Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Lights switch 822 031

Light switch stop fits: HYUNDAI ACCENT IV, ELANTRA V, I30, I40 I, I40 I CW, SANTA FÉ III, SONATA VI KIA CARENS IV, CEE'D, OPTIMA, PICANTO II, PRO CEE'D, RIO III, SORENTO II 11.09-

View part

HANS PRIES Tie rod (with no end) 822 034

Tie rod (with no end) L/R (length: 322mm) fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, NIRO, NIRO I, PROCEED, XCEED 1.0-Electric 10.15-

View part

HANS PRIES Clutch servo 822 035

Clutch actuator (20,64mm) fits: HYUNDAI GETZ, I20 I, IX20, MATRIX KIA SOUL I, VENGA 1.1D-1.6LPG 03.03-

View part

HANS PRIES ABS sensor 822 043

ABS sensor front L fits: HYUNDAI I10 I 1.0-1.2LPG 12.07-05.18

View part

HANS PRIES ABS sensor 822 044

ABS sensor front R fits: HYUNDAI I10 I 1.0-1.2LPG 12.07-05.18

View part

HANS PRIES MacPherson strut bearing 822 046

MacPherson strut bearing front L/R fits: HYUNDAI ELANTRA IV, ELANTRA VI, GRANDEUR, I30, IONIQ, KONA, SONATA VII, TUCSON KIA CEED, CERATO IV, NIRO, NIRO I, OPTIMA, PROCEED 1.0-Electric 11.05-

View part

HANS PRIES MacPherson strut mount 822 056

MacPherson strut mount front L/R fits: HYUNDAI I10 III, I20 ACTIVE, I20 II KIA PICANTO III 1.0-1.4D 11.14-

View part

HANS PRIES MacPherson strut mount 822 057

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

HANS PRIES Multi V-belt pulley 822 058

Multi V-belt pulley fits: HYUNDAI IX35, SANTA FE IV, SANTA FÉ III, SONATA VII KIA CERATO II, CERATO III, OPTIMA, SORENTO II, SORENTO III, SPORTAGE III 2.0/2.4/2.4LPG 01.09-12.20

View part

HANS PRIES Multi V-belt pulley 822 059

Multi V-belt pulley (plastic) fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA VI, GETZ, I10 I, I20 ACTIVE, I20 I, I20 II, I30, I40 I, I40 I CW, IX20, IX35, TUCSON KIA CARENS III 1.1D-1.7D 07.04-

View part

HANS PRIES Crankshaft pulley 822 064

Crankshaft pulley (number of ribs: 6) fits: HYUNDAI ACCENT IV, CRETA, ELANTRA IV, ELANTRA V, ELANTRA VI, I20 I, I30, I40 I, I40 I CW, IX20, IX35, KONA, SOLARIS, TUCSON, VELOSTER 1.4-2.0 04.04-

View part

HANS PRIES Air blower 822 067

Air blower fits: HYUNDAI CRETA, ELANTRA VI, I30 KIA CARENS IV 1.0-2.0 03.13-

View part

HANS PRIES Clutch servo 822 069

Clutch actuator (20,64mm) fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, ELANTRA V, I20 ACTIVE, I20 II, I30, I40 I, I40 I CW, IX35, SONATA VI, SONATA VII, TUCSON, VELOSTER 1.0-2.0LPG 04.04-

View part

HANS PRIES NOx sensor 822 070

NOx sensor fits: HYUNDAI I30 KIA CEED, PROCEED, XCEED 1.6D/1.6DH 03.17-

View part

HANS PRIES Shock absorber bumper 822 073

Shock absorber bumper rear L/R (height 91mm) fits: HYUNDAI I10 II, I30, I40 I, I40 I CW, IX35 KIA CEE'D, PICANTO II, SPORTAGE III 1.0-2.4 12.06-12.19

View part

HANS PRIES Alternator pulley 822 077

Alternator pulley fits: HYUNDAI I10 I, I20 I KIA PICANTO II, RIO III 1.2-1.2LPG 09.08-12.17

