Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

6,258 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 6,258 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 6,258 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR Stabilizer bar bushing CTRGV0605

Stabilizer bar bushing rear L/R fits: HYUNDAI COUPE I, ELANTRA IV, I30, I40 I, I40 I CW, IX35, IX55, SANTA FÉ I, SANTA FÉ II, SANTA FÉ III, TUCSON KIA CEE'D, PRO CEE'D 1.4-Electric 08.00-05.19

View part

CTR Stabilizer bar bushing CTRGV0606

Stabilizer bar bushing rear bottom L/R (16mm) fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15

View part

CTR Stabilizer bar bushing CTRGV0609

Stabilizer bar bushing front L/R fits: HYUNDAI SONATA VII, TUCSON KIA OPTIMA 1.6-2.4 09.14-

View part

CTR Rear wishbone silent block CTRGV0668

Rear track control arm silent block L/R (rear) fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER VII, LANCER VIII, OUTLANDER II PEUGEOT 4007, 4008 1.3-3.0 09.03-

View part

CTR Rear wishbone silent block CTRGV0669

Rear track control arm silent block L/R (bottom rear) fits: NISSAN NV300, QASHQAI I, QASHQAI II, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I, KOLEOS II 1.2-2.5 11.06-

View part

CTR Stabilizer bar bushing CTRGV0671

Stabilizer bar bushing front L/R fits: NISSAN CUBE, MICRA C+C III, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.0-1.8 01.03-

View part

CTR Stabilizer bar bushing CTRGV0672

Stabilizer bar bushing rear L/R fits: MITSUBISHI ECLIPSE IV, ENDEAVOR, GALANT IX 2.4/3.8 01.03-

View part

CTR Stabilizer bar bushing CTRGV0675

Stabilizer bar bushing front L/R fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) NISSAN JUKE, LEAF, NV200, NV200 / EVALIA 0.9-Electric 09.02-

View part

CTR Stabilizer bar bushing CTRGV0676

Stabilizer bar bushing front L/R fits: TOYOTA MR2 III 1.8 10.99-06.07

View part

CTR Front track control arm silent block CTRGV0677

Front track control arm silent block in the back L/R fits: NISSAN ALMERA II 1.5-2.2D 01.00-11.06

View part

CTR Stabilizer bar bushing CTRGV0678

Stabilizer bar bushing rear L/R fits: MITSUBISHI LANCER VII, OUTLANDER I 1.3-2.4 01.02-12.13

View part

CTR Rear wishbone silent block CTRGV0679

Rear track control arm silent block L/R (top in the front/rear) fits: HONDA CIVIC IX, CR-V III, CR-V IV, FR-V 1.6D-2.4 08.04-12.18

View part

CTR Stabilizer bar bushing CTRGV0680

Stabilizer bar bushing rear L/R fits: NISSAN ARMADA MK I, NAVARA NP300, PATHFINDER III, TITAN 2.5D/3.0D/5.6 10.03-

View part

CTR Stabilizer bar bushing CTRGV0681

Stabilizer bar bushing front L/R fits: HONDA CIVIC VIII 1.8/2.2D 09.05-12.11

View part

CTR Rear wishbone silent block CTRGV0682

Rear track control arm silent block L/R (rear) fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

CTR Rear wishbone silent block CTRGV0683

Rear track control arm silent block L/R (in the front rear) fits: MAZDA 6 1.8-2.5 08.07-

View part

CTR Rear wishbone silent block CTRGV0687

Rear track control arm silent block L/R (rear) fits: HONDA HR-V 1.6 03.99-09.05

View part

CTR Stabilizer bar bushing CTRGV0693

Stabilizer bar bushing rear L/R fits: NISSAN ARMADA MK I, NAVARA NP300, TITAN 2.5D/5.6 10.03-

View part

CTR Steering knuckle silent block CTRGV0710

Knuckle silentblock L/R rear fits: HYUNDAI ELANTRA IV, ELANTRA V, ELANTRA VI, I30, IONIQ, KONA INFINITI QX56 KIA CEED, CERATO II, CERATO III, CERATO IV, NIRO, NIRO I, SELTOS 1.0-Electric 08.03-

View part

CTR Stabilizer bar bushing CTRGV0751

Stabilizer bar bushing front L/R fits: MAZDA 3, 6, CX-5 1.5-2.5 11.11-

View part

CTR Engine mount CTRGZ0094

Engine mount in the front L/R, hydraulic fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 06.06-12.12

View part

CTR Engine mount CTRGZ0099

Engine mount fits: KIA CERATO II, CERATO KOUP II 1.6/2.0 01.09-02.14

View part

CTR Stabilizer link CTRPL0815

Stabilizer link front L/R fits: FORD GALAXY III, GALAXY MK III, MONDEO V, RANGER, S-MAX FORD USA EDGE 1.0-3.2D 04.11-

View part

CTR Stabilizer link CTRPL0816

Stabilizer link front L/R fits: FORD RANGER 2.0D-3.2D 04.11-

View part

CTR Stabilizer link CTRPL0817L

Stabilizer link front L fits: FORD RANGER 2.0D-3.2D 04.11-

View part

CTR Stabilizer link CTRPL0817R

Stabilizer link front R fits: FORD RANGER 2.0D-3.2D 04.11-

View part

CTR Stabilizer bar bushing CVS-1

Stabilizer bar bushing front L/R (23mm)

View part

CTR MacPherson strut mount GA0001

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0001K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0002

MacPherson strut mount front L/R fits: HYUNDAI ACCENT IV, I20 I, IX20 KIA PICANTO II, RIO III, VENGA 1.0-1.6LPG 08.08-

View part

CTR MacPherson strut mount GA0002K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0003

MacPherson strut mount front L/R fits: KIA CERATO I 1.6/2.0 03.04-12.09

View part

CTR MacPherson strut mount GA0003K

MacPherson strut mount front L/R fits: KIA CERATO I, CERATO II, CERATO KOUP II, CERATO KOUP III 1.6/2.0 05.06-

View part

CTR MacPherson strut mount GA0004

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0004K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0005C

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

CTR MacPherson strut mount GA0005D

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

CTR MacPherson strut mount GA0005L

MacPherson strut mount front L (with a bearing)

View part

CTR MacPherson strut mount GA0005R

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

CTR MacPherson strut mount GA0006

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI GETZ 1.1-1.6 09.02-

View part

CTR MacPherson strut mount GA0007

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0008

MacPherson strut mount front L/R fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

CTR MacPherson strut mount GA0008K

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

CTR MacPherson strut mount GA0009

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI TRAJET, TRAJET FURGON/NADWOZIE WIELKOPRZESTRZENNE 2.0/2.0D/2.7 09.99-07.08

View part

CTR MacPherson strut mount GA0010

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0011

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0011K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0012

MacPherson strut mount front L/R

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account