Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Front ball joint 183623

Axle ball joint L/R (bottom front) (cone diameter 20mm, with bolts with nuts) fits: CITROEN AMI FIAT TOPOLINO LANCIA YPSILON OPEL CORSA F, ROCKS-E PEUGEOT 208 II 1.2-Electric 06.19-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 183624

Front axle track control arm L transverse front 16 mm (with silentblock) fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83) 1.6-3.0H 11.18-

View part

FEBI BILSTEIN Front ball joint 183625

Axle ball joint R (front) (with bolts with nuts) fits: FORD TOURNEO CONNECT V761 FURGON/NADWOZIE, TOURNEO CONNECT V761 NADWOZIE WIELKO 1.5-2.0D 09.20-

View part

FEBI BILSTEIN Front ball joint 183626

Axle ball joint L/R (bottom front) (with nuts) fits: AUDI Q4 E-TRON CUPRA BORN FORD CAPRI FORD USA EXPLORER SKODA ELROQ, ENYAQ IV VW ID.3, ID.4, ID.5, ID.7 Electric 11.19-

View part

FEBI BILSTEIN Stabilizer link 183627

Stabilizer link front L/R 298mm fits: FORD FOCUS IV 1.0-2.3 01.18-11.25

View part

FEBI BILSTEIN Front ball joint 183628

Axle ball joint L/R (bottom front) fits: HYUNDAI BAYON, CRETA, ELANTRA VII, I20 ACTIVE, I20 II, I20 III, VENUE KIA K4 1.0-2.0 11.14-

View part

FEBI BILSTEIN MacPherson strut bearing 183629

MacPherson strut bearing front L/R fits: LEXUS HS TOYOTA ALPHARD / VELLFIRE, AVENSIS, MARK X ZIO I, MIRAI, PREVIA III, PRIUS, PRIUS PLUS, RAV 4 IV, VERSO 1.6-Electric 10.05-

View part

FEBI BILSTEIN Shock absorber bumper 18363

Shock absorber bumper rear L/R (height 134mm) fits: AUDI A4 B5 1.6-2.8 11.94-09.01

View part

FEBI BILSTEIN Engine mount 183630

Engine mount from gearbox side L, inner, rubber-metal fits: ABARTH 500E FIAT 500E Electric 10.20-

View part

FEBI BILSTEIN Oil radiator 183631

Oil radiator (the set contains a filter vehicles with oil radiator) fits: CHEVROLET AVEO, CRUZE, ORLANDO, TRAX OPEL ADAM, ASTRA J, ASTRA J GTC, CASCADA, CORSA D, CORSA E 1.4/1.4LPG 12.09-

View part

FEBI BILSTEIN Axle shaft 183632

Drive axle shaft front L 655mm fits: PEUGEOT 207 1.4/1.4D/1.4LPG 02.06-12.15

View part

FEBI BILSTEIN Axle shaft 183633

Drive axle shaft front L 474mm fits: SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON, TOLEDO III VW CADDY ALLTRACK IV, CADDY ALLTRACK IV FURGON/NADWOZIE WIELKOPRZESTRZENNE, CADDY III 1.9D-3.2 08.03-

View part

FEBI BILSTEIN Axle shaft 183634

Drive axle shaft front L 634mm fits: DODGE CALIBER JEEP COMPASS, PATRIOT 1.8-2.4LPG 06.06-

View part

FEBI BILSTEIN Axle shaft 183635

Drive axle shaft front L/R 1028mm fits: VOLVO XC60 I VW BEETLE 2.0D/2.4D 05.08-09.18

View part

FEBI BILSTEIN Axle shaft 183636

Drive axle shaft front R 855mm fits: CITROEN C3 II, DS3 PEUGEOT 207 1.0-1.6D 02.06-

View part

FEBI BILSTEIN Shock absorber bumper 18364

Shock absorber bumper front L/R (height 83mm) fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Housing/cover of side mirror 183640

Housing/cover of side mirror L fits: DAF XF II, XG, XG+ 06.21-

View part

FEBI BILSTEIN Brake pad set 183641

Brake pads set front/rear , fits: VW GARBUS 1.2-1.6 01.60-07.03

View part

FEBI BILSTEIN Steering gear hydraulic pump 183642

Hydraulic pump, power steering fits: MERCEDES ATEGO, ATEGO 2, AXOR, AXOR 2, CONECTO (O 345), O 403, TOURISMO (O 350), TRAVEGO (O 580), ZETROS 01.98-

View part

FEBI BILSTEIN Steering gear hydraulic pump 183643

Hydraulic pump, power steering (new) fits: NISSAN NV400 OPEL MOVANO A, MOVANO B RENAULT MASTER II, MASTER III 2.2D-3.0D 12.97-

View part

FEBI BILSTEIN Axle shaft 183644

Drive axle shaft front R 944mm fits: FORD GALAXY II, GALAXY MK II, MONDEO IV, S-MAX 2.0D 05.06-06.15

View part

FEBI BILSTEIN Crankcase control valve 183645

Crankcase control valve fits: MERCEDES C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204), CLK (A209), CLK (C209), CLS (C219), E (A207), E (C207), E T-MODEL (S211) 2.1D/3.0D 01.05-12.19

