Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Exhaust fumes pressure sensor 821 896

Exhaust fumes pressure sensor (number of pins: 3) fits: FIAT FULLBACK HYUNDAI ACCENT IV, ELANTRA V, H-1 CARGO, H-1 TRAVEL, H100, I20 I, I30, I40 I, I40 I CW, IX20, IX35, IX55 1.1D-3.0D 01.05-

View part

HANS PRIES Wheel hub 821 900

Wheel hub front fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, CERATO II, PRO CEE'D 1.4-2.0LPG 11.05-02.14

View part

HANS PRIES ABS sensor 821 903

ABS sensor rear L fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-

View part

HANS PRIES ABS sensor 821 904

ABS sensor rear R fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-

View part

HANS PRIES Shock absorber dust cover 821 907

Shock absorber dust cover, front fits: HYUNDAI I30 KIA CEE'D, CERATO III, PRO CEE'D 1.0-2.0 11.11-

View part

HANS PRIES Front ball joint 821 909

Axle ball joint L/R (bottom front) (with extra materials) fits: HYUNDAI GRAND SANTA FÉ, GRANDEUR, I30, SANTA FÉ III, SONATA VI KIA CARENS IV, CEE'D, OPTIMA, PRO CEE'D 1.0-Electric 06.09-

View part

HANS PRIES Tie rod (with no end) 821 917

Tie rod (with no end) L/R (length: 242mm) fits: HYUNDAI I20 I, I20 II 1.1D-1.6D 08.08-08.20

View part

HANS PRIES Stabilizer link 821 918

Stabilizer link front R 216mm fits: HYUNDAI I20 I, IX20 KIA PICANTO II, VENGA 1.0-1.6LPG 08.08-

View part

HANS PRIES Stabilizer link 821 919

Stabilizer link front L 216mm fits: HYUNDAI I20 I, IX20 KIA PICANTO II, VENGA 1.0-1.6LPG 08.08-

View part

HANS PRIES Tie rod (with no end) 821 922

Tie rod (with no end) L/R (length: 359mm) fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

HANS PRIES Tie rod end 821 927

Tie rod end L fits: HYUNDAI I40 I, I40 I CW, IX35, SONATA VI KIA CARENS IV, CARNIVAL IV, OPTIMA, SPORTAGE III 1.6-Electric 06.09-

View part

HANS PRIES Tie rod end 821 928

Tie rod end R fits: HYUNDAI I40 I, I40 I CW, IX35, SONATA VI KIA CARENS IV, CARNIVAL IV, OPTIMA, SPORTAGE III 1.6-Electric 06.09-

View part

HANS PRIES Stabilizer link 821 929

Stabilizer link rear L/R fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.4 08.09-12.16

View part

HANS PRIES Stabilizer link 821 930

Stabilizer link front L/R fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, NIRO, NIRO I, PROCEED, SOUL III, SOUL III CARGO, XCEED D4FB-G4NH 10.15-

View part

HANS PRIES Brake disc 821 936

Brake disc front L/R fits: HYUNDAI ELANTRA VI, I30, IX35, KONA, SONATA VII, TUCSON KIA CEED, CERATO IV, NIRO I, OPTIMA, PROCEED, SELTOS, SOUL II, SOUL III, SOUL III CARGO 1.0-Electric 11.13-

View part

HANS PRIES MacPherson strut mount 821 943

MacPherson strut mount front L/R fits: HYUNDAI GRANDEUR, I40 I, I40 I CW, IX35, SONATA VI KIA OPTIMA, SPORTAGE III 1.6-3.0 06.09-05.19

View part

HANS PRIES MacPherson strut mount 821 944

MacPherson strut mount front L/R fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-12.13

View part

HANS PRIES Gearbox hydraulic filter 821 945

Gearbox hydraulic filter fits: HYUNDAI SANTA FE IV KIA SPORTAGE IV 2.0D-3.5 02.18-09.22

View part

HANS PRIES Air blower regulation element 821 946

Air blower regulation element (resistor) fits: HYUNDAI GRAND SANTA FÉ, I10 II, I20 I, SANTA FÉ III KIA SOUL I, SOUL II 1.0-3.3 08.08-12.19

View part

HANS PRIES Fuel pressure sensor 821 947

Fuel pressure sensor fits: HYUNDAI IX35, IX55, SANTA FÉ II, SANTA FÉ III KIA CARNIVAL III, SORENTO II, SPORTAGE III 2.0D/2.2D/3.0D 03.06-08.18

View part

HANS PRIES CR system elements 821 948

Fuel pressure sensor fits: HYUNDAI I20 I, I30, IX20 KIA CEE'D, PRO CEE'D, RIO III, VENGA 1.4D 08.08-07.19

View part

HANS PRIES Fuel feed system one-way valve 821 949

Fuel feed system one-way valve fits: HYUNDAI ACCENT III, ELANTRA IV KIA RIO II 1.4/1.6/2.0 03.05-12.11

View part

HANS PRIES Exhaust fumes temperature sensor 821 950

Exhaust gas temperature sensor (exhaust manifold) fits: HYUNDAI ACCENT IV, ELANTRA V, I20 I, I30, IX20 KIA CARENS III, CEE'D, CERATO I, PRO CEE'D, RIO III, SOUL I, SOUL II, VENGA 1.4D/1.6D 06.05-

View part

HANS PRIES Air blower regulation element 821 951

Air blower regulation element (resistor) fits: HYUNDAI I10 I KIA PICANTO I 1.0-1.2LPG 04.04-05.18

