Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Other elements of suspension system HR6275

Other elements of suspension system rear fits: NISSAN 200SX, 240SX, 300ZX, SILVIA, SKYLINE 1.8-3.0 07.88-

View part

HARDRACE Track control arm HR6276

Reinforced swingarms set, quantity per set: 1, rear, UNIBALL } (adjusted) fits: NISSAN 300ZX, SILVIA, SKYLINE 2.0/2.5/3.0 03.89-12.03

View part

HARDRACE Track control arm HR6285

Reinforced swingarm, quantity per set: 2, rear axle, front/top L/R } fits: HONDA ACCORD VI, ACCORD VII 1.6-3.0 03.97-03.08

View part

HARDRACE Polyurethane suspension sleeve HR6286

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR6287

Reinforced bushing, 2pcs,

View part

HARDRACE Stabilizer link HR6289

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: HONDA ACCORD V, ACCORD VI 1.6-3.0 02.96-06.03

View part

HARDRACE Stabilizer link HR6290

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: HONDA ACCORD VI, ACCORD VII 1.6-3.0 03.97-05.08

View part

HARDRACE Engine bracket HR6291

Reinforced engine pad, fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Track control arm HR6293

Reinforced swingarms set, quantity per set: 2, front, bottom L/R, UNIBALL } (adjusted) fits: MITSUBISHI GALANT VIII 2.0/2.4/2.5 09.96-10.04

View part

HARDRACE Track control arm HR6294

Reinforced swingarms set, quantity per set: 4, rear L/R } (rubber-metal reinforced bush) fits: NISSAN MICRA II 1.0/1.3/1.4 08.92-02.03

View part

HARDRACE Engine bracket HR6295

Reinforced engine pad, fits: MAZDA 323 F VI, 323 S VI, PREMACY 1.6-2.0D 09.98-03.05

View part

HARDRACE Engine bracket HR6296

Reinforced engine pad, fits: MAZDA 323 F VI, 323 S VI, PREMACY 1.8-2.0D 05.98-03.05

View part

HARDRACE Polyurethane suspension sleeve HR6297

Reinforced bushing, 2pcs, fits: HONDA CIVIC VI 1.5 11.95-12.96

View part

HARDRACE Engine bracket HR6299

Reinforced engine pad, fits: MITSUBISHI LANCER VII, OUTLANDER II, OUTLANDER III 1.6-2.4ALK 06.00-12.22

View part

HARDRACE Polyurethane suspension sleeve HR6299-A

Polyurethane bushing, fits: MITSUBISHI ECLIPSE CROSS, LANCER VII 1.5-2.4H 06.00-

View part

HARDRACE Track control arm HR6301

Reinforced swingarms set, quantity per set: 6, rear, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6301-A

Reinforced swingarms set, quantity per set: 2 }

View part

HARDRACE Track control arm HR6302

Reinforced swingarm, quantity per set: 2 }

View part

HARDRACE Track control arm HR6303

Reinforced swingarms set, quantity per set: 6, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6303-A

Reinforced swingarms set, quantity per set: 4, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6304

Reinforced swingarms set, quantity per set: 6, rear L/R } (adjustable rubber-metal reinforced bush) fits: TOYOTA CELICA, COROLLA 1.3-2.2 05.92-

View part

HARDRACE Track control arm HR6304-R

Reinforced swingarms set, quantity per set: 6, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6304-TA

Reinforced swingarms set, quantity per set: 2 }

View part

HARDRACE Engine bracket HR6305

Reinforced engine pad, fits: VOLVO C70 II, V40 FORD FOCUS I, FOCUS II, FOCUS III MAZDA 3, 5, CX-7 1.0-2.5 10.98-

View part

HARDRACE Engine bracket HR6306

Reinforced engine pad, fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Engine bracket HR6310

Reinforced engine pad,

View part

HARDRACE Tie rod (with no end) HR6311

Steering gear mounting sleeve kit, quantity per set: 5 pcs, L/R fits: HONDA fits: HONDA CIVIC VI, CR-V I 1.4-2.0D 09.94-02.02

View part

HARDRACE Tie rod (with no end) HR6312

Steering gear mounting sleeve kit, quantity per set: 3 pcs, L/R fits: MITSUBISHI fits: MITSUBISHI LANCER VII 2.0 01.01-09.07

View part

HARDRACE Uniball HR6313

Uniball swingarm bushings} fits: SUBARU LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-12.99

View part

HARDRACE Tie rod (with no end) HR6314

Reinforced steering end, quantity per set: 2 pcs, L/R fits: MAZDA fits: MAZDA RX-7 III 1.3 07.92-08.02

View part

HARDRACE Stabilizer link HR6315

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 4 (adjustable with supports, length: 77-87mm) fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Track control arm HR6316

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: MAZDA RX-7 III 1.3 07.92-08.02

View part

HARDRACE Track control arm HR6317

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: MAZDA RX-7 III 1.3 07.92-08.02

View part

HARDRACE Track control arm HR6319-S

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: VOLVO C70 II, V40 FORD FOCUS I, FOCUS II, FOCUS III, KUGA II MAZDA 3, 5 1.0-2.5 10.98-

View part

HARDRACE Stabilizer link HR6321

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: BYD SEAL U, SONG PLUS LEXUS ES, RX TOYOTA CAMRY, HIGHLANDER / KLUGER, PREVIA II, SOLARA 1.5H-Electric 02.00-

View part

HARDRACE Stabilizer link HR6322

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: LEXUS ES, RX TOYOTA AVALON, CAMRY, HARRIER, HIGHLANDER / KLUGER, VENZA 2.0-3.5 06.00-

View part

HARDRACE Stabilizer link HR6323

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 (length: 160mm) fits: MAZDA 323 F VI, 323 S VI, 5, PREMACY 1.3-2.0D 05.98-05.10

View part

HARDRACE Engine bracket HR6324

Reinforced engine pad, fits: MITSUBISHI COLT V 1.3/1.6 05.96-09.03

View part

HARDRACE Uniball HR6324F

Uniball swingarm bushings}

View part

HARDRACE Positioning rings HR6325

Gearshift lever repair kit (strengthened) fits: HONDA CIVIC V, CIVIC VI 1.4/1.5/1.6 08.93-02.01

View part

HARDRACE Polyurethane suspension sleeve HR6325-BLK

Polyurethane bushing, fits: HONDA CIVIC IV, CIVIC V, CIVIC VI 1.3-1.6 09.87-03.01

View part

HARDRACE Positioning rings HR6325-R

View part

HARDRACE Polyurethane suspension sleeve HR6326

Reinforced bushing, 2pcs, fits: HONDA CIVIC V, CIVIC VI 1.5/1.6 01.92-12.96

View part

HARDRACE Stabilizer bar bushing HR6326-BLK

View part

HARDRACE Track control arm HR6327

Reinforced swingarms set, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Track control arm HR6328

Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted) fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Track control arm HR6329

Reinforced swingarm, quantity per set: 2, front axle, top L/R } (adjustable no silentblock) fits: HONDA CIVIC V, CIVIC VI, CRX III 1.3-2.0D 10.91-03.01

View part

HARDRACE Track control arm HR6329-ED

Reinforced swingarm, quantity per set: 2 } fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account