Partios Wholesale catalogue
Deuter Supplier | Suspension & Steering
Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)
451 current catalogue lines
About the DEUTER range
Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.
Catalogue products
Vehicle references are indicative — confirm against the article number.
DEUTER Polyurethane suspension sleeve DEUKPL159/435
Polyurethane bushings set (3pcs, + silicone fitting grease, rear differential gear, hardness: 75 Sha) fits: BMW 3 (E36) 09.90-05.99
View partDEUTER Polyurethane suspension sleeve DEUKPL1610/1611
Polyurethane bushings set (3pcs, rear differential gear, L/R, front/rear, hardness: 85 Sha) fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64) 12.01-12.10
View partDEUTER Polyurethane suspension sleeve DEUKPL1612
Polyurethane stabilizer bushing (2pcs, rear axle, L/R, inside, hardness: 85 Sha, inner diameter 21mm) fits: HYUNDAI GENESIS 01.11-12.14
View partDEUTER Polyurethane suspension sleeve DEUKPL1619/75/21
Polyurethane stabilizer bushing (2pcs, front, L/R, inside, hardness: 75 Sha, inner diameter 21mm) fits: MAZDA MX-5 III 03.05-12.14
View partDEUTER Polyurethane suspension sleeve DEUKPL1619/75/26.5
Polyurethane stabilizer bushing (2pcs, front, L/R, inside, hardness: 75 Sha, inner diameter 26mm) fits: MAZDA RX-8 08.03-06.12
View partDEUTER Polyurethane suspension sleeve DEUKPL1676
Polyurethane bushing, hardness: 90 Sha, quantity per set: 2pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partDEUTER Polyurethane suspension sleeve DEUKPL1689
Polyurethane spring washer (2pcs, rear axle, L/R, bottom, hardness: 90 Sha) fits: AUDI A4 B6, A4 B7 11.00-06.08
View partDEUTER Suspension sleeve DEUKPL217P
Suspension sleeves L/R, 4pcs, fitting position: front, set/stabilizer bar link, Bottom/Top, hardness: 75 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05
View partDEUTER Suspension sleeve DEUKPL217T
Suspension sleeves L/R, 4pcs, fitting position: rear, set/stabilizer bar link, Bottom/Top, hardness: 75 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05
View partDEUTER Suspension sleeve DEUKPL238
Suspension sleeves L/R, 2pcs, fitting position: rear, stabilizer, hardness: 75 Sha fits: JEEP GRAND CHEROKEE I, GRAND CHEROKEE II 2.5D-5.9 09.91-09.05
View partDEUTER Suspension sleeve DEUKPL239A
Suspension sleeves L/R, 2pcs, fitting position: front/top, shock absorber, hardness: 75 Sha fits: JEEP CHEROKEE, COMANCHE, GRAND CHEROKEE I MITSUBISHI PAJERO II 2.1D-5.9 10.84-
View partDEUTER Polyurethane suspension sleeve DEUKPL261
Polyurethane stabilizer bushing (4pcs, + silicone fitting grease, rear stabilizer, L/R, hardness: 75 Sha) fits: BMW 3 (E46) 12.97-07.05
View partDEUTER Suspension sleeve DEUKPL300
Suspension sleeves L/R, 2pcs, fitting position: front fits: NISSAN PATROL GR IV, PATROL GR V TOYOTA LAND CRUISER, LAND CRUISER 80 2.4-4.8 11.84-
View partDEUTER Polyurethane suspension sleeve DEUKPL313
Polyurethane pad (2pcs, gearbox, L/R) fits: BMW 3 (E30), 3 (E46) 09.82-03.03
View partDEUTER Polyurethane suspension sleeve DEUKPL314
Polyurethane engine pad (2pcs, L/R, hardness: 75 Sha) fits: BMW 3 (E30) 09.82-01.92
View partDEUTER Polyurethane suspension sleeve DEUKPL317
Polyurethane bushings set, 2pcs, engine, L/R, hardness: 75 Sha,
View partDEUTER Polyurethane suspension sleeve DEUKPL322
Polyurethane bushings set, 2pcs, engine, L/R, hardness: 75 Sha,
View partDEUTER Suspension sleeve DEUKPL33
Suspension sleeves L/R, 2pcs, fitting position: front/rear, swingarm, In the back/In the front, hardness: 75 Sha fits: MERCEDES G (W460), G (W461), G (W463) 2.3-6.0 03.79-
View partDEUTER Suspension sleeve DEUKPL36/38
Suspension sleeves, 24pcs, fitting position: front/rear, leaf spring/set, hardness: 75 Sha fits: TOYOTA LAND CRUISER 2.4-4.2D 03.69-
View partDEUTER Polyurethane suspension sleeve DEUKPL367/P367
Polyurethane stabilizer bushing (4pcs, stabilizer bar link, L/R, front axle, hardness: 75 Sha) fits: AUDI A3, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I 09.96-12.13
View partDEUTER Polyurethane suspension sleeve DEUKPL377
Poliuretanowa tuleja łącznika stabilizatora HONDA CIVIC / CRX / Acura/ Rover-4szt.
