Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Engine bracket HR7576

Reinforced engine pad, fits: NISSAN SKYLINE 2.0/2.5 03.89-07.00

View part

HARDRACE Engine bracket HR7577

Reinforced engine pad,

View part

HARDRACE Track control arm HR7580

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: MITSUBISHI OUTLANDER II 2.0-2.4ALK 11.06-11.12

View part

HARDRACE Polyurethane suspension sleeve HR7581

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, IMPREZA, LEGACY V, XV 1.6-2.5CNG 01.08-

View part

HARDRACE Engine bracket HR7583

Reinforced engine pad, fits: BMW X5 (E70), X6 (E71, E72) 3.0-4.8 10.06-07.14

View part

HARDRACE Polyurethane suspension sleeve HR7584

Reinforced bushing, 2pcs, fits: SUBARU LEGACY VI 2.5/3.6 01.15-

View part

HARDRACE Polyurethane suspension sleeve HR7585

Reinforced bushing, 2pcs, fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14

View part

HARDRACE Engine bracket HR7586

Reinforced engine pad, fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Engine bracket HR7587

Reinforced engine pad, fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Engine bracket HR7588

Reinforced engine pad, fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Engine bracket HR7589

Reinforced engine pad, fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Suspension ball joint HR7590

Reinforced suspension pin} fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Track control arm HR7591

Reinforced swingarm, quantity per set: 2, front axle, top L/R } (adjustable, reinforced metal-rubber bushings) fits: ACURA TL HONDA ACCORD VIII 2.0-3.5 06.08-

View part

HARDRACE Engine bracket HR7592

Reinforced engine pad,

View part

HARDRACE Track control arm HR7593

Reinforced swingarm, quantity per set: 2, rear axle, longitudinal L/R, UNIBALL } (adjustable shorter by 30mm from standard) fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Wheel suspension track control arm, rear HR7594

Rear axle track control arm L/R (top, rubber-metal reinforced bush) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 1.6-4.4 06.04-06.15

View part

HARDRACE Track control arm HR7595

Reinforced swingarm, quantity per set: 2, rear axle, rear/top L/R } (rubber-metal reinforced bush) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92) 1.6-3.0D 06.04-06.15

View part

HARDRACE Wheel suspension track control arm, rear HR7596

Rear axle track control arm L (rubber-metal reinforced bush) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 1.6-4.4 06.04-06.15

View part

HARDRACE Track control arm HR7597

Reinforced swingarm, quantity per set: 2, rear axle, bottom L/R } (strengthened sleeves) fits: BMW 1 (E82), 3 (E90), 3 (E92), 3 (E93) 3.0/4.0/4.4 03.07-10.13

View part

HARDRACE Engine bracket HR7598

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7599

Reinforced engine pad, fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Polyurethane suspension sleeve HR7600

Reinforced bushing, 2pcs, fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14

View part

HARDRACE Track control arm HR7601

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: AUDI A6 C5 1.8-4.2 01.97-01.05

View part

HARDRACE Polyurethane suspension sleeve HR7602

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR7603

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR7604

Reinforced bushing, 2pcs, fits: SUBARU IMPREZA, XV 1.6-2.0LPG 07.11-

View part

HARDRACE Engine bracket HR7605

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY V, XV 1.6-2.5CNG 01.08-

View part

HARDRACE Track control arm HR7606

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted)

View part

HARDRACE Stabilizer HR7607

Stabilizer, front, 25,4 mm fits: HONDA CR-V IV 1.6D/2.0 10.12-12.18

View part

HARDRACE Stabilizer HR7608

Stabilizer, rear, 22 mm fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

HARDRACE Engine bracket HR7609

Reinforced engine pad, fits: NISSAN SILVIA 2.0 09.99-12.03

View part

HARDRACE Track control arm HR7610

Reinforced swingarms set, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR7611

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: SUBARU FORESTER, IMPREZA, XV 1.6-2.0LPG 07.11-

View part

HARDRACE Track control arm HR7612

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: SUBARU FORESTER, IMPREZA, XV 1.6-2.0LPG 07.11-

View part

HARDRACE Screws and pins HR7614

Screws and pins, M12x1,5 length: 72 mm fits: SUBARU IMPREZA 08.92-06.09

View part

HARDRACE Engine bracket HR7615

Reinforced engine pad,

View part

HARDRACE Suspension ball joint HR7616

Reinforced suspension pin} fits: NISSAN CUBE 1.5D/1.6 08.09-

View part

HARDRACE Stabilizer HR7617

Stabilizer, rear, 22 mm (2WD vehicles) fits: MITSUBISHI OUTLANDER II 2.0/2.0D/2.2D 11.06-11.12

View part

HARDRACE Screws and pins HR7618

Screws and pins, M12x1,25 (20 pcs.) fits: SUBARU IMPREZA 08.92-06.09

View part

HARDRACE Screws and pins HR7619

Screws and pins, M12x1,5 length: 72 mm fits: HONDA CIVIC IV, CIVIC V, CIVIC VI 09.87-02.01

View part

HARDRACE Screws and pins HR7620

Screws and pins (20 pcs.) fits: MITSUBISHI LANCER VI, LANCER VII TOYOTA YARIS 09.95-

View part

HARDRACE Screws and pins HR7621

Screws and pins, M12x1,25 (20 pcs.) fits: SUBARU BRZ TOYOTA GT 86 03.12-

View part

HARDRACE Engine bracket HR7622

Reinforced engine pad,

View part

HARDRACE Track control arm HR7623

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR7624

Reinforced swingarm, quantity per set: 2, front axle, top L/R } (adjustable rubber-metal reinforced bush) fits: LEXUS GS, IS III 2.0-5.0 03.12-

View part

HARDRACE Engine bracket HR7625

Reinforced engine pad, fits: AUDI Q3 VW CC B7, PASSAT ALLTRACK B7, PASSAT B6, PASSAT B7, SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE, TIGUAN 1.4-3.6 03.05-11.22

View part

HARDRACE Engine bracket HR7626

Reinforced engine pad, fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14

View part

HARDRACE MacPherson strut mount HR7627

MacPherson strut mount L/R fits: VOLVO S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS II, FOCUS III MAZDA 3, 5 1.3-2.5 10.03-02.20

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account