Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Track control arm HR6112-ED

Reinforced swingarms set, quantity per set: 2, rear axle, top L/R } (adjustable) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA 1.3-2.0D 09.87-02.02

View part

HARDRACE Track control arm HR6113

Reinforced swingarm, quantity per set: 2, rear axle, top L/R, UNIBALL } (adjustable) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CR-V II, CRX III, INTEGRA 1.3-2.4 09.87-03.07

View part

HARDRACE Rear wishbone silent block HR6115

Rear track control arm silent block L/R (top rear) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III ROVER 200, 200 II 1.2-2.0D 09.87-02.02

View part

HARDRACE Track control arm HR6116-BK

Reinforced swingarm, quantity per set: 2, rear axle, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC VI 1.4/1.5/1.6 11.95-03.01

View part

HARDRACE Track control arm HR6118

Reinforced swingarm, quantity per set: 2, front axle, top L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA 1.3-2.0D 10.91-10.01

View part

HARDRACE Track control arm HR6119

Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted) fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01

View part

HARDRACE Polyurethane suspension sleeve HR6120

Reinforced suspension bushings, 2pcs, front rear swingarm, L/R, fits: HONDA CIVIC V, CIVIC VI, CR-V I, CRX III ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05

View part

HARDRACE Engine bracket HR6121

Reinforced engine pad, fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Engine bracket HR6122

Reinforced engine pad, fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Polyurethane suspension sleeve HR6127

Reinforced suspension bushings, 26pcs, front/rear, L/R, no stabilizer bar bushing fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Track control arm HR6128

Reinforced swingarm, quantity per set: 2, front axle, top L/R } (rubber-metal reinforced bush) fits: HONDA ACCORD IV, ACCORD V, ACCORD VI, ACCORD VII, ACCORD VIII, CIVIC IV 1.3-3.5 01.88-06.15

View part

HARDRACE Track control arm HR6129

Reinforced swingarms set, quantity per set: 2, front, bottom L/R, UNIBALL } (adjusted) fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Track control arm HR6130

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01

View part

HARDRACE Track control arm HR6130-S

Reinforced swingarm, quantity per set: 2, front, bottom/front L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC V, CIVIC VI, CR-V I 1.3-2.0D 10.91-02.02

View part

HARDRACE Track control arm HR6131

Reinforced swingarms set, quantity per set: 2, front/front axle, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC VI 1.6/1.8 11.95-03.01

View part

HARDRACE Track control arm HR6131-S

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Uniball HR6132

Uniball swingarm bushings, quantity per set: 4 pcs, rear axle, L/R, top/transverse swingarm} fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA 1.3-2.0D 09.87-02.02

View part

HARDRACE Uniball HR6133

View part

HARDRACE Uniball HR6133-EG

Uniball swingarm bushings, quantity per set: 6 pcs, rear axle, L/R, lower swingarm} fits: HONDA CIVIC V, CIVIC VI 1.3/1.5/1.6 10.91-12.96

View part

HARDRACE Uniball HR6134

Uniball swingarm bushings, quantity per set: 4 pcs, front axle, L/R, top} fits: HONDA CIVIC V, CIVIC VI, CR-V I 1.4-2.0 08.93-12.01

View part

HARDRACE Front track control arm silent block HR6135

Front track control arm silent block L/R fits: HONDA CIVIC V, CIVIC VI, CR-V I, PRELUDE V 1.3-2.2 10.91-02.02

View part

HARDRACE Stabilizer link HR6136

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: HONDA ACCORD III, CIVIC III, CIVIC IV, CIVIC V, CIVIC VI, CIVIC VII, CRX II, CRX III, INTEGRA 1.2-2.0D 01.84-12.05

View part

HARDRACE Stabilizer link HR6136-BLK

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: HONDA CIVIC III, CIVIC IV, CIVIC V, CIVIC VI, CRX I 1.3-2.0D 10.83-03.01

View part

HARDRACE Stabilizer link HR6137

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: HONDA CIVIC VI, INTEGRA 1.4-2.0D 07.93-11.01

View part

HARDRACE Stabilizer link HR6141

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY III, LEGACY OUTBACK 1.5-3.0 01.89-10.12

View part

HARDRACE Stabilizer link HR6142

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY OUTBACK 1.6-2.5 08.92-10.12

View part

HARDRACE Engine bracket HR6143

Reinforced engine pad, fits: SUBARU LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-12.99

View part

HARDRACE Engine bracket HR6144

Reinforced engine pad, fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-09.02

View part

HARDRACE Polyurethane suspension sleeve HR6145

Reinforced suspension bushings (10pcs, rear axle, L/R) fits: SUBARU IMPREZA 08.92-06.09

View part

HARDRACE Engine bracket HR6147

Reinforced engine pad, fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Engine bracket HR6148

Reinforced engine pad,

View part

HARDRACE Uniball HR6149

Uniball swingarm bushings} fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Polyurethane suspension sleeve HR6151

Polyurethane stabilizer bushing (2pcs, front axle/rear axle/stabilizer, L/R, inside, inner diameter 18mm) fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY III, LEGACY OUTBACK 05.89-06.09

View part

HARDRACE Tie rod (with no end) HR6152

Steering gear mounting sleeve kit, quantity per set: 2 pcs, L/R fits: SUBARU fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY IV 2.0-3.0 02.94-03.12

View part

HARDRACE Track control arm HR6153

Reinforced swingarms set, quantity per set: 10, rear L/R, UNIBALL } (adjusted) fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Track control arm HR6153-TA

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Track control arm HR6154

Reinforced swingarms set, quantity per set: 10, rear axle L/R, UNIBALL } (no regulation) fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY OUTBACK 1.6-2.5 08.92-09.02

View part

HARDRACE Track control arm HR6154-A

Reinforced swingarms set, quantity per set: 8, rear L/R, UNIBALL } (adjusted) fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-09.02

View part

HARDRACE Track control arm HR6155

Reinforced swingarms set, quantity per set: 10, rear axle L/R, UNIBALL } (adjustable rubber-metal reinforced bush) fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY OUTBACK 1.5-2.5 08.92-06.09

View part

HARDRACE Track control arm HR6155-A

Reinforced swingarms set, quantity per set: 8, rear axle L/R } (adjustable, reinforced metal-rubber bushings) fits: SUBARU FORESTER 2.0/2.5 03.97-05.08

View part

HARDRACE Track control arm HR6155-RF

Reinforced swingarms set, quantity per set: 2, rear, top L/R } (adjusted) fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY OUTBACK 1.5-2.5 08.92-06.09

View part

HARDRACE Track control arm HR6155-RR

Reinforced swingarms set, quantity per set: 6, rear, bottom L/R, UNIBALL } (adjusted) fits: SUBARU FORESTER, LEGACY II, LEGACY III, LEGACY IV, LEGACY OUTBACK 2.0-3.0 02.94-10.12

View part

HARDRACE Track control arm HR6155-TA

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Engine bracket HR6156

Reinforced engine pad, fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Uniball HR6157

UNIBALL steering knuckle bushings, quantity per set: 2 pcs, rear axle, L/R, knuckle} fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY III, LEGACY OUTBACK 1.5-2.5 01.89-10.12

View part

HARDRACE Track control arm HR6158

Reinforced swingarms set, quantity per set: 8, rear axle L/R } (strengthened sleeves with connectors) fits: SUBARU IMPREZA, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-06.09

View part

HARDRACE Track control arm HR6159

Reinforced swingarms set, quantity per set: 8, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6159-A

Reinforced swingarms set, quantity per set: 8, rear L/R } (rubber-metal reinforced bush) fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-09.02

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account