Partios Wholesale catalogue
Deuter Supplier | Suspension & Steering
Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)
451 current catalogue lines
About the DEUTER range
Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.
Catalogue products
Vehicle references are indicative — confirm against the article number.
DEUTER Suspension sleeve DEUMP2KPL2/27/23/60
Suspension sleeves L/R, 40pcs, fitting position: front/rear, set, hardness: 75 Sha/90 Sha fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-
View partDEUTER Suspension sleeve DEUMP2KPL2/29/23/60
Suspension sleeves, fitting position: front/rear, set fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-
View partDEUTER Suspension sleeve DEUMP2KPL2/30/24/60
Suspension sleeves, fitting position: front/rear, set (front sleeve: 30 mm., rear sleeve stabilizer: 24 mm. rear wishbone socket diameter - 65 mm.) fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-
View partDEUTER Suspension sleeve DEUMP3KPL1
Suspension sleeves L/R, 1pcs, fitting position: front/rear fits: MITSUBISHI PAJERO III 2.5D/3.2D/3.5 04.00-01.07
View partDEUTER Suspension sleeve DEUMP3KPL4
Suspension sleeves L/R, 16pcs, fitting position: rear, In the back fits: MITSUBISHI PAJERO III 2.5 TDi (V64W)/2.5 TDi (V64W, V74W)/3.2 4WD (V98W)/3.2 DI-D (V68W)/3.2 DI-D (V68W, V78W)/3.2 DI-D (V88W,
View partDEUTER Suspension sleeve DEUMP4KPL1
Suspension sleeves L/R, 26pcs, fitting position: front/rear, set, hardness: 75 Sha fits: MITSUBISHI PAJERO IV 3.2D/3.8 10.06-
View partDEUTER Suspension sleeve DEUMP4KPL2
Suspension sleeves L/R, 8pcs, fitting position: front, set fits: MITSUBISHI PAJERO IV 3.2D/3.8 10.06-
View partDEUTER Suspension sleeve DEUMPKPL1
Suspension sleeves L/R, 8pcs, fitting position: rear, set/trailing arm, hardness: 75 Sha fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07
View partDEUTER Suspension sleeve DEUMPL200
Suspension sleeves, fitting position: front/rear fits: MITSUBISHI L200 2.0/2.4/2.5D 06.96-12.07
View partDEUTER Suspension sleeve DEUND21
Suspension sleeves, 1pcs, fitting position: front/rear fits: NISSAN PICK UP 2.4-3.0 11.85-
View partDEUTER Suspension sleeve DEUNPBLKPL1/3D
Suspension sleeves, 10pcs, set, hardness: 75 Sha (for 3-door version) fits: NISSAN PATROL GR IV 2.8D/4.2/4.2D 09.88-
View partDEUTER Suspension sleeve DEUNPD22KPL1
Suspension sleeves L/R, 24pcs, fitting position: front/rear, hardness: 75 Sha (set) fits: NISSAN NAVARA D-22
View partDEUTER Suspension sleeve DEUNPGU3KPL2
Suspension sleeves, 22pcs, fitting position: front/rear, set, hardness: 75 Sha fits: NISSAN PATROL GR V 3.0D/4.2/4.8 03.00-
View partDEUTER Suspension sleeve DEUNPGU3KPL2/23
Suspension sleeves, 22pcs, fitting position: front/rear, set, hardness: 75 Sha fits: NISSAN PATROL GR V 3.0D/4.2/4.8 03.00-
View partDEUTER Suspension sleeve DEUNPGU3KPL3
Suspension sleeves, 22pcs, fitting position: front/rear, set, hardness: 75 Sha fits: NISSAN PATROL GR V 3.0D/4.2/4.8 03.00-
View partDEUTER Suspension sleeve DEUNPGU3KPL3/23
Suspension sleeves, 22pcs, fitting position: front/rear, set, hardness: 75 Sha fits: NISSAN PATROL GR V 3.0D/4.2/4.8 03.00-
View partDEUTER Suspension sleeve DEUNPGU3KPL4
Suspension sleeves L/R, 12pcs, fitting position: front, set, hardness: 75 Sha/85 Sha (centric) fits: NISSAN PATROL GR V 2.8D-4.8 06.97-
View partDEUTER Suspension sleeve DEUNPK160KPL1
Suspension sleeves L/R, 10pcs, fitting position: front, set, hardness: 75 Sha fits: NISSAN PATROL III/1, PATROL III/2 2.8-3.3D 11.79-
View partDEUTER Suspension sleeve DEUNPK160KPL2
Suspension sleeves L/R, 12pcs, fitting position: rear, set, hardness: 75 Sha/85 Sha fits: NISSAN PATROL III/1 2.8/3.3D 11.79-08.88
View partDEUTER Suspension sleeve DEUNPK260KPL1
Suspension sleeves L/R, 16pcs, fitting position: front/rear, set, hardness: 75 Sha fits: NISSAN PATROL III/1, PATROL III/2 2.8-3.3D 11.79-
View partDEUTER Suspension sleeve DEUNPKPL1
Suspension sleeves L/R, 1pcs, fitting position: front/rear, set fits: NISSAN PATROL GR IV, PATROL GR V 2.8D/4.2/4.2D 09.88-
View partDEUTER Suspension sleeve DEUNPKPL1MC
Suspension sleeves, fitting position: front/rear, set, hardness: 75 Sha fits: NISSAN PATROL GR IV, PATROL GR V 2.8D/4.2/4.2D 09.88-
View partDEUTER Suspension sleeve DEUNPKPL1MM
Suspension sleeves, 1pcs, fitting position: front/rear, set, Bottom/Top, hardness: 75 Sha/90 Sha (off-centre - for lift) fits: NISSAN PATROL GR IV, PATROL GR V 2.8D/4.2/4.2D 09.88-
View partDEUTER Suspension sleeve DEUNPKPL2M
