Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Track control arm HR6161

Reinforced swingarms set, quantity per set: 2, front, top L/R } (rubber-metal reinforced bush) fits: NISSAN PRIMERA 1.6/2.0/2.0D 06.90-03.98

View part

HARDRACE Stabilizer link HR6162

Reinforces stabilizer bar connector, L/R, quantity per set: 2

View part

HARDRACE Stabilizer link HR6163

Reinforces stabilizer bar connector, L/R, quantity per set: 2

View part

HARDRACE Track control arm HR6164-S13-R

Reinforced swingarms set, quantity per set: 2 } fits: NISSAN 300ZX, SKYLINE 2.0/2.5/3.0 03.89-09.95

View part

HARDRACE Track control arm HR6164-S14-R

Reinforced swingarms set, quantity per set: 2 L/R } (rubber-metal reinforced bush) fits: NISSAN SILVIA, SKYLINE 2.0/2.5 07.93-12.03

View part

HARDRACE Track control arm HR6165-S13-R

Reinforced swingarms set, quantity per set: 2 } fits: NISSAN 300ZX, SKYLINE 2.0/2.5/3.0 03.89-09.95

View part

HARDRACE Track control arm HR6165-S14-R

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: NISSAN SILVIA 2.0 09.99-12.03

View part

HARDRACE Track control arm HR6166-R

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: NISSAN 240SX, 300ZX, SILVIA, SKYLINE 2.0-3.0 07.88-

View part

HARDRACE Track control arm HR6167-R

Reinforced swingarms set, quantity per set: 2, rear, top L/R } (rubber-metal reinforced bush) fits: NISSAN SILVIA, SKYLINE 2.0/2.5 07.93-12.03

View part

HARDRACE Stabilizer link HR6169

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: NISSAN SENTRA V 1.8/2.0/2.5 01.00-12.06

View part

HARDRACE Track control arm HR6172

Reinforced swingarms set, quantity per set: 4, rear L/R } (rubber-metal reinforced bush) fits: NISSAN PRIMERA 1.6/2.0/2.0D 06.90-03.98

View part

HARDRACE Track control arm HR6173

Reinforced swingarms set, quantity per set: 4, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Stabilizer link HR6174

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 fits: NISSAN ALMERA II, PATROL GR IV, PRIMERA 1.5-2.8D 01.86-

View part

HARDRACE Stabilizer link HR6175

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: NISSAN 180SX, 200SX, SILVIA, SKYLINE 1.8/2.0/2.5 07.88-12.03

View part

HARDRACE Stabilizer link HR6176

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: INFINITI Q45 II NISSAN 200SX, 240SX, 300ZX, SILVIA, SKYLINE 1.8-4.1 07.88-

View part

HARDRACE Track control arm HR6177-R

Reinforced swingarms set, quantity per set: 2, rear, top L/R } (rubber-metal reinforced bush) fits: NISSAN 240SX, 300ZX, SKYLINE 2.0-3.0 07.88-

View part

HARDRACE Track control arm HR6179

Reinforced swingarms set, quantity per set: 6, rear L/R } (rubber-metal reinforced bush) fits: NISSAN PRIMERA 1.6/2.0/2.0D 06.90-03.98

View part

HARDRACE Engine bracket HR6182

Reinforced engine pad, fits: MITSUBISHI COLT V, LANCER V 1.3/1.6/2.0 01.94-09.03

View part

HARDRACE Engine bracket HR6183

Reinforced engine pad, fits: MITSUBISHI GALANT VII 1.8-2.5 11.92-08.96

View part

HARDRACE Stabilizer link HR6184

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: MITSUBISHI COLT V 1.3/1.6 05.96-09.03

View part

HARDRACE Track control arm HR6185

Reinforced swingarm, quantity per set: 2, rear axle, bottom L/R } (rubber-metal reinforced bush) fits: MITSUBISHI COLT V, LANCER V 1.3/1.6/2.0 01.94-09.03

View part

HARDRACE Track control arm HR6186

Reinforced swingarm, quantity per set: 2, rear axle L/R } (rubber-metal reinforced bush) fits: MITSUBISHI CARISMA, COLT IV, COLT V, LANCER V 1.3-2.0 04.92-06.06

View part

HARDRACE Polyurethane suspension sleeve HR6187

Polyurethane stabilizer bushing (2pcs, front axle/stabilizer, L/R, inside, inner diameter 18mm) fits: MITSUBISHI ECLIPSE II, ECLIPSE III, GALANT VIII 12.95-