View partDEUTER Polyurethane suspension sleeve DEUKPL411
Polyurethane suspension sleeve (2pcs, front/shock absorber mounting, L/R, hardness: 75 Sha) fits: VW GOLF III, VENTO 10.91-04.99
View partDEUTER Polyurethane suspension sleeve DEUKPL411 85
Polyurethane suspension sleeve (2pcs, front/shock absorber mounting, L/R, hardness: 85 Sha) fits: VW GOLF III 08.91-04.99
View partDEUTER Polyurethane suspension sleeve DEUKPL411 90
Polyurethane suspension sleeve (2pcs, + silicone fitting grease, front/shock absorber mounting, L/R, hardness: 90 Sha) fits: VW GOLF III 08.91-04.99
View partDEUTER Polyurethane suspension sleeve DEUKPL493
Polyurethane suspension sleeve (2pcs, control rod/front, hardness: 75 Sha) fits: HONDA CIVIC IV, CRX II 09.87-02.95
View partDEUTER Suspension sleeve DEUKPL532
Suspension sleeves, 2pcs, fitting position: front, swingarm, hardness: 75 Sha (centric) fits: NISSAN PATROL GR IV, PATROL GR V TOYOTA LAND CRUISER 2.4-4.8 11.84-
View partDEUTER Polyurethane suspension sleeve DEUKPL673
Poliuretanowe tuleje stabilizatora przedniego LANCIA THESIS fi 22mm-kpl. 2szt.
View partDEUTER Polyurethane suspension sleeve DEUKPL680
Polyurethane stabilizer bushing (2pcs, rear/stabilizer, L/R, hardness: 75 Sha, inner diameter 22mm) fits: AUDI A3, A4 B5, A4 B6, A6 C4, A6 C5, TT 06.94-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/10
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/12
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/14
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/15
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/16
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/18
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL680/20
Polyurethane stabilizer bushing (2pcs, rear stabilizer, L/R, inside, hardness: 75 Sha, inner diameter 10mm) fits: AUDI 80 B4, A3, A4 B5, A6 C5, TT SEAT LEON, TOLEDO II SKODA OCTAVIA I 09.91-06.06
View partDEUTER Polyurethane suspension sleeve DEUKPL743AB
Polyurethane stabilizer bushing (4pcs, front, L/R, hardness: 75 Sha) fits: LADA 1200-1600, NIVA 01.70-
View partDEUTER Polyurethane suspension sleeve DEUKPL76
Polyurethane suspension sleeve (2pcs, front swingarm, L/R, hardness: 75 Sha) fits: BMW 3 (E30), 3 (E36) 09.82-05.99
View partDEUTER Polyurethane suspension sleeve DEUKPL786T/19
Polyurethane stabilizer bushing (2pcs, rear axle, L/R, inside, hardness: 75 Sha, inner diameter 19mm) fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV, OUTBACK, XV 10.98-12.17
View partDEUTER Polyurethane suspension sleeve DEUKPL831
Tuleje poliuretanowe stabilizatora tylnego - VW / SEAT / SKODA - 2 szt.
View partDEUTER Polyurethane suspension sleeve DEUKPL837
Polyurethane stabilizer bushing (2pcs, front stabilizer, L/R, hardness: 75 Sha, inner diameter 19mm) fits: OPEL ASTRA G, ASTRA G CLASSIC, CORSA C, VECTRA B SAAB 9-5 09.95-12.12
View partDEUTER Suspension sleeve DEUKPL838
Suspension sleeves L/R, 8pcs, fitting position: rear, set/swingarm, Bottom/Top, hardness: 75 Sha fits: HYUNDAI TERRACAN 2.5D/2.9D/3.5 11.01-12.06
View partDEUTER Suspension sleeve DEUKPL883
Suspension sleeves L/R, 8pcs, fitting position: front/rear, stabilizer bar link, hardness: 75 Sha fits: HYUNDAI GALLOPER I, GALLOPER II MITSUBISHI PAJERO I, PAJERO II 2.3D-3.5 12.82-
View partDEUTER Polyurethane suspension sleeve DEUKPLP100/101
Komplet poliuretanowych tulei wahacza przedniego - Daewoo Nubira I / II - 4szt.
View partDEUTER Suspension sleeve DEUKPLP1039C1
Suspension sleeves L/R, 2pcs, fitting position: front, Top, hardness: 85 Sha fits: TOYOTA LAND CRUISER PRADO 3.0D/4.0 09.02-12.10
View partDEUTER Polyurethane suspension sleeve DEUKPLP105/106
Polyurethane suspension sleeve (2pcs, + silicone fitting grease, rear double swingarm, L/R, hardness: 75 Sha) fits: BMW 5 (E39) 09.95-05.04
View partDEUTER Polyurethane suspension sleeve DEUKPLP1072/85
Polyurethane bushings set (2pcs, Cosworth version, for stabilizer, L/R, front axle, hardness: 85 Sha) fits: FORD SCORPIO I, SIERRA II 10.85-09.94
View partDEUTER Suspension sleeve DEUKPLP1095
Suspension sleeves, 8pcs, fitting position: front/rear, body separators/set fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-
View partDEUTER Suspension sleeve DEUKPLP1095/30
Suspension sleeves, 8pcs, fitting position: front/rear, body separators/set fits: MITSUBISHI PAJERO II
View partBuying with Partios
Buying DEUTER parts through Partios
Are these genuine DEUTER parts?
- Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source DEUTER parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.
Do you supply DEUTER parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on DEUTER parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a DEUTER order?
- It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for DEUTER parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account