Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Engine mount 183671

Engine mount front R, top, rubber-metal fits: FIAT 500, 500 C, 500L, PANDA LANCIA YPSILON 0.9-1.4 07.07-

View part

FEBI BILSTEIN Stabilizer bar bushing 183672

Stabilizer bar bushing rear L/R (16mm) fits: CITROEN C4 AIRCROSS MITSUBISHI ASX, OUTLANDER III PEUGEOT 4008 1.6-2.2D 02.10-

View part

FEBI BILSTEIN Engine mount 183673

Engine mount front R, top, rubber-metal fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D/1.4 02.10-12.23

View part

FEBI BILSTEIN Engine mount 183674

Engine mount front R, top, hydraulic fits: FIAT TIPO 1.3D 10.15-

View part

FEBI BILSTEIN Axle shaft 183675

Drive axle shaft rear L 669mm fits: BMW I3 (I01) 0.65H/0.6H/Electric 08.13-07.22

View part

FEBI BILSTEIN Transmission mount 183676

Transmission mount inside L fits: NISSAN CUBE, JUKE, NOTE, NV200, NV200 / EVALIA, PULSAR, TIIDA 1.5D/1.6/1.8 09.04-

View part

FEBI BILSTEIN Rear suspension beam silent block 183677

Rear suspension beam silent block L/R fits: ABARTH 500E FIAT 500E Electric 10.20-

View part

FEBI BILSTEIN Engine mount 183678

Engine mount on engine side R, rubber-metal fits: FIAT PANDA LANCIA YPSILON 0.9/0.9CNG 05.11-

View part

FEBI BILSTEIN Engine mount 183679

Engine mount rear L, top, rubber-metal fits: VW PASSAT B6 1.4/1.6 03.05-11.10

View part

FEBI BILSTEIN Engine mount 183680

Engine mount rear L, rubber-metal fits: FIAT PANDA 1.3D 02.12-

View part

FEBI BILSTEIN Stabilizer bar bushing 183681

Stabilizer bar bushing rear L/R (23mm) fits: IVECO DAILY IV, DAILY V, DAILY VI 2.3D-Electric 05.06-

View part

FEBI BILSTEIN Differential brackets 183682

Differential brackets rear L (17,4x69,6x60mm) fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), Z4 (G29) TOYOTA SUPRA 2.0-3.0D 11.18-

View part

FEBI BILSTEIN Engine mount 183683

Engine mount from gearbox side L, top, rubber-metal fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

FEBI BILSTEIN Stabilizer bar bushing 183684

Stabilizer bar bushing front L/R (21mm) fits: FORD FIESTA VII 1.0-1.5D 05.17-

View part

FEBI BILSTEIN Engine mount 183685

Engine mount rear L, rubber-metal fits: FIAT BRAVO II, STILO LANCIA DELTA III 1.4-2.0D 09.05-12.14

View part

FEBI BILSTEIN Transmission mount 183686

Transmission mount L (automatic) fits: FIAT BRAVO II LANCIA DELTA III 1.4-1.9D 11.06-12.16

View part

FEBI BILSTEIN Transmission mount 183688

Transmission mount front L (automatic/manual) fits: FIAT 500, 500 C, PANDA LANCIA YPSILON 0.9-Electric 07.07-

View part

FEBI BILSTEIN Engine mount 183689

Engine mount rear R, rubber-metal fits: FIAT BRAVO II LANCIA DELTA III 1.4-2.0D 04.07-12.14

View part

FEBI BILSTEIN Shock absorber bumper 18369

Shock absorber bumper front L/R (height 85mm) fits: AUDI 80 B3, 80 B4, CABRIOLET B3, COUPE B2, COUPE B3 1.4-2.8 07.80-08.00

View part

FEBI BILSTEIN Engine mount 183690

Engine mount rear, rubber-metal fits: FIAT 500L 0.9-1.4LPG 09.12-12.21

View part

FEBI BILSTEIN Water pump 183691

Water pump, with a gasket fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26), 5 (G30, F90), 5 (G31), 5 (G60, G90 2.0/2.0H 11.15-

View part

FEBI BILSTEIN Engine mount 183692

Engine mount rear L, rubber-metal fits: FIAT 500, 500 C, PANDA LANCIA YPSILON 0.9-1.4 06.06-

View part

FEBI BILSTEIN Engine mount 183693

Engine mount front R, hydraulic fits: FIAT BRAVO II LANCIA DELTA III 1.6D-2.0D 09.07-12.14

View part

FEBI BILSTEIN Engine mount 183694

Engine mount rear (rubber-metal) fits: IVECO DAILY IV, DAILY V, DAILY VI ELETTRICO-F1CGL411A 05.06-

View part

FEBI BILSTEIN Engine mount 183695

Engine mount front R, hydraulic fits: ALFA ROMEO 4C, 4C SPIDER, GIULIETTA, MITO FIAT BRAVO, BRAVO II LANCIA DELTA III 1.4-2.0D 04.07-12.20

