Partios Wholesale catalogue
Hardrace Distributor | Suspension & Steering
Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)
3,272 current catalogue lines
About the HARDRACE range
Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.
Catalogue products
Vehicle references are indicative — confirm against the article number.
HARDRACE Polyurethane suspension sleeve HR6330
Reinforced bushing (2pcs, control rod/front axle, L/R) NISSAN 200SX, 240SX, 300ZX, SILVIA, SKYLINE 07.88-
View partHARDRACE Track control arm HR6334
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (manual regulation)
View partHARDRACE Track control arm HR6335
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (manual regulation) fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09
View partHARDRACE Stabilizer HR6336
Stabilizer, rear (strengthened sleeves)
View partHARDRACE Stabilizer HR6337
Stabilizer, rear (standard sleeves)
View partHARDRACE Stabilizer link HR6338
Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: NISSAN MAXIMA / MAXIMA QX IV 2.0/2.5/3.0 01.95-12.00
View partHARDRACE Stabilizer link HR6339
Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: MAZDA 323 F VI, 323 S VI, PREMACY 1.3-2.0D 05.98-03.05
View partHARDRACE Uniball HR6341
Uniball swingarm bushings}
View partHARDRACE Track control arm HR6342
Reinforced swingarm, quantity per set: 2, rear axle, top L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC VII, CR-V II, INTEGRA 1.3H-2.2D 11.00-
View partHARDRACE Polyurethane suspension sleeve HR6343
Reinforced bushing, 2pcs,
View partHARDRACE Engine bracket HR6344
Reinforced engine pad, fits: MITSUBISHI COLT V 1.3/1.6 05.96-09.03
View partHARDRACE Polyurethane suspension sleeve HR6346
Reinforced bushing, 2pcs,
View partHARDRACE Positioning rings HR6347
Gearshift lever repair kit (strengthened) fits: HONDA CIVIC V, CIVIC VI, CR-V I, INTEGRA 1.3-2.0 10.91-02.02
View partHARDRACE Polyurethane suspension sleeve HR6347-BLACK
Polyurethane bushing, fits: HONDA CIVIC III, CIVIC IV, CIVIC V, CIVIC VI 1.5/1.6/1.8 01.84-03.01
View partHARDRACE Tie rod (with no end) HR6348
Steering gear mounting sleeve kit, quantity per set: 3 pcs, L/R fits: MAZDA fits: MAZDA 323 F VI, 323 S VI, PREMACY 1.3-2.0D 09.98-03.05
View partHARDRACE Positioning rings HR6349-A
View partHARDRACE Track control arm HR6350
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted)
View partHARDRACE Track control arm HR6351
Reinforced swingarms set, quantity per set: 2, front, bottom L/R, UNIBALL } (adjusted) fits: HONDA CIVIC VI 1.6 11.98-03.01
View partHARDRACE Uniball HR6352
Uniball swingarm bushings} fits: MITSUBISHI COLT V, LANCER V 1.3/1.6/2.0 01.94-09.03
View partHARDRACE Stabilizer link HR6353
Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: MITSUBISHI ECLIPSE CROSS, OUTLANDER II, OUTLANDER III 1.5-2.4H 11.06-
View partHARDRACE Polyurethane suspension sleeve HR6355
Reinforced bushing, 2pcs, fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01
View partHARDRACE Stabilizer bar bushing HR6355-BLK
View partHARDRACE Polyurethane suspension sleeve HR6356
Reinforced bushing, 2pcs,
View partHARDRACE Tie rod (with no end) HR6357
Steering gear mounting sleeve kit, quantity per set: 2 pcs, L/R fits: NISSAN fits: NISSAN PRIMERA 1.6/2.0/2.0D 06.90-06.96
View partHARDRACE Uniball HR6358
Uniball swingarm bushings, quantity per set: 2 pcs, front axle, L/R, lower swingarm} fits: HONDA CIVIC V, CIVIC VI, CR-V I 1.4-2.0 08.93-02.02
View partHARDRACE Polyurethane suspension sleeve HR6359
Polyurethane shock absorber bushing (4pcs, Rear shock absorber, L/R) fits: HONDA ACCORD III, ACCORD IV, ACCORD V, ACCORD VI, ACCORD VII, ACCORD VIII, CIVIC IV, CIVIC V, CIVIC VI 11.83-06.15
View partHARDRACE Track control arm HR6360
Reinforced swingarms set, quantity per set: 4, rear L/R, UNIBALL } (adjusted)
View partHARDRACE Track control arm HR6361
Reinforced swingarms set, quantity per set: 4, rear L/R } (rubber-metal reinforced bush)
View partHARDRACE Track control arm HR6361-L
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)
View partHARDRACE Track control arm HR6361-S
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)
View partHARDRACE Engine bracket HR6362
Reinforced engine pad, fits: HONDA ACCORD VI 2.0/2.0D/3.0 02.98-06.03
View partHARDRACE Engine bracket HR6363
Reinforced engine pad,
View partHARDRACE Uniball HR6363F
Uniball swingarm bushings}
View partHARDRACE Stabilizer link HR6364
Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: HONDA ACCORD IV, ACCORD V ROVER 600 I 1.8-2.3 01.90-06.99
View partHARDRACE Engine bracket HR6366
Reinforced engine pad,
View partHARDRACE Uniball HR6366F
Uniball swingarm bushings}
View partHARDRACE Engine bracket HR6367
Reinforced engine pad, fits: HONDA ACCORD VI 2.0/3.0 02.98-06.03
View partHARDRACE Uniball HR6367F
Uniball swingarm bushings} fits: HONDA ACCORD VI 2.0/3.0 02.98-06.03
View partHARDRACE Engine bracket HR6368
Reinforced engine pad,
View partHARDRACE Polyurethane suspension sleeve HR6369
Reinforced bushing (2pcs, rear axle) HONDA ACCORD IV, ACCORD V, CIVIC II, CIVIC IV, CIVIC VI, CONCERTO 09.87-02.01
View partHARDRACE Uniball HR6369F
Uniball swingarm bushings}
View partHARDRACE Engine bracket HR6370
Reinforced engine pad,
View partHARDRACE Engine bracket HR6371
Reinforced engine pad,
View partHARDRACE Track control arm HR6374-H
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (manual regulation) fits: TOYOTA ARISTO 3.0 08.97-09.04
View partHARDRACE Track control arm HR6374-R
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: TOYOTA ALTEZZA GITA, ARISTO 3.0 08.97-11.05
View partHARDRACE Track control arm HR6375
Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI 1.3-1.6 09.87-12.96
View partHARDRACE Track control arm HR6379
Reinforced swingarm, quantity per set: 2, rear axle, top L/R } (rubber-metal reinforced bush) fits: HONDA ACCORD VII, CR-V III 2.0-3.0 09.02-06.12
View partHARDRACE Engine bracket HR6382
Reinforced engine pad,
View partBuying with Partios
Buying HARDRACE parts through Partios
Are these genuine HARDRACE parts?
- Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source HARDRACE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.
Do you supply HARDRACE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on HARDRACE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a HARDRACE order?
- It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for HARDRACE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account