Partios Wholesale catalogue
Deuter Supplier | Suspension & Steering
Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)
451 current catalogue lines
About the DEUTER range
Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.
Catalogue products
Vehicle references are indicative — confirm against the article number.
DEUTER Suspension sleeve DEUP181
Suspension sleeves, fitting position: rear, lateral bar, hardness: 75 Sha fits: SUZUKI GRAND VITARA I 1.6-2.7 03.98-
View partDEUTER Polyurethane suspension sleeve DEUP1857
Polyurethane suspension sleeve (1pcs, rear bottom swingarm, hardness: 90 Sha) fits: CHEVROLET CAMARO 09.09-
View partDEUTER Polyurethane suspension sleeve DEUP187
Polyurethane bushing (1pcs, rear trolley, L/R, hardness: 75 Sha) fits: NISSAN 200SX 07.88-12.99
View partDEUTER Polyurethane suspension sleeve DEUP187B
Polyurethane bushings set (4pcs, rear trolley, L/R, hardness: 75 Sha) fits: NISSAN 200SX 07.88-12.99
View partDEUTER Suspension sleeve DEUP217
Suspension sleeves L/R, 1pcs, fitting position: front/rear, stabilizer fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05
View partDEUTER Polyurethane suspension sleeve DEUP219
Polyurethane front Swingarm bushing (1pcs, front, L/R, bottom, hardness: 85 Sha, inner diameter 12mm, outer diameter 36/39mm) fits: NISSAN CUBE, MICRA C+C III, MICRA III, NOTE, NV200 09.98-
View partDEUTER Suspension sleeve DEUP228
Suspension sleeves L/R, 1pcs, fitting position: rear fits: NISSAN PATROL GR IV, PATROL GR V, TERRANO I, TERRANO II 2.4-4.8 10.87-
View partDEUTER Suspension sleeve DEUP229M
Suspension sleeves L/R, 4pcs, fitting position: front, swingarm, hardness: 75 Sha (off-centre - for lift set) fits: NISSAN PATROL GR IV, PATROL GR V TOYOTA LAND CRUISER 2.4-4.8 11.84-
View partDEUTER Polyurethane suspension sleeve DEUP240C1
Polyurethane suspension sleeve (1pcs, rear top swingarm, top, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15
View partDEUTER Polyurethane suspension sleeve DEUP275
Polyurethane suspension sleeve (1pcs, front swingarm, L/R, hardness: 75 Sha) fits: SUBARU IMPREZA 08.92-06.09
View partDEUTER Polyurethane suspension sleeve DEUP276/277
Polyurethane bushing (1pcs, control rod, L/R, hardness: 75 Sha) fits: NISSAN 200SX, 300ZX 07.88-12.99
View partDEUTER Polyurethane suspension sleeve DEUP283
Polyurethane suspension sleeve (1pcs, front swingarm, bottom, hardness: 75 Sha) fits: SUBARU IMPREZA 08.92-06.09
View partDEUTER Polyurethane suspension sleeve DEUP284C1
Polyurethane suspension sleeve (1pcs, rear swingarm - hub mounting, hardness: 75 Sha) fits: SUBARU IMPREZA 08.92-06.09
View partDEUTER Polyurethane suspension sleeve DEUP307
Polyurethane suspension sleeve (1pcs, beam, hardness: 75 Sha) fits: SUBARU IMPREZA 08.92-06.09
View partDEUTER Engine bracket DEUP317
Polyurethane engine pad 1 pcs, 75 Sha, eccentric, fits: BMW 5 (E34) 2.0/2.5 06.87-08.95
View partDEUTER Suspension sleeve DEUP372
Suspension sleeves L/R, 1pcs, fitting position: front/rear fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05
View partDEUTER Polyurethane suspension sleeve DEUP378C1
Polyurethane suspension sleeve (1pcs, front/front swingarm, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15
View partDEUTER Polyurethane suspension sleeve DEUP379
Polyurethane suspension sleeve (1pcs, front swingarm, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15
View partDEUTER Polyurethane suspension sleeve DEUP379/468
Polyurethane suspension sleeve (1pcs, rear top transverse swingarm, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15
View partDEUTER Polyurethane suspension sleeve DEUP387
Polyurethane suspension sleeve (1pcs, front bottom swingarm, hardness: 75 Sha) fits: BMW 5 (E39) 09.95-06.03
View partDEUTER Polyurethane suspension sleeve DEUP387C
Polyurethane bushing, 1pcs, bottom/swingarm, L/R, top, hardness: 75 Sha, + silicone fitting grease fits: HONDA HR-V 1.6 03.99-09.05
View partDEUTER Suspension sleeve DEUP389
Suspension sleeves, 1pcs, fitting position: front/rear fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05
View partDEUTER Suspension sleeve DEUP39
Suspension sleeves L/R, 1pcs, fitting position: front, swingarm, Top, hardness: 75 Sha fits: TOYOTA LAND CRUISER 80 4.0/4.2D/4.5 01.90-12.97
View partDEUTER Polyurethane suspension sleeve DEUP390
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, axle, L, hardness: 75 Sha) fits: BMW 3 (E46) 12.97-12.07
View partDEUTER Polyurethane suspension sleeve DEUP400A/B/75/85
Polyurethane front Swingarm bushing (1pcs, rear, L/R, hardness: 75 Sha/85 Sha) fits: BMW 3 (E30), 3 (E36) 09.82-08.00
View partDEUTER Suspension sleeve DEUP412
Suspension sleeves, 1pcs, fitting position: rear fits: JEEP CHEROKEE, GRAND CHEROKEE II, LIBERTY 2.4-4.7 10.98-01.08
