Partios Wholesale catalogue

Deuter Supplier | Suspension & Steering

Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)

451 current catalogue lines

About the DEUTER range

Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.

Catalogue products

Vehicle references are indicative — confirm against the article number.

DEUTER Polyurethane suspension sleeve DEUHCKPL3/75/18/15/32

Polyurethane suspension bushings set (40pcs, front/rear, L/R, hardness: 75 Sha) fits: HONDA CIVIC IV, CRX II 09.87-02.95

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL3/85/19/14/32

Polyurethane suspension bushings set (40pcs, front/rear, L/R, hardness: 85 Sha) fits: HONDA CIVIC IV, CRX II 09.87-02.95

View part

DEUTER Polyurethane suspension sleeve DEUHFRVKPL2

Polyurethane suspension bushings set (12pcs, rear axle, hardness: 75 Sha/85 Sha) fits: HONDA FR-V 08.04-12.09

View part

DEUTER Polyurethane suspension sleeve DEUHYCKPL4

Polyurethane suspension bushings set (12pcs, rear swingarm, L/R, hardness: 75 Sha/85 Sha) fits: HYUNDAI COUPE II 01.01-08.09

View part

DEUTER Suspension sleeve DEUJCHWJKPL1

Suspension sleeves, 1pcs, fitting position: front/rear fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05

View part

DEUTER Suspension sleeve DEUJCHWKKPL1

Suspension sleeves, 32pcs, fitting position: front/rear, set, hardness: 75 Sha fits: JEEP GRAND CHEROKEE WK/WH

View part

DEUTER Suspension sleeve DEUJCHWKKPL2

Suspension sleeves, 16pcs, fitting position: rear, set, hardness: 75 Sha fits: JEEP GRAND CHEROKEE III 3.0D-6.1 10.04-12.10

View part

DEUTER Suspension sleeve DEUJCHWKKPL3

Suspension sleeves, 16pcs, fitting position: front, set, hardness: 75 Sha fits: JEEP GRAND CHEROKEE III 3.0D-6.1 10.04-12.10

View part

DEUTER Suspension sleeve DEUJCHXJKPL1

Suspension sleeves L/R, 1pcs, fitting position: front/rear, hardness: 75 Sha/85 Sha (set) fits: JEEP CHEROKEE 2.1D-4.0 10.84-09.01

View part

DEUTER Suspension sleeve DEUJCHXJLIFT

Suspension sleeves, 1pcs, fitting position: front fits: JEEP CHEROKEE 2.1D-4.0 10.84-09.01

View part

DEUTER Suspension sleeve DEUJGCHZJKPL1

Suspension sleeves, 1pcs, fitting position: front/rear, set, Bottom/Top, hardness: 75 Sha fits: JEEP GRAND CHEROKEE I 2.5D-5.9 09.91-04.99

View part

DEUTER Suspension sleeve DEUJWJKKPL1

Suspension sleeves, 28pcs, fitting position: front/rear, hardness: 75 Sha (set) fits: JEEP WRANGLER III 2.8D-4.0 01.06-

View part

DEUTER Suspension sleeve DEUJWJKKPL4

Suspension sleeves, 2pcs, fitting position: front, Panhard rod, hardness: 85 Sha fits: JEEP WRANGLER III 2.8D-4.0 01.06-

View part

DEUTER Suspension sleeve DEUJWJKKPL5

Suspension sleeves, 2pcs, fitting position: rear, Panhard rod, hardness: 85 Sha fits: JEEP WRANGLER III 2.8D-4.0 01.06-

View part

DEUTER Suspension sleeve DEUJWTJKPL1

Suspension sleeves, 19pcs, fitting position: front/rear, hardness: 75 Sha (set) fits: JEEP WRANGLER II 2.4/2.5/4.0 08.96-04.07

View part

DEUTER Polyurethane suspension sleeve DEUKPL1021/75/22

Polyurethane stabilizer bushing (2pcs, front axle, L/R, inside, hardness: 75 Sha, inner diameter 22/24mm) fits: OPEL ZAFIRA A 04.99-06.05

View part

DEUTER Polyurethane suspension sleeve DEUKPL1021/75/23

Polyurethane stabilizer bushing (2pcs, front axle, L/R, inside, hardness: 75 Sha, inner diameter 22/24mm) fits: OPEL ZAFIRA A 04.99-06.05

