Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Engine bracket HR7628

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7629

Reinforced engine pad,

View part

HARDRACE Uniball HR7630

Uniball swingarm bushings, quantity per set: 4 pcs, front axle, L/R, lower swingarm} fits: HONDA CIVIC VII, CR-V II 1.4-2.4 11.00-03.07

View part

HARDRACE Uniball HR7634

Uniball swingarm bushings, quantity per set: 2 pcs, front axle, L/R, lower swingarm} fits: HONDA CIVIC VII, CIVIC VIII, CR-V II, FR-V 1.3-2.4 11.00-12.13

View part

HARDRACE Engine bracket HR7635

Reinforced engine pad,

View part

HARDRACE Suspension ball joint HR7636

Reinforced suspension pin}

View part

HARDRACE Engine bracket HR7637

Reinforced engine pad, fits: MITSUBISHI GALANT VII 1.8-2.5 11.92-08.96

View part

HARDRACE Track control arm HR7638

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR7639

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR7640

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR7641

Reinforced swingarms set, quantity per set: 2, front L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR7642

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Engine bracket HR7643

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Track control arm HR7645

Reinforced swingarms set, quantity per set: 2, front L/R } (strengthened sleeves)

View part

HARDRACE Polyurethane suspension sleeve HR7647

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Polyurethane suspension sleeve HR7648

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Polyurethane suspension sleeve HR7649

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Engine bracket HR7650

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV 2.0-3.0 03.97-

View part

HARDRACE Suspension ball joint HR7651

Reinforced suspension pin} fits: VOLVO V40 FORD FOCUS II, FOCUS III, KUGA II 1.0-2.5 07.04-02.20

View part

HARDRACE Suspension ball joint HR7652

Reinforced suspension pin} fits: VOLVO V40 FORD FOCUS II, FOCUS III 1.0-2.5 04.05-02.20

View part

HARDRACE Suspension ball joint HR7653

Reinforced suspension pin} fits: VOLVO V40 FORD FOCUS II, FOCUS III 1.0-2.5 04.05-02.20

View part

HARDRACE Stabilizer link HR7654

Stabilizer link rear L/R 255mm fits: FORD MONDEO III 1.8-3.0 10.00-03.07

View part

HARDRACE Stabilizer link HR7655

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, GALAXY MK II, KUGA II 1.5-4.4 03.06-12.19

View part

HARDRACE Suspension ball joint HR7657

Reinforced suspension pin, quantity per set: 2 pcs, front}, from bottom (lifted by 30 mm) fits: LEXUS GS TOYOTA ARISTO 3.0/4.0/4.3 08.97-12.04

View part

HARDRACE Suspension ball joint HR7658

Reinforced suspension pin}

View part

HARDRACE Suspension ball joint HR7659

Reinforced suspension pin}

View part

HARDRACE Suspension ball joint HR7660

Reinforced suspension pin} fits: MITSUBISHI OUTLANDER II 2.0-2.4ALK 11.06-11.12

View part

HARDRACE Stabilizer HR7661

Stabilizer, front, 25,4 mm fits: MITSUBISHI ECLIPSE CROSS, OUTLANDER II, OUTLANDER III 1.5-3.0 11.06-

View part

HARDRACE Polyurethane suspension sleeve HR7662

Reinforced bushing, 2pcs, fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14

View part

HARDRACE Track control arm HR7663

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Track control arm HR7664

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Track control arm HR7665

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Engine bracket HR7666

Reinforced engine pad,

View part

HARDRACE Polyurethane suspension sleeve HR7667

Reinforced suspension bushings (2pcs, front/front bottom swingarm, L/R) fits: HONDA CIVIC VIII 09.05-12.13

View part

HARDRACE Engine bracket HR7668

Reinforced engine pad,

View part

HARDRACE Stabilizer HR7669

Stabilizer, rear, 22 mm fits: SUBARU FORESTER, IMPREZA, LEGACY V, LEVORG, OUTBACK, WRX, XV 1.6-3.6 01.08-

View part

HARDRACE Track control arm HR7670

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Engine bracket HR7671

Reinforced engine pad, fits: MITSUBISHI LANCER VII 2.0 04.03-09.07

View part

HARDRACE Engine bracket HR7672

Reinforced engine pad, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Track control arm HR7675

Reinforced swingarms set, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR7677

Reinforced swingarms set, quantity per set: 2, front L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR7678

Reinforced swingarms set, quantity per set: 2, front L/R, UNIBALL } (adjusted)

View part

HARDRACE Suspension ball joint HR7679

Reinforced suspension pin} fits: SUZUKI SWIFT VI 1.2H 12.23-

View part

HARDRACE Track control arm HR7680

Reinforced swingarms set, quantity per set: 2 }

View part

HARDRACE Tie rod (with no end) HR7681

Reinforced steering rods,

View part

HARDRACE Tie rod (with no end) HR7682

Reinforced steering end, quantity per set: 2 pcs, L/R fits: NISSAN 350Z 3.5 09.02-12.08

View part

HARDRACE Tie rod (with no end) HR7683

Reinforced steering rods,

View part

HARDRACE Track control arm HR7684

Reinforced swingarms set, quantity per set: 2, front axle, top L/R, UNIBALL } (adjusted) fits: HONDA ACCORD IV, ACCORD V 1.8-2.3 01.90-10.98

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account