Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

5,366 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 5,366 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,366 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR Steering gear arm CA0005

Steering gear arm L/R fits: HYUNDAI GALLOPER II 2.5D/2.6D/3.0 08.98-12.03

View part

CTR Steering gear arm CA0014

Steering gear arm R fits: MITSUBISHI L200 1.6/2.0 11.86-10.96

View part

CTR Steering gear arm CA0015

Steering gear arm L/R fits: MITSUBISHI PAJERO CLASSIC, PAJERO II 2.5D-3.5 12.90-

View part

CTR Steering gear arm CA0018

Steering gear arm L/R

View part

CTR Steering gear arm CA0022

Steering gear arm L

View part

CTR Steering gear arm CA0030

Steering gear arm L fits: NISSAN PICK UP 1.8/2.3D 01.83-03.86

View part

CTR Steering gear arm CA0032

Steering gear arm R fits: NISSAN PICK UP 2.4/2.5D 04.92-12.12

View part

CTR Steering gear arm CA0034

Steering gear arm L/R fits: NISSAN NAVARA, NP300, PICK UP, TERRANO I 2.4-3.0 03.86-

View part

CTR Steering gear arm CA0043

Steering gear arm L

View part

CTR Steering gear arm CA0057

Steering gear arm L/R fits: TOYOTA HILUX V 1.8/2.4D 09.88-06.98

View part

CTR Steering gear arm CA0059

Steering gear arm L/R

View part

CTR Steering gear arm CA0060

Steering gear arm L/R fits: TOYOTA 4 RUNNER II, HILUX V 2.4/2.4D/3.0 09.88-12.97

View part

CTR Steering gear arm CA0063

Steering gear arm L/R fits: TOYOTA 4 RUNNER II, HILUX V 2.4-3.0D 09.88-12.97

View part

CTR Steering gear arm CA0066

Steering gear arm L

View part

CTR Steering gear arm CA0069

Steering gear arm L

View part

CTR Steering gear arm CA0071

Steering gear arm fits: CHEVROLET SILVERADO 2500 GMC SIERRA 2500 HD 5.3/6.0/6.6D 09.10-

View part

CTR Steering gear arm CA0074

Steering gear arm L/R vehicle with the steering wheel on the left side fits: FORD USA EXPEDITION, F-150, F-250 LINCOLN NAVIGATOR 4.2-7.3D 08.96-12.03

View part

CTR Front ball joint CB0001

Axle ball joint L/R (bottom front) (cone diameter 54mm, with a nut) fits: MINI (R56), (R57), (R58), (R59), CLUBMAN (R55), CLUBVAN (R55) 1.4-2.0D 09.06-06.15

View part

CTR Front ball joint CB0002

Axle ball joint L/R (bottom front) (cone diameter 15mm, with a nut) fits: MINI (R50, R53), (R52) 1.4/1.4D/1.6 06.01-07.08

View part

CTR Front ball joint CB0003

Axle ball joint L/R (bottom/outer front) (cone diameter 50mm, with a nut) fits: BMW 3 (E30), 3 (E36), Z1 1.6-3.2 09.82-11.99

View part

CTR Front ball joint CB0004

Axle ball joint L/R (bottom/inner front) (cone diameter 50mm, with a nut) fits: BMW 3 (E30), 3 (E36), Z1 1.6-3.2 09.82-11.99

View part

CTR Front ball joint CB0005

Axle ball joint L/R (bottom front) (cone diameter 15,4mm, with a nut with extra materials) fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

CTR Front ball joint CB0007

Axle ball joint L/R (bottom front) (cone diameter 56mm, with a nut) fits: JEEP CHEROKEE, LIBERTY 2.4-3.7 09.01-01.08

View part

CTR Front ball joint CB0009

Axle ball joint L/R (top front) (cone diameter 45,5mm, with a nut) fits: CHRYSLER SEBRING, STRATUS DODGE STRATUS II 2.0-3.0 05.95-06.07

View part

CTR Front ball joint CB0010

Axle ball joint L/R (bottom front) (cone diameter 60mm, with a nut) fits: CHRYSLER ASPEN DODGE DURANGO 3.7/4.7/5.7 11.03-12.10

View part

CTR Front ball joint CB0011

Axle ball joint L/R (bottom front) (cone diameter 54,5mm, with a nut) fits: CHRYSLER SEBRING DODGE AVENGER, JOURNEY FIAT FREEMONT JEEP CHEROKEE LANCIA FLAVIA 2.0-3.6ALK 09.06-

View part

CTR Front ball joint CB0013

Axle ball joint L/R (bottom front) (cone diameter 62mm, with a nut) fits: DODGE RAM 1500 3.7-8.3 06.01-12.08