View part

DEUTER Polyurethane suspension sleeve DEUKPL1050

Polyurethane stabilizer bushing (2pcs, front axle, L/R, hardness: 85 Sha, inner diameter 17mm) fits: PEUGEOT 206, 206+ 08.98-

View part

DEUTER Polyurethane suspension sleeve DEUKPL1091/85

Polyurethane stabilizer bushing (2pcs, front axle, L/R, inside, hardness: 85 Sha, inner diameter 31mm) fits: AUDI A8 D3 10.02-07.10

View part

DEUTER Polyurethane suspension sleeve DEUKPL1127

Polyurethane stabilizer bushing (2pcs, front stabilizer, L/R, inside, inner diameter 35mm) fits: VW PHAETON 04.02-03.16

View part

DEUTER Polyurethane suspension sleeve DEUKPL1202

Polyurethane stabilizer bushing, 2pcs, stabilizer, rear,

View part

DEUTER Polyurethane suspension sleeve DEUKPL1217

Poliuretanowa tuleja drążka stabilizatora tylnego - FORD FOCUS II - 2szt.

View part

DEUTER Polyurethane suspension sleeve DEUKPL1225P/75/21

Suspension sleeve,

View part

DEUTER Polyurethane suspension sleeve DEUKPL1225T/75/17

Polyurethane stabilizer bushing (2pcs, rear, L/R, inside, hardness: 75 Sha, inner diameter 17mm) fits: HYUNDAI COUPE I 03.01-04.02

View part

DEUTER Polyurethane suspension sleeve DEUKPL1252

Polyurethane bushing (2pcs, rear differential gear, L/R, rear, hardness: 75 Sha, inner diameter 12mm, outer diameter 58mm) fits: AUDI A4 B6, A4 B7, A6 C6 11.00-08.11

View part

DEUTER Polyurethane suspension sleeve DEUKPL1297/85

Polyurethane stabilizer bushing (2pcs, front/stabilizer, L/R, inside, hardness: 85 Sha, inner diameter 24mm) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

DEUTER Polyurethane suspension sleeve DEUKPL1311

Polyurethane stabilizer bushing (2pcs, + silicone fitting grease, front stabilizer, L/R, hardness: 75 Sha, inner diameter 24,6mm) fits: BMW 5 (E60), 5 (E61), 6 (E64) 12.01-12.10

View part

DEUTER Polyurethane suspension sleeve DEUKPL133

Polyurethane suspension sleeve (2pcs, + silicone fitting grease, rear bottom, bottom, hardness: 75 Sha) fits: BMW 3 (E36), 3 (E46) 09.90-05.05

View part

DEUTER Polyurethane suspension sleeve DEUKPL133/85SHA

Polyurethane suspension sleeve (2pcs, + silicone fitting grease, rear bottom, bottom, hardness: 85 Sha) fits: BMW 3 (E36), 3 (E46) 09.90-05.05

View part

DEUTER Polyurethane suspension sleeve DEUKPL134

Polyurethane suspension sleeve (2pcs, rear top transverse swingarm, top, hardness: 75 Sha) fits: BMW 3 (E36), 3 (E46) 09.90-12.07

View part

DEUTER Polyurethane suspension sleeve DEUKPL1357

Polyurethane stabilizer bushing (2pcs, front axle, L/R, hardness: 75 Sha, inner diameter 20/22mm) fits: CITROEN C3 II, C4 CACTUS, DS3 PEUGEOT 208 I 09.09-

View part

DEUTER Polyurethane suspension sleeve DEUKPL136

Polyurethane suspension sleeve (2pcs, + silicone fitting grease, body/swingarm, L/R, for body, hardness: 75 Sha) fits: BMW 3 (E36), 3 (E46) 09.90-07.05

View part

DEUTER Stabilizer silent block DEUKPL1367

Stabilizer silentblock front (17mm) fits: FIAT CINQUECENTO, SEICENTO / 600 0.7-Electric 07.91-01.10

View part

DEUTER Suspension sleeve DEUKPL1372

Suspension sleeves, 2pcs, fitting position: rear, stabilizer fits: TOYOTA LAND CRUISER 90 2.7/3.0D/3.4 06.95-12.02