View part

FEBI BILSTEIN Water pump 183697

Water pump, with a gasket fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, ELANTRA V, ELANTRA VI, GETZ, I10 I, I20 ACTIVE, I20 I, I20 II, I30, I40 I, I40 I CW, IX20, IX35, MATRIX 1.1D-1.7D 07.04-

View part

FEBI BILSTEIN Flexible brake hoses 183698

Brake pipe/hose front L (length 625mm) fits: NISSAN QASHQAI II, X-TRAIL, X-TRAIL III 1.3-2.0D 11.13-

View part

FEBI BILSTEIN Flexible brake hoses 183699

Brake pipe/hose front R (length 625mm) fits: NISSAN QASHQAI II, X-TRAIL, X-TRAIL III 1.2-2.0D 11.13-

View part

FEBI BILSTEIN Brake camshaft repair kit 18370

Brake expander shaft repair kit fits: SAF 5, B, EBN, ERZ, ERZM, ERZT, ES, ESN, ESNM, ESNMP, EU, EZN, EZNP, RBM, RLBM, RLS, RLSM, RS, RSK, RSM, RSMP, RST, RZ, RZM, RZMP, RZT, S, SK, SKRLS, SKRLZ

View part

FEBI BILSTEIN Flexible brake hoses 183700

Brake pipe/hose rear L (length 186mm) fits: NISSAN QASHQAI II 1.2-2.0 11.13-04.21

View part

FEBI BILSTEIN Flexible brake hoses 183701

Brake pipe/hose rear R (length 186mm) fits: NISSAN QASHQAI II 1.2-2.0 11.13-04.21

View part

FEBI BILSTEIN Flexible brake hoses 183702

Brake pipe/hose rear L/R (length 435mm/435mm) fits: FORD TRANSIT V363 2.0D/2.0DH/2.2D 08.13-

View part

FEBI BILSTEIN Flexible brake hoses 183703

Brake pipe/hose rear L/R (length 203mm) fits: RENAULT TWINGO III SMART FORFOUR, FORTWO 0.9-Electric 07.14-

View part

FEBI BILSTEIN Air filter 183705

Air filter (Cartridge) fits: BMW 1 (F70), 2 GRAN COUPE (F74), 2 (U06), X1 (U11), X2 (U10) MINI (F66, F65), COUNTRYMAN (U25) 1.5-2.0H 11.21-

View part

FEBI BILSTEIN Engine mount 183706

Engine mount in the front R, top, rubber-metal fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C 1.4 05.08-

View part

FEBI BILSTEIN Engine mount 183708

Engine mount front R, rubber-metal fits: ALFA ROMEO GIULIETTA 1.4LPG 12.11-02.17

View part

FEBI BILSTEIN Water pump 183709

Water pump, with a gasket fits: MAZDA 3, 6, CX-5 2.2D 04.12-

View part

FEBI BILSTEIN Shock absorber bumper 18371

Shock absorber bumper front L/R (height 98mm) fits: AUDI 80 B4 1.9D-2.8 09.91-01.96

View part

FEBI BILSTEIN Shock absorber assembly kit 183710

Shock absorber assembly kit rear fits: AUDI A3, Q3 CUPRA FORMENTOR, LEON, LEON SPORTSTOURER SEAT LEON, LEON SC, LEON SPORTSTOURER, LEON ST, TARRACO SKODA KODIAQ I, OCTAVIA III 1.0-2.5 08.12-

View part

FEBI BILSTEIN Gearbox hydraulic filter 183711

Gearbox hydraulic filter fits: CHEVROLET MALIBU, TRAILBLAZER OPEL ASTRA K 1.3/1.4/1.5 09.15-

View part

FEBI BILSTEIN Air tank fitting 183712

Air tank fitting (diameter: 276mm, width: 50) fits: SCANIA 4, G I, P I, R I, T 05.95-09.22

View part

FEBI BILSTEIN Brake pad set 183713

Brake pads set front , fits: FORD PUMA 1.0-1.5D 09.19-

View part

FEBI BILSTEIN Hydraulic filter 183714

Hydraulic filter (cartridge) height: 68,5mm inner diameter: 26,3mm outer diameter: 55,5mm, FENDT 2 D FARMER, 2 S FARMER, 3 S FARMER, 3 S FAVORIT, 4 S FARMER, 5 S FARMER, 14 S FARMER, 102 FARMER

View part

FEBI BILSTEIN Brake pad set 183715

Brake pads set rear (with a damping pad), fits: TESLA MODEL S, MODEL X Electric 09.12-04.26

View part

FEBI BILSTEIN Brake pad set 183716

Brake pads set front , fits: ABARTH 500E FIAT 500, 500 C, 500E, TIPO 1.0-Electric 09.12-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 183717

Rear axle track control arm L/R (outer, outside, transverse, with silentblock) fits: HYUNDAI I30 KIA CEE'D, CEED, PRO CEE'D 1.0-2.0 11.11-

View part

FEBI BILSTEIN Front ball joint 183718

Axle ball joint L/R (bottom front) fits: MERCEDES GLE (C167), GLE (V167), GLS (X167) 2.0D-4.0H 10.18-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 183719

Front axle track control arm R transverse front 16 mm (with silentblock) fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83) 1.6-3.0H 11.18-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account