View part

FEBI BILSTEIN Engine mount 183646

Engine mount rear, rubber-metal fits: FIAT PANDA 0.9-1.3D 02.12-

View part

FEBI BILSTEIN Brake pad set 183647

Brake pads set front , fits: PORSCHE 911 VW GARBUS 1.3-2.0 01.63-07.03

View part

FEBI BILSTEIN Engine mount 183648

Engine mount rear, rubber-metal fits: FIAT PANDA LANCIA YPSILON 0.9/0.9CNG 05.11-

View part

FEBI BILSTEIN Engine mount 183649

Engine mount front R, rubber-metal fits: FIAT GRANDE PUNTO, PUNTO, PUNTO EVO 1.2-1.4LPG 06.05-

View part

FEBI BILSTEIN Shock absorber bumper 18365

Shock absorber bumper front L/R (height 63mm) fits: AUDI A1, A3, TT SEAT AROSA, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, MII, TOLEDO II, TOLEDO IV SKODA E-CITIGO, FABIA II 1.0-Electric 02.88-

View part

FEBI BILSTEIN Brake pad set 183650

Brake pads set front , fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-

View part

FEBI BILSTEIN Engine mount 183651

Engine mount from gearbox side L, top, rubber-metal fits: FIAT PANDA 1.2/1.3D 02.12-

View part

FEBI BILSTEIN Engine mount 183652

Engine mount on engine side R, rubber-metal fits: FIAT PANDA 0.9/0.9CNG/1.3D 02.12-

View part

FEBI BILSTEIN Axle shaft 183653

Drive axle shaft front L/R 631mm fits: NISSAN NAVARA, NAVARA NP300, PATHFINDER III 2.5D/3.0D 11.01-

View part

FEBI BILSTEIN Brake pad set 183654

Brake pads set front , fits: SUZUKI SWIFT V 1.0-1.2H 01.17-

View part

FEBI BILSTEIN Brake pad set 183655

Brake pads set front , fits: HYUNDAI IONIQ 5, IONIQ 6, TUCSON KIA EV6, SPORTAGE V 1.6-Electric 10.20-

View part

FEBI BILSTEIN Brake pad set 183656

Brake pads set front , fits: MG MG 350, MG 5, ZS 1.0/1.5 01.11-

View part

FEBI BILSTEIN Brake pad set 183657

Brake pads set rear (with clamps), fits: AUDI A3, A3 ALLSTREET CUPRA FORMENTOR, LEON, LEON SPORTSTOURER FORD TOURNEO CONNECT V761 FURGON/NADWOZIE 1.0-2.5 07.19-

View part

FEBI BILSTEIN Brake pad set 183658

Brake pads set front , fits: MAZDA 2 TOYOTA AYGO X, YARIS 1.0/1.5/1.5H 02.20-

View part

FEBI BILSTEIN Side mirror glass 183659

Side mirror glass L (209 x210mm, with heating) fits: DAF XF II, XG, XG+ 06.21-

View part

FEBI BILSTEIN Stabilizer link 18366

Stabilizer link front L/R 73mm fits: SEAT AROSA, IBIZA II VW CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF III, LUPO I, POLO, POLO III 1.0-1.9D 08.93-07.05

View part

FEBI BILSTEIN Side mirror glass 183660

Side mirror glass R (209 x210mm, with heating) fits: DAF XF II, XG, XG+ 06.21-

View part

FEBI BILSTEIN Stabilizer bar bushing 183661

Stabilizer bar bushing front L/R (23mm) fits: SUBARU CROSSTREK, FORESTER, LEVORG, OUTBACK, WRX, XV 1.6-2.5 03.12-

View part

FEBI BILSTEIN Engine mount 183662

Engine mount rear R, rubber-metal (support) fits: FIAT 500L 0.9-1.6D 09.12-

View part

FEBI BILSTEIN Engine mount 183664

Engine mount front R, top, rubber-metal fits: FIAT PANDA 1.3D 02.12-

View part

FEBI BILSTEIN Engine mount 183665

Engine mount rear, top, rubber-metal fits: CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, GRAND C4 SPACETOURER, JUMPY III, SPACETOURER FIAT SCUDO 2.0D 06.13-

View part

FEBI BILSTEIN Engine mount 183667

Engine mount rear L, rubber-metal fits: FIAT PANDA LANCIA YPSILON 0.9-1.3D 08.10-

View part

FEBI BILSTEIN Engine mount 183668

Engine mount rear R, rubber-metal fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II 1.5/2.0 09.13-12.18

View part

FEBI BILSTEIN Engine mount 183669

Engine mount rear R, rubber-metal fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.4/1.6D 02.10-12.23

View part

FEBI BILSTEIN Shock absorber bumper 18367

Shock absorber bumper rear L/R (height 100mm) fits: AUDI 80 B4 1.6-2.8 09.91-01.96

View part

FEBI BILSTEIN Crankcase control valve 183670

Crankcase control valve fits: SEAT CORDOBA, IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA I, FABIA I PRAKTIK, FABIA II, RAPID, ROOMSTER 1.2/1.2LPG 10.01-02.18

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account