Partios Wholesale catalogue
Hardrace Distributor | Suspension & Steering
Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)
3,272 current catalogue lines
About the HARDRACE range
Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.
Catalogue products
Vehicle references are indicative — confirm against the article number.
HARDRACE Engine bracket HR7685
Reinforced engine pad, fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F32, F82), 4 (F33, F83), 4 GRAN COUPE (F36) 1.5-3.0H 07.11-
View partHARDRACE Track control arm HR7686
Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)
View partHARDRACE Engine bracket HR7687
Reinforced engine pad,
View partHARDRACE Stabilizer HR7688
Stabilizer, front, 28 mm fits: SUBARU FORESTER 2.0/2.0D 03.13-
View partHARDRACE Track control arm HR7689
Reinforced swingarms set, quantity per set: 2, front, top L/R } fits: HONDA ACCORD VI 2.0/3.0 02.98-06.03
View partHARDRACE Stabilizer HR7691
Stabilizer, front, 25,4 mm fits: MAZDA CX-5, CX-9 2.0-3.7 09.06-
View partHARDRACE Stabilizer HR7693
Stabilizer, front, 30 mm fits: LEXUS IS II 2.2D/2.5/3.5 08.05-03.13
View partHARDRACE Stabilizer HR7694
Stabilizer, front, 30 mm fits: LEXUS GS, IS II 2.2D-4.6 04.05-03.13
View partHARDRACE Stabilizer HR7695
Stabilizer, rear, 19 mm fits: LEXUS IS II 2.2D-5.0 08.05-03.13
View partHARDRACE Track control arm HR7696
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: MAZDA 6 2.0/2.2D/2.5 08.12-
View partHARDRACE Track control arm HR7697
Reinforced swingarms set, quantity per set: 2, rear axle, top L/R, UNIBALL } (adjustable rubber-metal reinforced bush) fits: MERCEDES E T-MODEL (S211), E (W211) 1.8-6.2 03.02-07.09
View partHARDRACE Suspension ball joint HR7698
Reinforced suspension pin} fits: FORD FIESTA VI MAZDA 2 1.0-1.6D 07.07-01.18
View partHARDRACE Tie rod (with no end) HR7699
Reinforced steering rods,
View partHARDRACE Track control arm HR7700
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)
View partHARDRACE Track control arm HR7701
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: MITSUBISHI LANCER VII 1.6/2.0 06.00-12.13
View partHARDRACE Track control arm HR7702
Reinforced swingarm, quantity per set: 2, front axle, bottom L/R } fits: FORD FIESTA, FIESTA V, FIESTA VI MAZDA 2 1.0-1.6D 10.03-01.18
View partHARDRACE Track control arm HR7702-CN
Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: FORD FIESTA VI 1.6 03.13-04.17
View partHARDRACE Track control arm HR7703
Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: NISSAN CUBE 1.5D/1.6 08.09-
View partHARDRACE Polyurethane suspension sleeve HR7704
Reinforced bushing, 2pcs, fits: VOLVO V40 FORD FOCUS II, FOCUS III MAZDA 3 1.0-2.5 10.03-02.20
View partHARDRACE Track control arm HR7706
Reinforced swingarms set, quantity per set: 2, front axle, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC VIII 1.4-2.2D 09.05-01.12
View partHARDRACE Engine bracket HR7707
Reinforced engine pad,
View partHARDRACE Polyurethane suspension sleeve HR7708
Reinforced bushing, 2pcs, fits: VOLVO C70 II, V40 FORD FOCUS II, FOCUS III MAZDA 3 1.0-2.5 10.03-02.20
View partHARDRACE Engine bracket HR7709
Reinforced engine pad, fits: FORD FIESTA VI MAZDA 2 1.0-1.6D 07.07-01.18
View partHARDRACE Suspension struts HR7711
Lower suspension bar fits: HONDA JAZZ IV 1.3 09.15-
View partHARDRACE Track control arm HR7712
Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MITSUBISHI ECLIPSE CROSS, OUTLANDER II 1.5-2.4H 11.06-
View partHARDRACE Track control arm HR7714
Reinforced swingarm, quantity per set: 2, rear axle, bottom/front L/R, UNIBALL } (adjusted) fits: SUBARU IMPREZA, LEVORG 1.6/2.5 01.11-
View partHARDRACE Stabilizer HR7715
