantity per set: 2, rear, top L/R } (adjustable camber angle) fits: BMW 3 (E36), X3 (E83), X5 (E53) 1.6-4.8 01.94-08.08

View part

HARDRACE Engine bracket HR8686

Reinforced engine pad, fits: MITSUBISHI OUTLANDER II 2.0-2.4ALK 11.06-11.12

View part

HARDRACE Track control arm HR8687

Reinforced swingarm, quantity per set: 2, front L/R } fits: NISSAN 280ZX,ZXT 2.8 10.78-02.84

View part

HARDRACE Torsion bar HR8688

View part

HARDRACE Track control arm HR8689

Reinforced swingarm, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted) fits: NISSAN 200SX, SILVIA, SKYLINE 2.0/2.5 07.93-12.03

View part

HARDRACE Track control arm HR8691

Reinforced swingarm, quantity per set: 2, rear L/R } fits: LEXUS RX TOYOTA HIGHLANDER 2.0-3.5 09.03-12.17

View part

HARDRACE Track control arm HR8692

Reinforced swingarm, quantity per set: 2, rear, top L/R, UNIBALL } (adjustable camber angle)

View part

HARDRACE Track control arm HR8693

Reinforced swingarm, quantity per set: 2, rear, top L/R } (adjustable camber angle)

View part

HARDRACE Track control arm HR8694

Reinforced swingarm, quantity per set: 2, rear, UNIBALL } (adjustable camber angle)

View part

HARDRACE Track control arm HR8695

Reinforced swingarm, quantity per set: 2, rear, bottom L/R } (adjustable camber angle)

View part

HARDRACE Suspension ball joint HR8696

Reinforced suspension pin}

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account