Partios Wholesale catalogue

Deuter Supplier | Suspension & Steering

Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)

451 current catalogue lines

About the DEUTER range

Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.

Catalogue products

Vehicle references are indicative — confirm against the article number.

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/85/24/17/A

Polyurethane suspension bushings set (29pcs, front/rear, hardness: 85 Sha) fits: BMW 3 (E36) 09.90-11.98

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/85/24/18/A

Polyurethane suspension bushings set, hardness: 85 Sha, quantity per set: 29pcs fits: BMW 3 (E36) 09.90-11.98

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/85/25/15/A

Polyurethane suspension bushings set, 29pcs, front/rear, hardness: 85 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/85/29/22/A

Polyurethane suspension bushings set (29pcs, front/rear, hardness: 85 Sha) fits: BMW 3 (E36) 09.90-11.98

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/90/25/15/A

Polyurethane suspension bushings set, 29pcs, front/rear, hardness: 90 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/90/26/17/C

Polyurethane suspension bushings set (29pcs, front/rear, hardness: 90 Sha) fits: BMW 3 (E36) 09.90-11.98

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/90/26/18/A

Polyurethane suspension bushings set, 29pcs, front/rear, hardness: 90 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3

Polyurethane suspension bushings set (27pcs, + silicone fitting grease, front/rear, L/R, hardness: 75 Sha) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66/22/14

Polyurethane suspension bushings set, 27pcs, front/rear, L/R, hardness: 75 Sha, centric

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66/22,5/18

Polyurethane suspension bushings set, hardness: 75 Sha, quantity per set: 27pcs, centric fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66/23/18

Polyurethane suspension bushings set (27pcs, front/rear, L/R, inner diameter 66mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66/24/19

Polyurethane suspension bushings set, 27pcs, front/rear, L/R,

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66A/21/15

Polyurethane bushings set, hardness: 75 Sha, quantity per set: 27pcs, acentric fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66A/24/18

Polyurethane bushings set (27pcs, acentric, front/rear, L/R, hardness: 85 Sha, inner diameter 66mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/66A/30/24

Polyurethane suspension bushings set (27pcs, acentric, front/rear, L/R, hardness: 90 Sha, inner diameter 66mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/85/60/23/20

Polyurethane suspension bushings set (27pcs, centric, front/rear, L/R, hardness: 85 Sha, inner diameter 60mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/85/66/24/18

Polyurethane suspension bushings set (27pcs, centric, front/rear, L/R, hardness: 85 Sha, inner diameter 66mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/90/66/26/20

Polyurethane suspension bushings set (27pcs, centric, front/rear, L/R, hardness: 90 Sha, inner diameter 66mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL3/90/66C/24/1

Polyurethane suspension bushings set (27pcs, centric, front/rear, L/R, hardness: 90 Sha, inner diameter 66mm) fits: BMW 3 (E46) 12.97-05.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL7

Polyurethane suspension bushings set (18pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: BMW 5 (E34) 06.87-07.96

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL7/25/15

Polyurethane suspension bushings set (18pcs, front/rear, hardness: 75 Sha) fits: BMW 5 (E34) 06.87-07.96

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL7/85/23/15

Polyurethane suspension bushings set (18pcs, L/R, hardness: 85 Sha) fits: BMW 5 (E34) 06.87-07.96

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL7/90/23/16

Polyurethane suspension bushings set (18pcs, front/rear, hardness: 90 Sha) fits: BMW 5 (E34) 06.87-07.96

View part

DEUTER Suspension sleeve DEUDASV1

Suspension sleeves, 2pcs, fitting position: front (KIT IS REQUIRED WHEN USING SPRING WASHERS WITH HEIGHT 50MM) fits: SUZUKI VITARA

View part

DEUTER Polyurethane suspension sleeve DEUDDKPL2/12

Polyurethane suspension bushings set (14pcs, rear axle, L/R) fits: DACIA DUSTER 06.10-01.18

View part

DEUTER Polyurethane suspension sleeve DEUDDKPL2/14

Polyurethane suspension bushings set (14pcs, rear axle, L/R) fits: DACIA DUSTER 06.10-01.18