View part

HANS PRIES Air blower regulation element 821 952

Air blower regulation element fits: HYUNDAI ELANTRA V, ELANTRA VII, I30, TUCSON KIA CEE'D, CEED, PRO CEE'D, PROCEED, SOUL II, SPORTAGE IV, XCEED 1.0-2.4 09.10-

View part

HANS PRIES Variable timing phazes pulley 821 955

Camshaft phasing pulley (exhaust) fits: HYUNDAI I30, I40 I, I40 I CW, IX35, TUCSON, VELOSTER KIA CARENS IV, CEE'D, CEED, PRO CEE'D, RIO III, SOUL I, SOUL II, SPORTAGE III 1.4-1.6LPG 06.10-

View part

HANS PRIES Crankshaft sensor 821 958

Crankshaft position sensor fits: HYUNDAI I20 II, I30 KIA CEE'D, PRO CEE'D 1.4 07.13-07.18

View part

HANS PRIES Intake manifold pressure sensor 821 960

Intake manifold pressure sensor (3 pin with a sealing ring) fits: HYUNDAI ACCENT IV, ELANTRA VI, I20 II, I30, I40 I, I40 I CW, IX20, KONA, TUCSON KIA CARENS IV, CEE'D, CEED 1.0-1.7D 02.10-

View part

HANS PRIES Gearbox hydraulic filter 821 962

Gearbox hydraulic filter fits: HYUNDAI ATOS KIA PICANTO I 1.0/1.1/1.1D 02.98-09.11

View part

HANS PRIES ABS sensor 821 963

ABS sensor front R fits: HYUNDAI ELANTRA IV, I30 1.4-2.0D 11.05-12.13

View part

HANS PRIES ABS sensor 821 964

ABS sensor front L fits: HYUNDAI ELANTRA IV, I30 1.4-2.0D 11.05-

View part

HANS PRIES Gear shifter cable 821 967

Gearshift level cable (1315mm) fits: HYUNDAI I20 I 1.4D/1.6D 08.08-12.15

View part

HANS PRIES Gear shifter cable 821 968

Gearshift level cable (1342mm) fits: HYUNDAI I30 1.6D 01.10-06.12

View part

HANS PRIES Gear shifter cable 821 969

Gearshift level cable (1330mm) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.4D/1.6D 11.11-

View part

HANS PRIES Brake disc 821 976

Brake disc rear L/R fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-

View part

HANS PRIES Brake disc 821 978

Brake disc front L/R fits: HYUNDAI ACCENT V, I20 ACTIVE, I20 II, SOLARIS KIA RIO IV 1.0-1.6 11.14-

View part

HANS PRIES Fuel tank elements 821 981

Fuel tank elements fits: HYUNDAI ELANTRA VI, I30 KIA CEE'D, PRO CEE'D, RIO III, SOUL I, SOUL II 02.09-

View part

HANS PRIES Electropneumatic control valve 821 982

Electropneumatic control valve fits: HYUNDAI GRAND SANTA FÉ, I30, I40 I, I40 I CW, IX35, SANTA FE IV, SANTA FÉ II, SANTA FÉ III, TUCSON KIA CARENS IV, CEE'D, OPTIMA, PRO CEE'D 1.6-3.5 06.10-

View part

HANS PRIES Crankshaft sensor 821 983

Crankshaft position sensor fits: HYUNDAI ACCENT IV, I10 I, I10 II, I20 I, I20 II KIA PICANTO II, PICANTO III, RIO III, RIO IV 1.2-1.4 09.08-

View part

HANS PRIES Crankshaft sensor 821 984

Crankshaft position sensor fits: HYUNDAI GETZ, I10 I, I20 I KIA RIO III 1.1D/1.5D 07.04-12.17

View part

HANS PRIES MacPherson strut mount 821 986

MacPherson strut mount rear R fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-

View part

HANS PRIES ABS sensor 821 988

ABS sensor rear L fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-

View part

HANS PRIES ABS sensor 821 989

ABS sensor rear R fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-

View part

HANS PRIES Oil filter housing 821 998

Oil filter housing fits: HYUNDAI GRAND SANTA FÉ, IX35, SANTA FE IV, SANTA FÉ II, SANTA FÉ III, TUCSON KIA CARNIVAL III, SORENTO II, SORENTO III, SPORTAGE III 2.0D/2.0DH/2.2D 03.06-09.22

View part

HANS PRIES Camshaft position sensor 821 999

Camshaft position sensor (no wire) fits: HYUNDAI GETZ, I10 I KIA PICANTO I 1.1/1.1LPG 04.04-12.13

View part

HANS PRIES Gearbox hydraulic filter 822 003

Gearbox hydraulic filter fits: HYUNDAI ACCENT V, CRETA, ELANTRA VI, ELANTRA VII, I20 III, SANTA FE IV, SOLARIS, TUCSON KIA CEED, OPTIMA, RIO IV, SELTOS, SORENTO III, SORENTO IV 1.4-2.5 02.14-

View part

HANS PRIES MacPherson strut bearing 822 017

MacPherson strut bearing front L/R fits: HYUNDAI ACCENT IV, ACCENT V, BAYON, I10 I, I10 III, I20 ACTIVE, I20 I, I20 II, IX20, SOLARIS KIA PICANTO I, PICANTO II, PICANTO III 1.0-1.6LPG 04.04-

View part

HANS PRIES Exhaust system bolt 822 030

Exhaust system bolt (M10x1,25x12/22), 1pcs fits: HYUNDAI H-1 TRAVEL 2.5D 05.08-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account