Partios Wholesale catalogue

Deuter Supplier | Suspension & Steering

Polyurethane suspension sleeve (280) · Suspension sleeve (146) · Other suspension elements (13) · Engine bracket (2) · Rear wishbone silent block (2) · Spring washer (2) · Front track control arm silent block (1) · Stabilizer silent block (1) · 4 further part types (4)

451 current catalogue lines

About the DEUTER range

Partios carries 451 Deuter lines, almost all suspension & steering. It has 280 of them under a single part type, polyurethane suspension sleeve. Behind it the largest groups are suspension sleeve (146), other suspension elements (13), engine bracket (2), rear wishbone silent block (2) and spring washer (2). Those six account for most of the catalogue; the remaining 6 lines are spread across 6 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes front track control arm silent block, stabilizer silent block and differential fitting elements. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 451 lines, it is a targeted range rather than a wide one.

Catalogue products

Vehicle references are indicative — confirm against the article number.

DEUTER Polyurethane suspension sleeve DEU1156

Polyurethane pad, 1pcs, front half-axle, L/R, hardness: 75 Sha,

View part

DEUTER Suspension sleeve DEU129W

Suspension sleeves L/R, 1pcs, fitting position: front, stabilizer bar link, hardness: 75 Sha fits: JEEP WRANGLER I 2.5/4.0/4.2 08.86-08.96

View part

DEUTER Polyurethane suspension sleeve DEU1329AB

Polyurethane front Swingarm bushing (1pcs, rear, L/R, bottom, hardness: 75 Sha/90 Sha) fits: FORD FOCUS C-MAX, FOCUS II 10.03-09.12

View part

DEUTER Polyurethane suspension sleeve DEU1716

Polyurethane buffer, 1pcs, front/swingarm, hardness: 85 Sha,

View part

DEUTER Polyurethane suspension sleeve DEU186/84

Polyurethane suspension sleeve (1pcs, front, hardness: 75 Sha, inner diameter 37mm) fits: AUDI 80 B3, 80 B4 09.86-

View part

DEUTER Polyurethane suspension sleeve DEU186/84M

Polyurethane suspension sleeve (1pcs, for steel track control arm, front, hardness: 75 Sha, outer diameter 37,5mm) fits: AUDI 80 B3, 80 B4, 90 B3 09.86-

View part

DEUTER Polyurethane suspension sleeve DEU189AB

Polyurethane suspension sleeve (4pcs, + silicone fitting grease, rear, L/R, hardness: 75 Sha) fits: BMW 3 (E46), X3 (E83) 12.97-12.11

View part

DEUTER Polyurethane suspension sleeve DEU189AB/90SHA

Polyurethane suspension sleeve (4pcs, rear, hardness: 90 Sha) fits: BMW 3 (E46), X3 (E83) 12.97-12.11

View part

DEUTER Suspension sleeve DEU263

Suspension sleeves, 1pcs, fitting position: front fits: LAND ROVER DEFENDER, DISCOVERY II 2.2D-4.0 08.90-02.16

View part

DEUTER Suspension sleeve DEU263A

Suspension sleeves, 1pcs, fitting position: front fits: LAND ROVER DEFENDER, DISCOVERY I 2.0-4.0 06.89-02.16

View part

DEUTER Suspension sleeve DEU264

Suspension sleeves, 1pcs, fitting position: front, swingarm (acentric) fits: LAND ROVER DEFENDER, DISCOVERY I, DISCOVERY II 2.0-4.0 06.89-02.16

View part

DEUTER Suspension sleeve DEU271

Suspension sleeves, 1pcs, fitting position: front fits: LAND ROVER DEFENDER, DISCOVERY I 2.0-4.0 06.89-02.16

View part

DEUTER Suspension sleeve DEU281

Suspension sleeves, 1pcs, fitting position: rear fits: LAND ROVER FREELANDER I 1.8/2.0D/2.5 02.98-10.06

View part

DEUTER Polyurethane suspension sleeve DEU312

Polyurethane gearshift pad (1pcs, rear, L/R, hardness: 75 Sha, outer diameter 39/50mm) fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E28), 5 (E34), 5 (E39), 6 (E24), 7 (E23), 7 (E32), 7 (E38) 05.77-06.03