View part

HARDRACE Track control arm HR6188

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: MITSUBISHI COLT V, LANCER V 1.3/1.6/2.0 01.94-09.03

View part

HARDRACE Track control arm HR6189

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: MITSUBISHI COLT V, LANCER V 1.3/1.6/2.0 01.94-09.03

View part

HARDRACE Polyurethane suspension sleeve HR6190

Polyurethane stabilizer bushing (2pcs, rear axle/stabilizer, inside, inner diameter 19mm) fits: MITSUBISHI ECLIPSE II, ECLIPSE III, GALANT VIII 12.95-

View part

HARDRACE Track control arm HR6191

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MITSUBISHI GALANT VIII 2.0/2.4/2.5 09.96-10.04

View part

HARDRACE Tie rod (with no end) HR6198

Steering gear mounting sleeve kit, quantity per set: 3 pcs, L/R fits: NISSAN fits: NISSAN 240SX, 300ZX 2.4/3.0 07.88-

View part

HARDRACE Tie rod (with no end) HR6199

Steering gear mounting sleeve kit, quantity per set: 3 pcs, L/R fits: NISSAN fits: NISSAN 200SX, SILVIA 2.0 10.93-12.03

View part

HARDRACE Tie rod (with no end) HR6201

Steering gear mounting sleeve kit, quantity per set: 2 pcs, L/R fits: MITSUBISHI fits: MITSUBISHI LANCER IV, LANCER V, LANCER VI 1.3-2.0D 06.92-

View part

HARDRACE Track control arm HR6203

Reinforced swingarm, quantity per set: 2, front axle, top L/R, UNIBALL } (adjustable) fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA 1.3-2.0D 10.91-10.01

View part

HARDRACE Suspension ball joint HR6203-BJ

Reinforced suspension pin, quantity per set: 1 pcs, front/top, L/R} fits: HONDA CIVIC V, CIVIC VI 1.4-2.0D 01.92-03.01

View part

HARDRACE Track control arm HR6203-ED

Reinforced swingarms set, quantity per set: 2, front axle/top L/R } (adjustable rubber-metal reinforced bush) fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA 1.3-2.0D 10.91-10.01

View part

HARDRACE Track control arm HR6204

Reinforced swingarm, quantity per set: 2, front, top L/R, UNIBALL } (adjustable) fits: HONDA CIVIC VI 1.4-2.0D 09.94-03.01

View part

HARDRACE Front wishbone assembly HR6204-ED

Suspension track control arm set fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Track control arm HR6205

Reinforced swingarms set, quantity per set: 2, front, bottom L/R, UNIBALL } (adjusted) fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01

View part

HARDRACE Track control arm HR6206

Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted) fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Engine bracket HR6207

Reinforced engine pad, fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Engine bracket HR6208

Reinforced engine pad, fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Engine bracket HR6209

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6210

Reinforced engine pad, fits: MITSUBISHI LANCER VII 1.6 06.00-12.13

View part

HARDRACE Stabilizer link HR6211

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: NISSAN PRIMERA 1.6/2.0/2.0D 06.90-03.98

View part

HARDRACE Engine bracket HR6214

Reinforced engine pad, fits: NISSAN PRIMERA 1.6-2.0LPG 06.96-

View part

HARDRACE Engine bracket HR6215

Reinforced engine pad, fits: NISSAN PRIMERA 1.6-2.0LPG 06.96-

View part

HARDRACE Stabilizer link HR6217

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 (length: 55mm) fits: HONDA CIVIC V, CIVIC VI, CIVIC VII, CR-V I, CRX III SUBARU FORESTER, LEGACY II 1.4-2.5 03.92-10.12

View part

HARDRACE Stabilizer link HR6218

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 (length: 90mm) fits: HONDA CIVIC VI 1.4-2.0D 09.94-03.01

View part

HARDRACE Tie rod (with no end) HR6219

Reinforced steering rods, quantity per set: 2 pcs, L/R fits: NISSAN fits: NISSAN 200SX, 240SX, SILVIA 2.0/2.4 07.88-

View part

HARDRACE Tie rod (with no end) HR6221

Reinforced steering rods, quantity per set: 2 pcs, L/R fits: NISSAN fits: NISSAN 200SX, ALMERA I 2.0/2.0D 10.93-07.00

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account