Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

6,258 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 6,258 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 6,258 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR MacPherson strut mount GA0012K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0013

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0013K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0014

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI SONATA VI 2.0 06.09-06.14

View part

CTR MacPherson strut mount GA0015

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0016

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0016K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0017

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0018

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0018K

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0019

MacPherson strut mount front L/R fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

CTR MacPherson strut mount GA0019K

MacPherson strut mount front L/R fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

CTR MacPherson strut mount GA0021

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI SONATA VII KIA OPTIMA 2.0/2.4 09.14-12.19

View part

CTR MacPherson strut mount GA0021K

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI SONATA VII KIA OPTIMA 2.0/2.4 09.14-12.19

View part

CTR MacPherson strut mount GA0022

MacPherson strut mount front L/R fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, NIRO, NIRO I, PROCEED, SOUL III, XCEED 1.0-Electric 10.15-

View part

CTR MacPherson strut mount GA0022K

MacPherson strut mount front L/R fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, NIRO, NIRO I, PROCEED, SOUL III, XCEED 1.0-Electric 10.15-

View part

CTR MacPherson strut mount GA0023L

MacPherson strut mount rear L

View part

CTR MacPherson strut mount GA0023R

MacPherson strut mount rear R

View part

CTR MacPherson strut mount GA0024

MacPherson strut mount rear L/R (with a bearing) fits: HYUNDAI ACCENT II 1.3/1.5/1.5D 01.00-11.05

View part

CTR MacPherson strut mount GA0025

MacPherson strut mount rear L/R

View part

CTR MacPherson strut mount GA0026

MacPherson strut mount rear L/R

View part

CTR MacPherson strut mount GA0027C

MacPherson strut mount front L (with a bearing) fits: KIA CARENS III 1.6-2.0LPG 09.06-06.13

View part

CTR MacPherson strut mount GA0027D

MacPherson strut mount front R fits: KIA CARENS III 1.6-2.0LPG 09.06-06.13

View part

CTR MacPherson strut mount GA0027L

MacPherson strut mount front L (with a bearing) fits: KIA MAGENTIS II 2.0/2.0D/2.7 11.05-12.10

View part

CTR MacPherson strut mount GA0027R

MacPherson strut mount front R (with a bearing) fits: KIA MAGENTIS II 2.0/2.0D/2.7 11.05-12.10

View part

CTR MacPherson strut mount GA0028

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI TUCSON 2.0 08.04-03.10

View part

CTR MacPherson strut mount GA0028K

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI H-1, H-1 / STAREX, H-1 CARGO, H-1 TRAVEL, IX55, SANTA FÉ II KIA CARNIVAL III 2.0D-3.8 10.97-

View part

CTR MacPherson strut mount GA0029

MacPherson strut mount front L/R (with a bearing) fits: KIA RIO I 1.3/1.5 08.00-02.05

View part

CTR MacPherson strut mount GA0030L

MacPherson strut mount front L (with a bearing) fits: KIA RIO I 1.3/1.5 08.00-02.05

View part

CTR MacPherson strut mount GA0030R

MacPherson strut mount front R (with a bearing) fits: KIA RIO I 1.3 08.00-02.05

View part

CTR MacPherson strut mount GA0031

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0031K

MacPherson strut mount front L/R (with a bearing)

View part

CTR MacPherson strut mount GA0032

MacPherson strut mount front L/R (with a bearing) fits: CHEVROLET SPARK OPEL KARL 1.0-1.2LPG 03.10-

View part

CTR MacPherson strut mount GA0033

MacPherson strut mount front L/R (with a bearing) fits: DAEWOO CIELO, CIELO LOAD RUNNER, ESPERO, NEXIA OPEL ASCONA B, KADETT C, KADETT E, KADETT E COMBO, MANTA B 1.5-2.0 09.75-12.02

View part

CTR MacPherson strut mount GA0034

MacPherson strut mount front fits: DAEWOO DAMAS 0.8 10.91-07.98

View part

CTR MacPherson strut mount GA0035

MacPherson strut mount front L/R (with a bearing) fits: CHEVROLET AVEO / KALOS, MATIZ, SPARK DAEWOO KALOS, MATIZ 0.8-1.6 09.98-

View part

CTR MacPherson strut mount GA0035K

MacPherson strut mount front L/R (with a bearing) fits: CHEVROLET AVEO / KALOS, MATIZ, SPARK DAEWOO KALOS, MATIZ 0.8-1.6 09.98-

View part

CTR MacPherson strut mount GA0036

MacPherson strut mount front L/R (with a bearing) fits: CHEVROLET AVEO / KALOS, MATIZ, SPARK DAEWOO KALOS 0.8-1.6 09.00-

View part

CTR MacPherson strut mount GA0037L

MacPherson strut mount front L (with a bearing) fits: DAEWOO LANOS 1.3/1.5/1.6 02.97-

View part

CTR MacPherson strut mount GA0037R

MacPherson strut mount front R (with a bearing) fits: DAEWOO LANOS 1.3/1.5/1.6 02.97-

View part

CTR MacPherson strut mount GA0038

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0038K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0039

MacPherson strut mount rear L/R fits: CHEVROLET LACETTI, NUBIRA 1.4-2.0D 01.05-

View part

CTR MacPherson strut mount GA0040

MacPherson strut mount front L/R fits: HYUNDAI SOLARIS KIA RIO IV 1.0-1.6 01.17-

View part

CTR MacPherson strut mount GA0040K

MacPherson strut mount front L/R fits: HYUNDAI ACCENT V, SOLARIS KIA RIO IV, STONIC 1.0-1.6D 01.17-

View part

CTR MacPherson strut mount GA0041

MacPherson strut mount front L/R fits: HYUNDAI I10 III, I20 ACTIVE, I20 II KIA PICANTO III 1.0-1.4D 11.14-

View part

CTR MacPherson strut mount GA0041K

MacPherson strut mount front L/R

View part

CTR MacPherson strut mount GA0042

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ACCENT IV, ACCENT V, I10 II, I10 III, I20 III, SOLARIS KIA RIO III 1.0-1.6D 11.10-

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account