View part

HANS PRIES Alternator pulley 822 079

Alternator pulley fits: HYUNDAI H-1 CARGO, H-1 TRAVEL, H100 2.5D 02.08-

View part

HANS PRIES Clutch master cylinder 822 085

Clutch master cylinder (15,9mm), vehicle with the steering wheel on the left side fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.0D 08.09-12.16

View part

HANS PRIES MacPherson strut mount 822 086

MacPherson strut mount rear R (with a bearing) fits: HYUNDAI NEXO, TUCSON KIA SPORTAGE IV, SPORTAGE V 1.6-Electric 06.15-

View part

HANS PRIES Mechanical vacuum pump 822 090

Mechanical vacuum pump fits: HYUNDAI ACCENT III, ACCENT IV, GETZ, I10 I, I20 I, I30, IX20, MATRIX KIA CARENS III, CEE'D, CERATO I, PICANTO I, PRO CEE'D, RIO II, RIO III, SOUL I 1.1D-1.6D 07.04-

View part

HANS PRIES Stabilizer link 822 091

Stabilizer link front L/R 282mm fits: HYUNDAI ACCENT V, ELANTRA V, I20 ACTIVE, I20 II, I30, IX35, SOLARIS, TUCSON KIA CEE'D, PRO CEE'D, RIO III, RIO IV, SPORTAGE III, SPORTAGE IV 1.0-2.4 08.09-

View part

HANS PRIES Variable timing phazes pulley 822 093

Camshaft phasing pulley fits: HYUNDAI ACCENT IV, ELANTRA V, ELANTRA VII, I20 I, I30, IX20, VELOSTER KIA CARENS III, CEE'D, CERATO I, PRO CEE'D, RIO III, RIO IV, SOUL I, SOUL II 1.4-2.0D 05.06-

View part

HANS PRIES Disc brake caliper 822 097

Disc brake caliper rear R fits: HYUNDAI I10 I, I10 II, I20 ACTIVE, I20 II KIA RIO III 1.0-1.6 01.11-

View part

HANS PRIES Disc brake caliper 822 098

Disc brake caliper rear L fits: HYUNDAI I10 II, I20 ACTIVE, I20 II KIA RIO III 1.0-1.6 06.11-

View part

HANS PRIES Disc brake caliper 822 103

Disc brake caliper rear R fits: HYUNDAI I30 1.4-2.0D 10.07-06.12

View part

HANS PRIES Disc brake caliper 822 104

Disc brake caliper rear L fits: HYUNDAI I30 1.4-2.0D 10.07-06.12

View part

HANS PRIES Air blower regulation element 822 107

Air blower regulation element (resistor) fits: HYUNDAI ACCENT IV, IX35 KIA CERATO II, RIO III, SORENTO II, SPORTAGE III 1.1D-3.5 01.09-

View part

HANS PRIES Air blower regulation element 822 108

Air blower regulation element (resistor) fits: HYUNDAI ACCENT II, ACCENT III, GETZ, I10 I, I10 II KIA CARNIVAL II, PICANTO I, PICANTO II 1.0-2.9D 09.99-12.19

View part

HANS PRIES Intake manifold pressure sensor 822 109

Intake manifold pressure sensor (3 pin) fits: HYUNDAI GRAND SANTA FÉ, H-1 CARGO, H-1 TRAVEL, IX35, IX55, SANTA FE IV, SANTA FÉ II, SANTA FÉ III, TUCSON KIA CARNIVAL III, K2500 2.0D-3.0D 02.08-

View part

HANS PRIES ABS sensor 822 111

ABS sensor front L (with wire) fits: HYUNDAI I10 II 1.0/1.0LPG/1.2 08.13-

View part

HANS PRIES ABS sensor 822 112

ABS sensor front R fits: HYUNDAI I10 II 1.0/1.0LPG/1.2 08.13-

View part

HANS PRIES ABS sensor 822 113

ABS sensor front R fits: HYUNDAI IX35 1.6-Electric 08.09-12.15

View part

HANS PRIES ABS sensor 822 114

ABS sensor front L fits: HYUNDAI IX35 1.6-Electric 08.09-12.15

View part

HANS PRIES Lights switch 822 119

Light switch reversing fits: HYUNDAI ACCENT III, ELANTRA IV, I30 KIA CEE'D, CERATO I, PRO CEE'D, RIO II 03.05-12.13