View part

DEUTER Engine bracket DEU322

Polyurethane engine pad 1 pcs, left/right, front, 75 Sha, fits: BMW 3 (E36), Z3 (E36) 1.6-1.9 09.90-01.03

View part

DEUTER Polyurethane suspension sleeve DEU334

Polyurethane front Swingarm bushing (1pcs, rear, L/R, bottom, hardness: 75 Sha) fits: SEAT ALTEA, ALTEA XL, CORDOBA, IBIZA III, LEON, TOLEDO III SKODA FABIA I, FABIA I PRAKTIK, FABIA II 08.99-

View part

DEUTER Polyurethane suspension sleeve DEU337C

Polyurethane stabilizer bushing (1pcs, front stabilizer bar connector, hardness: 75 Sha) fits: ROVER 25 I 10.99-05.05

View part

DEUTER Polyurethane suspension sleeve DEU440

Polyurethane shock absorber bushing (2pcs, shock absorber, L/R, top, hardness: 85 Sha, inner diameter 26mm, outer diameter 83mm) fits: AUDI A1, A3, TT SEAT IBIZA IV, IBIZA IV SC 09.96-

View part

DEUTER Polyurethane suspension sleeve DEU55

Polyurethane suspension sleeve (2pcs, + silicone fitting grease, rear/rear beam, L/R, hardness: 75 Sha) fits: BMW 3 (E30) 09.82-12.91

View part

DEUTER Polyurethane suspension sleeve DEU568

Polyurethane front Swingarm bushing (1pcs, rear, L/R, bottom, hardness: 90 Sha, inner diameter 12mm, outer diameter 28/58mm) fits: NISSAN CUBE, MICRA C+C III, MICRA III, MURANO II, NOTE 01.03-

View part

DEUTER Polyurethane suspension sleeve DEU674

Polyurethane bushing (1pcs, + silicone fitting grease, gearshift lever, hardness: 75 Sha) fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E28), 5 (E34), 6 (E24), 7 (E23), 7 (E32), Z1 10.75-12.07

View part

DEUTER Polyurethane suspension sleeve DEU727/22

Polyurethane stabilizer bushing (1pcs, front, hardness: 75 Sha, inner diameter 22mm) fits: RENAULT LAGUNA, LAGUNA I, LAGUNA II, LAGUNA III 11.93-12.15

View part

DEUTER Rear wishbone silent block DEU826

Rear track control arm silent block L/R (top rear) fits: AUDI A1, A3, Q3, TT SEAT ALTEA, ALTEA XL, LEON, LEON SPORTSTOURER, TARRACO, TOLEDO III SKODA OCTAVIA I, OCTAVIA II, SUPERB II 1.2-3.6 08.00-

View part

DEUTER Polyurethane suspension sleeve DEU832/833

Polyurethane suspension sleeve (2pcs, straight track control arm, rear transverse swingarm, L/R, front/rear, hardness: 75 Sha) fits: AUDI A3, TT SEAT ALTEA, ALTEA XL, LEON, TOLEDO III 02.03-07.18

View part

DEUTER Polyurethane suspension sleeve DEU846/24

Polyurethane stabilizer bushing (1pcs, front, L/R, inside, hardness: 90 Sha, inner diameter 24mm) fits: AUDI A3 VW GOLF V 05.03-08.12

View part

DEUTER Suspension sleeve DEU89P

Suspension sleeves, 2pcs, fitting position: front fits: JEEP GRAND CHEROKEE II 2.7D-4.7 10.98-09.05

View part

DEUTER Polyurethane suspension sleeve DEU973

Polyurethane stabilizer bushing (2pcs, rear, L/R, inside, hardness: 75 Sha, inner diameter 11mm) fits: MAZDA MX-5 II, MX-5 III 05.98-12.16

View part

DEUTER Polyurethane suspension sleeve DEUA4KPL1

Polyurethane suspension bushings set (10pcs, + silicone fitting grease, front, L/R, hardness: 75 Sha) fits: AUDI A4 B5, A6 C5 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 11.94-03.08