View part

DEUTER Suspension sleeve DEUDDSV

Front axle lowering set, 3pcs, fitting position: front fits: SUZUKI VITARA

View part

DEUTER Suspension sleeve DEUDRKPL1

Suspension sleeves, 16pcs, set, In the back/In the front, hardness: 75 Sha fits: DAIHATSU ROCKY 2.0/2.8D 02.85-12.98

View part

DEUTER Other elements of drive transmission DEUDWSSVJ

Drive shaft spacer fits: SUZUKI JIMNY, SAMURAI, VITARA 1.0-2.5 45-160 04.88-

View part

DEUTER Other suspension elements DEUDWSV1

View part

DEUTER Polyurethane suspension sleeve DEUEVO789

Polyurethane suspension bushings set (18pcs, front/rear, L/R, hardness: 75 Sha) fits: MITSUBISHI LANCER VII 01.01-09.07

View part

DEUTER Polyurethane suspension sleeve DEUFFMK1KPL1

Polyurethane suspension bushings set (18pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: FORD FOCUS I 10.98-03.05

View part

DEUTER Polyurethane suspension sleeve DEUFFMK1KPL3

Polyurethane suspension bushings set (4pcs, front, hardness: 75 Sha) fits: FORD FOCUS I 10.98-03.05

View part

DEUTER Polyurethane suspension sleeve DEUFMMK4KPL2

Polyurethane bushings set (14pcs, rear axle, L/R, hardness: 75 Sha) fits: FORD MONDEO IV 03.07-01.15

View part

DEUTER Polyurethane suspension sleeve DEUFSCKPL1

Polyurethane suspension bushings set (14pcs, front/rear, L/R, hardness: 75 Sha) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

DEUTER Polyurethane suspension sleeve DEUFSCKPL1-PZ

Polyurethane bushings basic set (8pcs, no stabilizer sleeve, front/rear, L/R, hardness: 75 Sha) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

DEUTER Polyurethane suspension sleeve DEUFSCKPL2

Polyurethane suspension bushings set (8pcs, L/R, rear, hardness: 75 Sha/85 Sha) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

DEUTER Polyurethane suspension sleeve DEUHC7KPL1

Polyurethane suspension bushings set fits: HONDA CIVIC VII 11.00-

View part

DEUTER Polyurethane suspension sleeve DEUHCCD 75

Polyurethane suspension sleeve (2pcs, + silicone fitting grease, swingarm, L/R, hardness: 75 Sha) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CR-V II, CRX I, CRX II, CRX III 10.83-03.07

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL1

Polyurethane suspension bushings set (38pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: HONDA CIVIC V, CRX III 10.91-12.98

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL1/75/21/13/35

Polyurethane suspension bushings set (38pcs, front/rear, L/R, hardness: 75 Sha) fits: HONDA CIVIC V, CRX III 10.91-12.98

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL1/75/23/18

Polyurethane suspension bushings set (38pcs, front/rear, hardness: 75 Sha) fits: HONDA CIVIC V, CRX III 10.91-12.98

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL1UK

Polyurethane suspension bushings set, 38pcs, L/R, bottom/top, hardness: 75 Sha, when ordering one must agree on diameter of stabilizer bar

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL2

Polyurethane suspension bushings set (36pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: HONDA CIVIC VI 11.95-02.01

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL2/75/22/15

Polyurethane suspension bushings set (36pcs, front/rear, hardness: 75 Sha) fits: HONDA CIVIC VI 11.95-02.01

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL2/85/BS

Polyurethane bushings set, hardness: 85 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL2/90/18/15

Polyurethane suspension bushings set (36pcs, front/rear, hardness: 90 Sha) fits: HONDA CIVIC VI 11.95-02.01

View part

DEUTER Polyurethane suspension sleeve DEUHCKPL3

Polyurethane suspension bushings set (40pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: HONDA CIVIC IV, CRX II 09.87-02.95

View part

Buying with Partios

Buying DEUTER parts through Partios

Are these genuine DEUTER parts?

Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source DEUTER parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.

Do you supply DEUTER parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on DEUTER parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a DEUTER order?

It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for DEUTER parts?

No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account