Stabilizer, front, 25,4 mm fits: AUDI A3 SEAT ALTEA, ALTEA XL, LEON SKODA OCTAVIA II, SUPERB II, YETI VW EOS, GOLF PLUS, GOLF PLUS V, GOLF V, GOLF VI, SCIROCCO III, TOURAN 1.2-3.6 05.03-12.17
View partHARDRACE Stabilizer HR7716
Stabilizer rear fits: AUDI Q3 SEAT ALTEA, ALTEA XL, LEON SKODA OCTAVIA II VW EOS, GOLF PLUS V, GOLF V, GOLF VI, JETTA III, PASSAT ALLTRACK B7, PASSAT B6, PASSAT B7 1.2-3.6 02.03-10.18
View partHARDRACE Track control arm HR7717
Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: AUDI A4 ALLROAD B8, A4 B8, A5, A6 ALLROAD C7, A6 C7 1.8-4.2 06.07-09.18
View partHARDRACE Stabilizer HR7719
Stabilizer, rear, 19 mm fits: HONDA CIVIC IX, CIVIC VIII 1.3H/1.8 09.05-12.16
View partHARDRACE Engine bracket HR7720
Reinforced engine pad, fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14
View partHARDRACE Stabilizer HR7721
Stabilizer, front, 28 mm fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 4 (F32, F82), 4 (F33, F83), 4 GRAN COUPE (F36) 1.5-2.0D 07.11-06.21
View partHARDRACE Stabilizer HR7722
Stabilizer, front, 28 mm fits: BMW 1 (F20), 1 (F21), 3 (F30, F80), 3 (F31) 2.0-3.0H 11.11-12.19
View partHARDRACE Stabilizer HR7723
Stabilizer rear fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F32, F82), 4 (F33, F83), 4 GRAN COUPE (F36) 1.5-3.0H 07.11-
View partHARDRACE Track control arm HR7724
Reinforced swingarms set, quantity per set: 8, front, top L/R } (rubber-metal reinforced bush)
View partHARDRACE Stabilizer HR7725
Stabilizer, front, 28 mm fits: SUBARU LEVORG 1.6 09.15-
View partHARDRACE Track control arm HR7726
Reinforced swingarms set, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush)
View partHARDRACE Track control arm HR7727
Reinforced swingarms set, quantity per set: 2, bottom/rear axle L/R } (adjusted rubber-metal reinforced bush) fits: LEXUS GS, IS I, IS II, SC TOYOTA ALTEZZA GITA, ARISTO 2.0-5.0 08.97-03.13
View partHARDRACE Engine bracket HR7728
Reinforced engine pad, fits: HONDA CIVIC IV 1.6 09.87-12.91
View partHARDRACE Engine bracket HR7729
Reinforced engine pad,
View partHARDRACE Engine bracket HR7730
Reinforced engine pad,
View partHARDRACE Track control arm HR7731
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: VOLVO XC60 I 2.0-3.2 05.08-12.17
View partHARDRACE Track control arm HR7732
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: MAZDA CX-7 2.2D/2.3 10.07-03.13
View partHARDRACE Front wishbone assembly HR7733
Suspension track control arm set fits: BMW 2 (F22, F87), 3 (F30, F80), 3 (G20, G80, G28), 3 (G21, G81), 4 (F32, F82), 4 (F33, F83), 4 (G22, G82), 4 (G23, G83) 3.0/3.0DH/3.0H 03.14-
View partHARDRACE Track control arm HR7734
Reinforced swingarms set, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted) fits: BMW 2 (F22, F87), 2 (G42, G87), 3 (F30, F80), 3 (G20, G80, G28), 3 (G21, G81), 4 (F32 3.0/3.0DH/3.0H 03.14-
View partHARDRACE Track control arm HR7735
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: BMW 1 (F40), 2 (F45), 2 GRAN COUPE (F44), 2 GRAN TOURER (F46), 2 GRAN TOURER VAN (F46), X1 (F48) 1.2-2.0D 09.13-
View partHARDRACE Engine bracket HR7737
Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY V, XV 1.6-2.5 07.10-
View partHARDRACE Stabilizer HR7738
Stabilizer, rear, 22 mm fits: FORD KUGA II 1.5-2.0D 03.13-12.19
View partBuying with Partios
Buying HARDRACE parts through Partios
Are these genuine HARDRACE parts?
- Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source HARDRACE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.
Do you supply HARDRACE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on HARDRACE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a HARDRACE order?
- It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for HARDRACE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account