Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Positioning rings HR7522

View part

HARDRACE Tie rod (with no end) HR7523

Reinforced steering rods,

View part

HARDRACE Engine bracket HR7524

Reinforced engine pad, fits: MAZDA 3, 5 2.0 12.08-

View part

HARDRACE Track control arm HR7525

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: BMW 5 (E60) 2.0-5.0 12.01-03.10

View part

HARDRACE Engine bracket HR7526

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7527

Reinforced engine pad,

View part

HARDRACE Track control arm HR7528

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted)

View part

HARDRACE Uniball HR7529

Uniball swingarm bushings} fits: NISSAN SKYLINE 2.0/2.5 07.93-07.00

View part

HARDRACE Track control arm HR7530

Reinforced swingarms set, quantity per set: 2, front, top L/R } fits: MITSUBISHI GALANT VIII 2.0-3.0 08.96-

View part

HARDRACE Track control arm HR7532

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: MITSUBISHI GALANT VIII 2.0/2.4/2.5 09.96-10.04

View part

HARDRACE Engine mount HR7533

Engine mount in the back fits: TOYOTA YARIS 1.0-1.8 01.05-12.12

View part

HARDRACE Engine bracket HR7534

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7535

Reinforced engine pad, fits: BMW 3 (E36), 3 (E46), Z3 (E36), Z4 (E85), Z4 (E86) 1.6-3.2 09.90-02.09

View part

HARDRACE Tie rod (with no end) HR7536

Reinforced steering rods,

View part

HARDRACE Track control arm HR7537

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MERCEDES C (CL203), C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204) 1.6-6.2 05.00-12.16

View part

HARDRACE Track control arm HR7538

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MERCEDES C T-MODEL (S204), C (W204), E (A207), E (C207) 1.6-6.2 01.07-12.16

View part

HARDRACE Engine bracket HR7539

Reinforced engine pad, fits: TOYOTA CAMRY 2.0-3.5 08.01-

View part

HARDRACE Track control arm HR7540

Reinforced swingarms set, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted) fits: TOYOTA ALTEZZA GITA, ARISTO 3.0 08.97-11.05

View part

HARDRACE Track control arm HR7541

Reinforced swingarms set, quantity per set: 2, rear axle L/R } (rubber-metal reinforced bush) fits: HONDA ACCORD IV, ACCORD V, ACCORD VI ROVER 600 I 1.8-2.3 01.90-03.03

View part

HARDRACE Suspension struts HR7542

Lower suspension bar fits: HONDA CIVIC V, CIVIC VI, CR-V I 1.4-2.0D 01.92-02.02

View part

HARDRACE Suspension struts HR7542-BLK

Suspension struts fits: HONDA CIVIC V, CIVIC VI 1.5/1.6 01.92-12.96

View part

HARDRACE Track control arm HR7544

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: VOLVO V40 FORD FOCUS II, FOCUS III, KUGA II 1.0-2.5 04.05-02.20

View part

HARDRACE Polyurethane suspension sleeve HR7545

Reinforced bushing, 2pcs, fits: NISSAN SILVIA 2.0 09.99-12.03

View part

HARDRACE Polyurethane suspension sleeve HR7546

Reinforced bushing, 2pcs, fits: NISSAN SILVIA 2.0 01.91-09.93

View part

HARDRACE Track control arm HR7549

Reinforced swingarm, quantity per set: 2, front axle, top L/R } (rubber-metal reinforced bush) fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Front wishbone assembly HR7550

Suspension track control arm set fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Track control arm HR7553

Reinforced swingarms set, quantity per set: 2, rear, top L/R } (rubber-metal reinforced bush) fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Track control arm HR7554

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (strengthened sleeves) fits: LOTUS EXIGE 1.8 05.00-06.12

View part

HARDRACE Track control arm HR7556

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: NISSAN CUBE 1.5D/1.6 08.09-

View part

HARDRACE Track control arm HR7557

Reinforced swingarms set, quantity per set: 6, front, bottom L/R } (strengthened sleeves)

View part

HARDRACE Track control arm HR7558

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (strengthened sleeves) fits: TOYOTA COROLLA, COROLLA VERSO 1.4-2.0D 01.01-03.08

View part

HARDRACE Track control arm HR7559

Reinforced swingarm, quantity per set: 2, rear axle, top L/R } (Only for use in Extreme Camber mode) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I 1.3-2.0D 09.87-02.02

View part

HARDRACE Front wishbone assembly HR7559-ED

Suspension track control arm set fits: HONDA CIVIC IV, CIVIC V, CIVIC VI 1.3-2.0D 09.87-03.01

View part

HARDRACE Track control arm HR7560

Reinforced swingarms set, quantity per set: 2, front L/R } (rubber-metal reinforced bush)

View part

HARDRACE Engine bracket HR7561

Reinforced engine pad, fits: BMW 3 (E46) 1.6-3.0D 12.97-12.07

View part

HARDRACE Engine bracket HR7562

Reinforced engine pad, fits: BMW 3 (E46) 3.2 07.00-08.06

View part

HARDRACE Engine bracket HR7563

Reinforced engine pad, fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 1.6-3.0D 12.97-02.09

View part

HARDRACE Engine bracket HR7564

Reinforced engine pad, fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 1.6-3.2 12.97-02.09

View part

HARDRACE Engine bracket HR7565

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7566

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7567

Reinforced engine pad, fits: HONDA CIVIC V, CIVIC VI 1.5/1.6/1.8 01.92-02.01

View part

HARDRACE Engine bracket HR7568

Reinforced engine pad, fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Engine bracket HR7569

Reinforced engine pad, fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Track control arm HR7570

Reinforced swingarms set, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush)

View part

HARDRACE Engine bracket HR7571

Reinforced engine pad, fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 1.6-3.0D 06.04-08.16

View part

HARDRACE Engine bracket HR7572

Reinforced engine pad, fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Tie rod (with no end) HR7573

Reinforced steering end, quantity per set: 2 pcs, L/R fits: HYUNDAI fits: HYUNDAI GENESIS 2.0/3.3/3.8 01.08-

View part

HARDRACE Stabilizer link HR7575

Reinforces stabilizer bar connector, L/R, quantity per set: 2

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account