Partios Wholesale catalogue

Deuter Supplier | Suspension & Steering

Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)

451 current catalogue lines

About the DEUTER range

Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.

Catalogue products

Vehicle references are indicative — confirm against the article number.

DEUTER Polyurethane suspension sleeve DEUKPLPPUR72/1072/85

Polyurethane stabilizer bushing (2pcs, front swingarm/stabilizer, L/R, hardness: 85 Sha) fits: FORD ESCORT V, ESCORT VI, SCORPIO I, SIERRA I, SIERRA II 08.82-10.98

View part

DEUTER Spring washer DEUKPLPSJW1P

Spring washer front, height: 60mm, 2pcs, fits: JEEP WRANGLER III 2.8 CRD/3.6 V6/3.8/4.0 L6 242CID 01.06-

View part

DEUTER Spring washer DEUKPLPSJW2T

Spring washer rear, height: 50mm, 2pcs, fits: JEEP WRANGLER III 2.8 CRD/3.6 V6/3.8/4.0 L6 242CID 01.06-

View part

DEUTER Suspension sleeve DEUKPLPU31/75/24

Suspension sleeves, 2pcs, fitting position: front, set/stabilizer, Bottom, hardness: 75 Sha fits: JAGUAR XJ SUZUKI SAMURAI, SJ410, SJ413 1.0-6.0 09.81-

View part

DEUTER Polyurethane suspension sleeve DEUKPLPU42

Polyurethane stabilizer bushing (2pcs, front/stabilizer, L/R, hardness: 75 Sha, inner diameter 29mm) fits: AUDI A4 B5, A4 B6, A4 B7, A6 ALLROAD C6, A6 C6, R8 11.94-07.15

View part

DEUTER Suspension sleeve DEUKPLPUR109

Suspension sleeves, 2pcs, fitting position: front, stabilizer, hardness: 75 Sha fits: NISSAN PATHFINDER II, PATROL GR V, TERRANO II 2.4-4.8 02.93-

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR111/18

Polyurethane stabilizer bushing (2pcs, front axle, L/R, inside, hardness: 75 Sha, inner diameter 18mm) fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY III, LEGACY OUTBACK 05.89-06.09

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR111/19

Polyurethane stabilizer bushing (2pcs, front axle, L/R, inside, hardness: 75 Sha, inner diameter 18mm) fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY III, LEGACY OUTBACK 05.89-06.09

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/22

Polyurethane stabilizer bushing (2pcs, front, L/R, inside, hardness: 75 Sha, inner diameter 22mm) fits: BMW 3 (E46) 09.00-02.05

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/22,5

Polyurethane stabilizer bushing, 2pcs, front, L/R, inside, hardness: 75 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/23

Polyurethane stabilizer bushing (2pcs, front, L/R, inside, hardness: 75 Sha, inner diameter 23mm) fits: BMW 3 (E46), 5 (E39), Z4 (E85) 09.95-02.09

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/23,5

Polyurethane stabilizer bushing, 2pcs, front, L/R, inside, hardness: 75 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/24

Polyurethane stabilizer bushing (2pcs, front, L/R, inside, hardness: 75 Sha, inner diameter 24mm) fits: BMW 3 (E46), 5 (E39), Z4 (E85) 09.95-02.09

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/25

Polyurethane stabilizer bushing (2pcs, front, L/R, inside, hardness: 75 Sha, inner diameter 25mm) fits: BMW 3 (E46), 5 (E39), Z4 (E85) 09.95-02.09

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR115/85/21

Suspension sleeve fits: HYUNDAI ACCENT IV, CRETA, ELANTRA IV, ELANTRA V, I20 I, I30, I40 I, I40 I CW, IX20, IX35, KONA, SOLARIS, TUCSON, VELOSTER KIA CARENS III, CARENS IV, CEE'D, CEED 05.06-

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR124

Polyurethane stabilizer bushing, 2pcs, front, L/R, inside, hardness: 75 Sha, fits: RENAULT ESPACE IV 1.9D-3.5 11.02-12.15

View part

DEUTER Suspension sleeve DEUKPLPUR149

Polyurethane Track control arm bushings

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR152

Polyurethane stabilizer bushing (2pcs, front axle, inside, hardness: 75 Sha, inner diameter 18mm) fits: AUDI A3, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I 09.96-12.13

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR152/19

Polyurethane stabilizer bushing (2pcs, front axle, L/R, inside, hardness: 75 Sha, inner diameter 19mm) fits: AUDI A3, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA 09.96-12.13

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR152/20

Polyurethane stabilizer bushing (2pcs, front axle, inside, hardness: 75 Sha, inner diameter 20mm) fits: AUDI A3, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I 09.96-12.13

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR152/21

Polyurethane stabilizer bushing (2pcs, front axle, inside, hardness: 75 Sha, inner diameter 21mm) fits: AUDI A3, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I 09.96-12.13

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR152/23

Polyurethane stabilizer bushing (2pcs, front axle, inside, hardness: 75 Sha, inner diameter 23mm) fits: AUDI A3, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I 09.96-12.13

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR184/21

Rear stabilizer bar bushing 21mm (+ silicone fitting grease, for stabilizer, R, rear axle, hardness: 90 Sha, inner diameter 21mm) fits: KIA PICANTO I 04.04-09.11

View part

DEUTER Polyurethane suspension sleeve DEUKPLPUR201

Polyurethane stabilizer bushing (2pcs, rear, hardness: 75 Sha, inner diameter 12mm) fits: BMW 3 (E30), 3 (E36) 09.82-08.00