View part

DEUTER Polyurethane suspension sleeve DEUA4KPL2

Polyurethane suspension bushings set (18pcs, + silicone fitting grease, rear, hardness: 75 Sha) fits: AUDI A4 B7 11.04-06.08

View part

DEUTER Polyurethane suspension sleeve DEUA4KPL3

Polyurethane suspension bushings set (12pcs, + silicone fitting grease, front, hardness: 75 Sha) fits: AUDI A4 B6, A4 B7 11.00-06.08

View part

DEUTER Polyurethane suspension sleeve DEUA4QB6KPL4

Polyurethane bushings set (3pcs, rear differential gear, L/R, rear axle, hardness: 75 Sha) fits: AUDI A4 B6, A4 B7, A6 C6 11.00-08.11

View part

DEUTER Polyurethane suspension sleeve DEUAB4QKPL1

Polyurethane bushings set (12pcs, rear axle, L/R, hardness: 75 Sha) fits: AUDI 80 B4, A4 B5 09.91-09.01

View part

DEUTER Polyurethane suspension sleeve DEUAB4QKPL1/85

Polyurethane bushings set (12pcs, rear axle, L/R, hardness: 85 Sha) fits: AUDI 80 B4, A4 B5 09.91-09.01

View part

DEUTER Polyurethane suspension sleeve DEUAKPL1

Polyurethane suspension sleeve (4pcs, + silicone fitting grease, cradle beam, hardness: 75 Sha) fits: AUDI 80 B4 09.91-01.96

View part

DEUTER Polyurethane suspension sleeve DEUASSVKPL4

Tuleje poliuretanowe wahacza tylnego górnego poprzecznego - AUDI / SEAT / SKODA/ VW - 2szt.

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL1

Polyurethane front Swingarm bushing (1pcs, acentric, rear, hardness: 75 Sha) fits: BMW 3 (E30) 09.82-12.91

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL10

Polyurethane suspension bushings set (19pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: BMW 3 (E30) 09.82-01.92

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL10/75/20/12/C

Polyurethane suspension bushings set (19pcs, front/rear, hardness: 75 Sha) fits: BMW 3 (E30) 09.82-01.92

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL11

Polyurethane bushings set (21pcs, rear axle, L/R, hardness: 75 Sha) fits: BMW 3 (E36) 09.90-05.99

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL12

Polyurethane suspension bushings set (13pcs, + silicone fitting grease, rear, hardness: 75 Sha) fits: BMW 3 (E30) 09.82-06.94

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL13

Polyurethane suspension bushings set (23pcs, + silicone fitting grease, rear, L/R, hardness: 75 Sha) fits: BMW 3 (E46) 12.97-07.05

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL14

Polyurethane suspension sleeve (22pcs, + silicone fitting grease, front/rear, hardness: 75 Sha) fits: BMW 7 (E38) 03.94-11.01

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL16

Polyurethane suspension sleeve (14pcs, + silicone fitting grease, rear, hardness: 75 Sha) fits: BMW 7 (E38) 03.94-11.01

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL18

Polyurethane bushings set (20pcs, front/rear, L/R, hardness: 75 Sha) fits: BMW 5 (E39) 11.96-05.04

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2

Polyurethane suspension bushings set (27pcs, + silicone fitting grease, front/rear, L/R, hardness: 75 Sha) fits: BMW 3 (E36) 09.90-11.98

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/75/24/18/C

Polyurethane suspension bushings set, 29pcs, front/rear, hardness: 75 Sha,

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/75/25/16/C

Polyurethane suspension bushings set (29pcs, front/rear, hardness: 75 Sha) fits: BMW 3 (E36) 09.90-11.98

View part

DEUTER Polyurethane suspension sleeve DEUBMWKPL2/75/25/18/C

Polyurethane suspension bushings set, 29pcs, front/rear, hardness: 75 Sha,

View part

Buying with Partios

Buying DEUTER parts through Partios

Are these genuine DEUTER parts?

Yes. Every DEUTER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source DEUTER parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DEUTER lines that aren't currently available.

Do you supply DEUTER parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on DEUTER parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a DEUTER order?

It depends on the line. Stocked DEUTER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for DEUTER parts?

No. There's no minimum order value or quantity on a Partios trade account. Some DEUTER lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account