Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Track control arm HR7443

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: HYUNDAI I30, IX35 KIA SPORTAGE III 1.4-2.0D 10.07-12.16

View part

HARDRACE Positioning rings HR7444

View part

HARDRACE Polyurethane suspension sleeve HR7449

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR7450

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR7451

Polyurethane stabilizer bushing (2pcs, front/stabilizer, L/R, inner diameter 21mm) fits: HONDA JAZZ II 03.02-10.08

View part

HARDRACE Polyurethane suspension sleeve HR7452

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR7454

Reinforced bushing, 2pcs,

View part

HARDRACE Stabilizer link HR7455

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: MITSUBISHI COLT V 1.3/1.6 05.96-09.03

View part

HARDRACE Engine bracket HR7457

Reinforced engine pad, fits: HYUNDAI ELANTRA V 1.6/1.6D/1.8 09.10-12.16

View part

HARDRACE Tie rod (with no end) HR7458

Reinforced steering rods, quantity per set: 2 pcs, L/R fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Track control arm HR7459

Reinforced swingarms set, quantity per set: 2, rear, bottom R } (rubber-metal reinforced bush) fits: LEXUS GS 5.0 09.15-

View part

HARDRACE Track control arm HR7460

Reinforced swingarms set, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted) fits: LEXUS GS 5.0 09.15-

View part

HARDRACE Track control arm HR7461

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: LEXUS GS 5.0 09.15-

View part

HARDRACE Engine bracket HR7463

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV 2.0-3.0 03.97-

View part

HARDRACE Suspension struts HR7467

Lower suspension bar fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Track control arm HR7469

Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted) fits: NISSAN SILVIA 2.0 01.91-09.93

View part

HARDRACE Track control arm HR7470

Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted) fits: NISSAN SILVIA 2.0 09.99-12.03

View part

HARDRACE Track control arm HR7480

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (adjusted) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 1.6-3.0D 06.04-08.16

View part

HARDRACE Uniball HR7481

Uniball swingarm bushings} fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 1.6-3.0D 06.04-08.16

View part

HARDRACE Polyurethane suspension sleeve HR7483

Reinforced bushing, 2pcs,

View part

HARDRACE Track control arm HR7484

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: HYUNDAI I30 1.4-2.0D 10.07-06.12

View part

HARDRACE Engine bracket HR7488

Reinforced engine pad,

View part

HARDRACE Uniball HR7492

Uniball swingarm bushings} fits: SUBARU FORESTER, IMPREZA, LEGACY V, LEGACY VI, OUTBACK, XV 1.6-3.6 01.08-

View part

HARDRACE Suspension ball joint HR7493

Reinforced suspension pin}

View part

HARDRACE Engine bracket HR7494

Reinforced engine pad,

View part

HARDRACE Track control arm HR7495

Reinforced swingarms set, quantity per set: 2, rear axle, bottom/front L/R } (rubber-metal reinforced bush) fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY V, LEGACY VI, OUTBACK, XV 1.5-3.6 09.07-

View part

HARDRACE Track control arm HR7498

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR7500

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MAZDA 3 1.6-2.3 12.08-09.14

View part

HARDRACE Engine bracket HR7502

Reinforced engine pad, fits: VOLVO V40 FORD FOCUS II, FOCUS III, KUGA II MAZDA 3 1.0-2.5 04.05-02.20

View part

HARDRACE Engine bracket HR7502-A

Reinforced engine pad, fits: VOLVO V40 FORD FOCUS II, FOCUS III, KUGA II MAZDA 3 1.0-2.5 04.05-02.20

View part

HARDRACE Polyurethane suspension sleeve HR7502-B

Polyurethane bushing, fits: VOLVO V40 FORD FOCUS II, FOCUS III, KUGA II MAZDA 3 1.0-2.5 04.05-02.20

View part

HARDRACE Track control arm HR7503

Reinforced swingarm, quantity per set: 2, rear axle L/R } (rubber-metal reinforced bush) fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Track control arm HR7504

Reinforced swingarm, quantity per set: 2, rear axle L/R } (rubber-metal reinforced bush) fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Track control arm HR7505

Reinforced swingarm, quantity per set: 2, rear axle L/R } (rubber-metal reinforced bush) fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Stabilizer link HR7506

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 (adjustable) fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Engine bracket HR7507

Reinforced engine pad, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Engine bracket HR7508

Reinforced engine pad, fits: MITSUBISHI LANCER VII 2.0 04.03-09.07

View part

HARDRACE Suspension struts HR7509

Lower suspension bar fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Uniball HR7510

Uniball swingarm bushings} fits: SUBARU FORESTER, IMPREZA, LEGACY IV, XV 1.6-3.0 09.03-

View part

HARDRACE Uniball HR7511

Uniball swingarm bushings} fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV, LEGACY V, XV 1.6-3.0 10.98-

View part

HARDRACE Suspension struts HR7514

Body torsion bar (fender reinforcement) fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Engine bracket HR7515

Reinforced engine pad,

View part

HARDRACE Stabilizer link HR7516

Reinforces stabilizer bar connector, L/R, quantity per set: 2

View part

HARDRACE Engine bracket HR7517

Reinforced engine pad,

View part

HARDRACE Stabilizer HR7518

Stabilizer, front, 25,4 mm fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Stabilizer HR7518K

Stabilizer, front, 25,4 mm (with connectors) fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Stabilizer HR7519

Stabilizer, rear, 19 mm fits: SUBARU BRZ TOYOTA GT 86 2.0 03.12-

View part

HARDRACE Engine bracket HR7521

Reinforced engine pad,

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account