View part

DEUTER Suspension sleeve DEUKPLPUR31SS/24

Suspension sleeves L/R, 2pcs, fitting position: front, stabilizer, hardness: 75 Sha fits: JAGUAR XJ 2.9-6.0 10.86-09.97

View part

DEUTER Suspension sleeve DEULRDKPL2

Suspension sleeves, 1pcs, fitting position: front/rear fits: LAND ROVER DISCOVERY II 2.5D/4.0 11.98-06.04

View part

DEUTER Suspension sleeve DEULRDKPL3

Suspension sleeves, 1pcs, fitting position: front/rear fits: LAND ROVER DISCOVERY III 2.7D/4.0/4.4 07.04-09.09

View part

DEUTER Suspension sleeve DEULRFKPL1

Suspension sleeves, 1pcs, fitting position: front/rear fits: LAND ROVER FREELANDER I 1.8/2.0D/2.5 02.98-10.06

View part

DEUTER Suspension sleeve DEULRKPL1

Suspension sleeves, 1pcs, fitting position: front/rear fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 2.0-4.3 07.70-02.16

View part

DEUTER Polyurethane suspension sleeve DEULTKPL4

Poliuretanowe tuleje wahacza przedniego dolnego przedniego - Lancia Thesis - 2szt.

View part

DEUTER Suspension sleeve DEUMGKPL1

Suspension sleeves, 1pcs, fitting position: front/rear fits: MERCEDES G (W461), G (W463) 2.3-5.5 09.89-

View part

DEUTER Suspension sleeve DEUMGKPL2

Suspension sleeves L/R, 22pcs, fitting position: front/rear, set, hardness: 75 Sha fits: MERCEDES G (W460), G (W461), G (W463) 2.3-6.0 03.79-

View part

DEUTER Suspension sleeve DEUMGKPL2/75/40/47/32/

Suspension sleeves L/R, 22pcs, fitting position: front/rear, set, hardness: 75 Sha fits: MERCEDES G (W460), G (W461), G (W463) 2.3-6.0 03.79-

View part

DEUTER Suspension sleeve DEUMGKPL2/85/40/47/30/

Suspension sleeves L/R, 22pcs, fitting position: front/rear, set, hardness: 85 Sha fits: MERCEDES G (W460), G (W461), G (W463) 2.3-6.0 03.79-

View part

DEUTER Suspension sleeve DEUMGKPLPS1

Suspension sleeves, 4pcs, fitting position: front/rear, spring, hardness: 90 Sha (rises to 40mm) fits: MERCEDES G (W460) 2.3-3.0D 03.79-07.93

View part

DEUTER Polyurethane suspension sleeve DEUMGKPLT2

Polyurethane suspension bushings set (28pcs, + silicone fitting grease, front/rear, L/R, hardness: 75 Sha) fits: MITSUBISHI GALANT VIII 08.96-

View part

DEUTER Polyurethane suspension sleeve DEUMLEXKPL5

Polyurethane suspension sleeve (2pcs, rear bottom transverse swingarm, L/R, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15

View part

DEUTER Polyurethane suspension sleeve DEUMLEXKPL6

Polyurethane suspension sleeve (2pcs, rear top swingarm, L/R, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15

View part

DEUTER Polyurethane suspension sleeve DEUMLEXKPL7

Polyurethane suspension sleeve (2pcs, front swingarm, hardness: 75 Sha) fits: MITSUBISHI LANCER VIII 06.08-12.15

View part

DEUTER Suspension sleeve DEUMML500KPL2

Suspension sleeves, 20pcs, fitting position: rear, set, hardness: 75 Sha/85 Sha fits: MERCEDES GL (X164), M (W163), M (W164), R (W251, V251) 2.3-6.2 02.98-12.14

View part

DEUTER Polyurethane suspension sleeve DEUMMX5KPL1

Polyurethane bushings set (L/R) fits: MAZDA MX-5 I, MX-5 II 05.90-10.05

View part

DEUTER Polyurethane suspension sleeve DEUMMX5KPL5

Polyurethane bushings set (14pcs, rear, L/R, hardness: 85 Sha) fits: MAZDA MX-5 III 03.05-12.14

View part

DEUTER Polyurethane suspension sleeve DEUMMX5KPL6/85

Polyurethane bushings set (26pcs, L/R, front/rear, hardness: 85 Sha) fits: MAZDA MX-5 III 03.05-12.14

View part

DEUTER Suspension sleeve DEUMP1KPL1

Suspension sleeves, fitting position: front/rear, set (to differ 60mm) fits: HYUNDAI GALLOPER I, GALLOPER II MITSUBISHI PAJERO I 2.3D-3.0 12.82-

View part

DEUTER Suspension sleeve DEUMP1KPL1/65

Suspension sleeves, fitting position: front/rear, set (to differ 65mm) fits: HYUNDAI GALLOPER I, GALLOPER II MITSUBISHI PAJERO I 2.3D-3.0 12.82-

View part

DEUTER Suspension sleeve DEUMP2KPL2

Suspension sleeves L/R, fitting position: front/rear fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-

View part

DEUTER Suspension sleeve DEUMP2KPL2/26/26/65

Suspension sleeves, fitting position: front/rear, set fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-

View part

DEUTER Suspension sleeve DEUMP2KPL2/27/18/60

Suspension sleeves, fitting position: front/rear, set fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-

View part

Buying with Partios

Buying DEUTER parts through Partios

Are these genuine DEUTER parts?

Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source DEUTER parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.

Do you supply DEUTER parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on DEUTER parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a DEUTER order?

It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for DEUTER parts?

No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account