Suspension sleeves L/R, 12pcs, fitting position: front, hardness: 75 Sha (off-centre - for lift set) fits: NISSAN PATROL GR IV, PATROL GR V 2.8D-4.8 09.88-
View partDEUTER Polyurethane suspension sleeve DEUNSXKPL1
Polyurethane suspension bushings set (32pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: NISSAN 200SX 07.88-12.99
View partDEUTER Polyurethane suspension sleeve DEUNSXKPL1/14/28/35
Polyurethane suspension bushings set, front/rear,
View partDEUTER Suspension sleeve DEUNTKPL1
Suspension sleeves L/R, 1pcs, fitting position: rear, hardness: 75 Sha fits: NISSAN TERRANO I 2.4/2.7D/3.0 10.87-02.96
View partDEUTER Suspension sleeve DEUNTKPL2
Suspension sleeves L/R, 14pcs, fitting position: front, set, In the front, hardness: 75 Sha/85 Sha fits: FORD MAVERICK NISSAN TERRANO II 2.0-3.3 10.92-
View partDEUTER Suspension sleeve DEUNTKPLC2
Suspension sleeves, fitting position: front/rear fits: NISSAN TERRANO II 2.4/2.7D/3.0D 02.93-09.07
View partDEUTER Polyurethane suspension sleeve DEUOAHKPL5
Komplet poliuretanowych tulei wahaczy przednich dolnych - OPEL Astra H - 4szt.
View partDEUTER Suspension sleeve DEUOFBKPLT
Suspension sleeves, 16pcs, fitting position: rear, set, hardness: 75 Sha fits: OPEL FRONTERA B 2.2/2.2D/3.2 09.98-07.04
View partDEUTER Suspension sleeve DEUOFKPL1
Suspension sleeves, 1pcs, fitting position: front/rear fits: OPEL FRONTERA B 2.2/2.2D/3.2 09.98-07.04
View partDEUTER Suspension sleeve DEUOFKPL2
Suspension sleeves, 1pcs, fitting position: front/rear fits: OPEL FRONTERA A, FRONTERA A SPORT 2.0-2.8D 03.92-10.98
View partDEUTER Other suspension elements DEUOP90/110
Odbój poliuretanowy fi 90x110 mm -śruba 12
View partDEUTER Other suspension elements DEUOP90/150
Odbój poliuretanowy fi 90x150 mm -śruba 12
View partDEUTER Suspension sleeve DEUOS2
Suspension sleeves, 1pcs, fitting position: front/rear
View partDEUTER Other suspension elements DEUOS3
Odbój poliuretanowy fi 65 x 115 mm -śruba '10 /walcowy/
View partDEUTER Polyurethane suspension sleeve DEUP1069/75
Polyurethane rear beam bushing (1pcs, L/R, rear, hardness: 75 Sha) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94
View partDEUTER Polyurethane suspension sleeve DEUP1069/85
Polyurethane rear beam bushing (1pcs, L/R, rear, hardness: 85 Sha) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94
View partDEUTER Polyurethane suspension sleeve DEUP1073/85
Polyurethane bushing (1pcs, beam/front swingarm, L/R, hardness: 85 Sha, inner diameter 10mm, outer diameter 32/37mm) fits: FORD ESCORT III, ESCORT III EXPRESS, ESCORT IV 05.76-02.93
View partDEUTER Polyurethane suspension sleeve DEUP1097/1098
Polyurethane suspension sleeve (1pcs, front rear swingarm, L/R, hardness: 75 Sha, outer diameter 60mm) fits: BMW 3 (E46) 12.97-12.07
View partDEUTER Other suspension elements DEUP1120
Przegub elastyczny wału napędowego - BMW - 1szt.
View partDEUTER Polyurethane suspension sleeve DEUP1188
Poliuretanowa tuleja wahacza przedniego dolnego tylnego - Lancia Thesis - 1szt.
View partDEUTER Polyurethane suspension sleeve DEUP1239
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, front bottom rear swingarm, L/R, bottom, hardness: 75 Sha) fits: CITROEN BERLINGO 06.96-
View partDEUTER Drive shaft flexible joint DEUP1255
Propeller shaft elastic coupling in the front fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 2.5D-4.8 09.02-12.10
View partDEUTER Polyurethane suspension sleeve DEUP1364/32
Polyurethane suspension sleeve (1pcs, rear trolley, L/R, rear axle, hardness: 90 Sha, outer diameter 32mm) fits: SUBARU FORESTER, IMPREZA 08.92-06.09
View partDEUTER Polyurethane suspension sleeve DEUP1470/1471
Polyurethane front Swingarm bushing (1pcs, rear, L/R, bottom, hardness: 90 Sha, outer diameter 66mm) fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 12.97-02.09
View partDEUTER Suspension sleeve DEUP180/MIMO
Suspension sleeves L/R, 1pcs, fitting position: front/rear, trailing arm, hardness: 75 Sha (off-centre - for lift) fits: SUZUKI JIMNY 1.3/1.5D 09.98-
View partBuying with Partios
Buying DEUTER parts through Partios
Are these genuine DEUTER parts?
- Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source DEUTER parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.
Do you supply DEUTER parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on DEUTER parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a DEUTER order?
- It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for DEUTER parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account