View part

CTR Front ball joint CB0014

Axle ball joint L/R (top front) (with a nut) fits: DODGE DAKOTA, DURANGO 4.7-6.0 09.97-12.03

View part

CTR Front ball joint CB0016

Axle ball joint L/R (bottom front) (cone diameter 60mm, with a nut) fits: DODGE DAKOTA, DURANGO 2.5-6.0 10.95-12.03

View part

CTR Front ball joint CB0017

Axle ball joint L/R (top front) (cone diameter 58mm, with a nut) fits: DODGE RAM 1500, RAM 2500, RAM 3500 3.9-8.0 01.93-09.01

View part

CTR Front ball joint CB0018

Axle ball joint L/R (top front) (cone diameter 55mm, with a nut) fits: DODGE RAM, RAM 1500, RAM 2500, RAM 3500 RAM 1500, 2500, 3500 3.0D-8.3 06.01-

View part

CTR Front ball joint CB0019

Axle ball joint L/R (top front) (cone diameter 55mm, with a nut) fits: DODGE RAM, RAM 1500, RAM 2500, RAM 3500 RAM 1500, 2500, 3500 3.0D-8.3 06.01-

View part

CTR Front ball joint CB0020

Axle ball joint L/R (bottom front) (cone diameter 45mm) fits: CHRYSLER NEON II, PT CRUISER, VOYAGER III 1.6-2.5D 01.95-12.10

View part

CTR Rear wishbone silent block CB0025

Rear track control arm silent block L/R (bottom rear)

View part

CTR Front ball joint CB0026

Axle ball joint L/R (bottom/outer front) (cone diameter 58mm, with a nut) fits: CHRYSLER 300C DODGE CHALLENGER LANCIA THEMA 2.7-6.4 09.04-

View part

CTR Front ball joint CB0027

Axle ball joint L/R (bottom front) (cone diameter 60mm, with a nut) fits: DODGE NITRO JEEP CHEROKEE, COMMANDER, GRAND CHEROKEE III, LIBERTY 2.8D-6.1 10.04-

View part

CTR Front ball joint CB0032

Axle ball joint L/R (bottom front) (cone diameter 16,5mm, with extras) fits: FORD FOCUS I 1.4-2.0 08.98-03.05

View part

CTR Front ball joint CB0033

Axle ball joint L/R (bottom front) (cone diameter 18mm, with a nut) fits: VOLVO C30, C70 II, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS II 1.4-Electric 10.03-06.13

View part

CTR Front ball joint CB0034

Axle ball joint L/R (bottom front) (cone diameter 46mm, with a nut) fits: FORD USA TAURUS 3.0/3.0ALK/3.4 06.95-12.05

View part

CTR Front ball joint CB0035

Axle ball joint L/R (bottom front) (cone diameter 65mm, with a nut) fits: FORD USA EXPEDITION, F-150 LINCOLN MARK LT 4.2-5.4ALK 10.02-12.10

View part

CTR Front ball joint CB0036

Axle ball joint L/R (bottom front) (cone diameter 65mm, with a nut) fits: FORD USA EXPEDITION, F-150 LINCOLN NAVIGATOR 3.5-6.2 09.04-

View part

CTR Front ball joint CB0038

Axle ball joint L/R (bottom front) (cone diameter 65mm, with a nut) fits: FORD USA EXPEDITION, F-150 LINCOLN NAVIGATOR 3.5/5.0 09.10-

View part

CTR Front ball joint CB0039

Axle ball joint L/R (top front) fits: FORD USA CROWN VICTORIA LINCOLN CONTINENTAL TOWN CAR, TOWN CAR III 4.6 01.94-12.11

View part

CTR Front ball joint CB0041

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: VOLVO C30, C70 II, S40 II, V50 FORD FOCUS II 1.6-Electric 12.03-06.13

View part

CTR Front ball joint CB0042

Axle ball joint L/R (top front) (cone diameter 48mm, with a nut) fits: FORD USA EXPLORER LINCOLN AVIATOR 4.0/4.0ALK/4.6 09.01-

View part

CTR Front ball joint CB0043

Axle ball joint L/R (bottom front) (with extra materials) fits: VOLVO S60 II, V60 I, XC60 I, XC60 II, XC70 II 2.0-3.2 04.07-

View part

CTR Front ball joint CB0045

Axle ball joint L/R (bottom front) (cone diameter 16,5mm, with extra materials) fits: FORD FIESTA, FIESTA III, FIESTA IV, KA, PUMA, STREET KA 1.0-1.8D 03.89-11.08

View part

CTR Front ball joint CB0046L

Axle ball joint L (bottom front) (with extra materials) fits: FORD KUGA I, KUGA II 1.5-2.5 02.08-

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account