View partDEUTER Polyurethane suspension sleeve DEUP435
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, axle, hardness: 75 Sha) fits: BMW 3 (E46) 12.97-07.05
View partDEUTER Polyurethane suspension sleeve DEUP435B
Polyurethane suspension sleeve (1pcs, axle suspension, L/R, hardness: 75 Sha) fits: BMW 3 (E36) 09.90-08.00
View partDEUTER Polyurethane suspension sleeve DEUP444
Polyurethane front Swingarm bushing (1pcs, L/R, front, hardness: 80 Sha, inner diameter 14mm, outer diameter 30/55mm) fits: PEUGEOT 206, 206+ 08.98-
View partDEUTER Polyurethane suspension sleeve DEUP465
Polyurethane bushing (1pcs, beam, L/R, hardness: 75 Sha, inner diameter 12mm, outer diameter 69mm) fits: AUDI A3, A4 B5, TT SEAT CORDOBA, IBIZA III, LEON, TOLEDO II, TOLEDO III 01.95-
View partDEUTER Polyurethane suspension sleeve DEUP466
Polyurethane bushing (1pcs, beam, L/R, hardness: 75 Sha, inner diameter 12mm, outer diameter 70mm) fits: SEAT CORDOBA, IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-05.15
View partDEUTER Polyurethane suspension sleeve DEUP483
Tuleje poliuretanowe wahacza tylnego dolnego poprzecznego - AUDI / SEAT / SKODA/ VW - 1szt.
View partDEUTER Polyurethane suspension sleeve DEUP484
Polyurethane suspension sleeve (1pcs, front bottom swingarm, L/R, rear, hardness: 85 Sha, inner diameter 13mm, outer diameter 27/60mm) fits: AUDI A1, A3, TT SEAT CORDOBA, IBIZA III 09.96-
View partDEUTER Polyurethane suspension sleeve DEUP513
Polyurethane bushing (1pcs, axle, hardness: 75 Sha) fits: MITSUBISHI OUTLANDER I 01.02-09.07
View partDEUTER Suspension sleeve DEUP516
Suspension sleeves L/R, 1pcs, fitting position: front/rear fits: JEEP GRAND CHEROKEE II, GRAND CHEROKEE III 2.7D-6.1 10.98-12.10
View partDEUTER Polyurethane suspension sleeve DEUP53
Polyurethane bushing (1pcs, + silicone fitting grease, axle suspension, hardness: 75 Sha) fits: BMW 3 (E30), 3 (E36) 09.82-08.00
View partDEUTER Suspension sleeve DEUP545
Suspension sleeves L/R, 1pcs, fitting position: rear, swingarm, Bottom, hardness: 75 Sha fits: JEEP CHEROKEE, LIBERTY 2.4-3.7 01.01-01.08
View partDEUTER Polyurethane suspension sleeve DEUP555C1/85
Polyurethane rear swingarm bushing (1pcs, hardness: 85 Sha) fits: CHEVROLET CAMARO 09.09-
View partDEUTER Polyurethane suspension sleeve DEUP565/566
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, front swingarm, L/R, hardness: 75 Sha, outer diameter 66mm) fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 12.97-02.09
View partDEUTER Polyurethane suspension sleeve DEUP585B
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, rear beam, L/R, hardness: 75 Sha, inner diameter 19mm, outer diameter 82mm) fits: BMW 5 (E39) 09.95-06.03
View partDEUTER Polyurethane suspension sleeve DEUP609
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, rear top swingarm, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15
View partDEUTER Polyurethane suspension sleeve DEUP609C1
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, front rear trailing swingarm, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15
View partDEUTER Polyurethane suspension sleeve DEUP622
Polyurethane suspension sleeve (front bottom swingarm, L/R, hardness: 75 Sha, inner diameter 19mm, outer diameter 30/55mm) fits: RENAULT AVANTIME, CLIO II, ESPACE III, LAGUNA I 11.93-04.05
View partDEUTER Polyurethane suspension sleeve DEUP623
Polyurethane suspension sleeve (front bottom rear swingarm, L/R, hardness: 75 Sha, inner diameter 12mm, outer diameter 29/58mm) fits: RENAULT LAGUNA I 11.93-08.02
View partDEUTER Polyurethane suspension sleeve DEUP669
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, top front swingarm, hardness: 75 Sha) fits: BMW 5 (E39) 09.95-05.04
View partDEUTER Polyurethane suspension sleeve DEUP676
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, beam, L/R, hardness: 75 Sha) fits: BMW 5 (E39) 09.95-05.04
View partDEUTER Polyurethane suspension sleeve DEUP714
Polyurethane suspension sleeve (1pcs, trailing arm - rear, for body, hardness: 75 Sha) fits: SUBARU IMPREZA 08.92-12.00
View partDEUTER Polyurethane suspension sleeve DEUP714C1
Polyurethane suspension sleeve (1pcs, + silicone fitting grease, differential gear mounting, hardness: 85 Sha) fits: SUBARU IMPREZA 08.92-12.08
View partBuying with Partios
Buying DEUTER parts through Partios
Are these genuine DEUTER parts?
- Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source DEUTER parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.
Do you supply DEUTER parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on DEUTER parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a DEUTER order?
- It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for DEUTER parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account