View part

DEUTER Polyurethane suspension sleeve DEUKPL1384

Polyurethane bushings set (4pcs, top front swingarm, L/R, front/rear, hardness: 75 Sha) fits: AUDI A4 B5, A4 B6, A6 C5, A8 D2 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 03.94-03.08

View part

DEUTER Suspension sleeve DEUKPL1394

Suspension sleeves L/R, 4pcs, fitting position: front, set fits: JEEP LIBERTY 2.4-3.7 01.01-08.07

View part

DEUTER Polyurethane suspension sleeve DEUKPL1426/85

Polyurethane stabilizer bushing (2pcs, rear axle, L/R, hardness: 85 Sha, inner diameter 20mm) fits: NISSAN 350Z 09.02-12.08

View part

DEUTER Polyurethane suspension sleeve DEUKPL1426/90

Polyurethane stabilizer bushing (2pcs, rear axle, L/R, hardness: 90 Sha, inner diameter 20mm) fits: NISSAN 350Z 09.02-12.08

View part

DEUTER Polyurethane suspension sleeve DEUKPL1428

Polyurethane suspension sleeve (4pcs, 4WD vehicles, rear trolley, L/R, hardness: 85 Sha, outer diameter 42mm) fits: SUBARU FORESTER, IMPREZA 08.92-06.09

View part

DEUTER Polyurethane suspension sleeve DEUKPL1455/85

Polyurethane stabilizer bushing (2pcs, front axle, L/R, hardness: 85 Sha, inner diameter 33mm) fits: NISSAN 350Z 09.02-12.08

View part

DEUTER Polyurethane suspension sleeve DEUKPL1455/90

Polyurethane stabilizer bushing (2pcs, front axle, L/R, hardness: 90 Sha, inner diameter 33mm) fits: NISSAN 350Z 09.02-12.08

View part

DEUTER Polyurethane suspension sleeve DEUKPL1485/75/17

Polyurethane stabilizer bushing (2pcs, rear, L/R, hardness: 75 Sha, inner diameter 17mm) fits: FORD GALAXY II, GALAXY MK II, KUGA II, MONDEO IV, S-MAX 05.06-12.19

View part

DEUTER Polyurethane suspension sleeve DEUKPL1485/75/21

Polyurethane stabilizer bushing (2pcs, rear, L/R, hardness: 75 Sha, inner diameter 17mm) fits: FORD GALAXY II, GALAXY MK II, KUGA II, MONDEO IV, S-MAX 05.06-12.19

View part

DEUTER Polyurethane suspension sleeve DEUKPL1485/85/17

Polyurethane stabilizer bushing (2pcs, rear, L/R, hardness: 85 Sha, inner diameter 17mm) fits: FORD GALAXY II, GALAXY MK II, KUGA II, MONDEO IV, S-MAX 05.06-12.19

View part

DEUTER Polyurethane suspension sleeve DEUKPL1485/85/21

Polyurethane stabilizer bushing (2pcs, rear, L/R, hardness: 85 Sha, inner diameter 17mm) fits: FORD GALAXY II, GALAXY MK II, KUGA II, MONDEO IV, S-MAX 05.06-12.19

View part

DEUTER Polyurethane suspension sleeve DEUKPL1486

Polyurethane stabilizer bushing (2pcs, L/R, front axle, hardness: 85 Sha, inner diameter 25mm) fits: NISSAN X-TRAIL I 06.01-01.13

View part

DEUTER Polyurethane suspension sleeve DEUKPL1582/75

Stabilizer bar bushings (4pcs, L/R, hardness: 75 Sha, inner diameter 12mm, outer diameter 30mm) fits: MERCEDES G SAMOCHÓD TERENOWY ZAMKNIĘTY (W464), G (W460), G (W461), G (W463), G (W464) 09.63-

View part

DEUTER Polyurethane suspension sleeve DEUKPL159

Polyurethane bushings set (2pcs, rear differential gear, L/R, hardness: 75 Sha, inner diameter 14,5mm, outer diameter 50mm) fits: BMW 3 (E36) 09.90-11.99

View part

Buying with Partios

Buying DEUTER parts through Partios

Are these genuine DEUTER parts?

Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source DEUTER parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.

Do you supply DEUTER parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on DEUTER parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a DEUTER order?

It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for DEUTER parts?

No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account