View part

HANS PRIES Lights switch 822 120

Light switch reversing fits: HYUNDAI BAYON, I10 I, I10 II, I10 III, I20 I, I20 II, I20 III KIA PICANTO I, PICANTO II, PICANTO III, RIO III, RIO IV 04.04-

View part

HANS PRIES EGR valve 822 121

EGR valve fits: HYUNDAI I40 I, I40 I CW, IX35 KIA CARENS IV, OPTIMA, SPORTAGE III 1.7D 11.10-05.19

View part

HANS PRIES CR system elements 822 123

CR system elements, fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, ELANTRA V, GETZ, GRANDEUR, H-1, H-1 / STAREX, H-1 CARGO, H-1 TRAVEL, H100, I10 I, I20 I, I30, I40 I 4D56-T-D6EA 08.02-

View part

HANS PRIES Automatic transmission control 822 225

Gearbox control, cables set fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, I10 I, I10 II, I20 I, I30, IX20 KIA CEE'D, CERATO I, CERATO II, PRO CEE'D, RIO II, RIO III, SOUL I 1.0-2.0LPG 04.04-

View part

HANS PRIES Boot lid element 822 233

Boot lid element, trunk lid handle (black) fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

HANS PRIES Electropneumatic control valve 822 234

Electropneumatic control valve fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, ELANTRA V, H-1, H-1 / STAREX, H-1 CARGO, H-1 TRAVEL, I10 I, I20 I, I20 II, I30, I40 I, I40 I CW 1.1D-2.9D 07.01-

View part

HANS PRIES Wiper motor 822 235

Wiper motor front fits: KIA CEE'D, PRO CEE'D 12.06-07.18

View part

HANS PRIES NOx sensor 822 242

NOx sensor fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6D/1.6DH/2.0D 06.15-09.22

View part

HANS PRIES Brake master cylinder 822 243

Brake master cylinder (22,2mm) fits: HYUNDAI I30, TUCSON, VELOSTER KIA CEE'D, PRO CEE'D, SPORTAGE IV 1.0-2.4 03.11-

View part

HANS PRIES Exhaust manifold gasket 822 251

Exhaust/intake manifold gasket fits: HYUNDAI ELANTRA V, ELANTRA VI, I40 I, I40 I CW, IX35, SONATA VI, SONATA VII, TUCSON KIA CARENS IV, CERATO IV, CERATO KOUP III, OPTIMA 1.8/2.0/2.0H 09.10-

View part

HANS PRIES Cooling system stub-pipe 822 277

Cooling system stub-pipe fits: HYUNDAI ELANTRA VI, I30, VELOSTER KIA CEED, CERATO IV, XCEED 1.4-2.0 03.11-

View part

HANS PRIES Cooling system stub-pipe 822 282

Cooling system stub-pipe fits: HYUNDAI I10 I, I20 I 1.2/1.2LPG 09.08-05.18

View part

HANS PRIES Crankshaft sensor 822 284

Crankshaft position sensor fits: HYUNDAI ACCENT IV, I20 II, I30, I40 I, I40 I CW, IX20, TUCSON KIA CARENS IV, CEE'D, OPTIMA, PRO CEE'D, RIO III, RIO IV, SOUL II 1.4D/1.6D/1.7D 02.10-

View part

HANS PRIES Throttle 822 286

Throttle fits: HYUNDAI I30, I40 I, I40 I CW, IX35, TUCSON KIA CARENS IV, CEE'D, PRO CEE'D, SOUL I, SOUL II, SPORTAGE III, SPORTAGE IV 1.6/1.6LPG 06.10-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account