Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

6,258 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 6,258 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 6,258 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR Front ball joint CB0039

Axle ball joint L/R (top front) fits: FORD USA CROWN VICTORIA LINCOLN CONTINENTAL TOWN CAR, TOWN CAR III 4.6 01.94-12.11

View part

CTR Front ball joint CB0041

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: VOLVO C30, C70 II, S40 II, V50 FORD FOCUS II 1.6-Electric 12.03-06.13

View part

CTR Front ball joint CB0042

Axle ball joint L/R (top front) (cone diameter 48mm, with a nut) fits: FORD USA EXPLORER LINCOLN AVIATOR 4.0/4.0ALK/4.6 09.01-

View part

CTR Front ball joint CB0043

Axle ball joint L/R (bottom front) (with extra materials) fits: VOLVO S60 II, V60 I, XC60 I, XC60 II, XC70 II 2.0-3.2 04.07-

View part

CTR Front ball joint CB0045

Axle ball joint L/R (bottom front) (cone diameter 16,5mm, with extra materials) fits: FORD FIESTA, FIESTA FURGON/NADWOZIE WIELKOPRZESTRZENNE, FIESTA III, FIESTA IV, KA, PUMA 1.0-1.8D 03.89-11.08

View part

CTR Front ball joint CB0046L

Axle ball joint L (bottom front) (with extra materials) fits: FORD KUGA I, KUGA II 1.5-2.5 02.08-

View part

CTR Front ball joint CB0046R

Axle ball joint R (bottom front) (with extra materials) fits: FORD KUGA I, KUGA II 1.5-2.5 02.08-

View part

CTR Front ball joint CB0047

Axle ball joint L/R (bottom front) (cone diameter 21mm, with extra materials) fits: FORD MONDEO III JAGUAR X-TYPE I 1.8-3.0 10.00-12.09

View part

CTR Front ball joint CB0051

Axle ball joint L/R (top front) (with a nut with extra materials) fits: FIAT 125, 132, 1500-2300, ARGENTA FSO 125P, POLONEZ I, POLONEZ II, POLONEZ III 1.3-2.5D 07.62-03.02

View part

CTR Front ball joint CB0052

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: FIAT 124, 124 SPIDER, 125, 132, 1500, 1500-2300, ARGENTA FSO 125P, POLONEZ III 1.2-2.5D 07.62-03.02

View part

CTR Front ball joint CB0053

Axle ball joint L/R (top front) (with a nut with extra materials) fits: LADA 1200-1500, 1200-1600, NADESCHDA, NIVA, NOVA 1.2-1.9D 01.70-

View part

CTR Front ball joint CB0054

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: LADA 1200-1500, 1200-1600, NIVA, NOVA 1.2-1.9D 01.70-

View part

CTR Front ball joint CB0055

Axle ball joint L/R (bottom/outer front) (cone diameter 46mm) fits: FIAT 500, 500E, PANDA LANCIA YPSILON 0.9-Electric 07.07-

View part

CTR Front ball joint CB0056

Axle ball joint L/R (bottom front) (with extra materials) fits: FIAT BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

CTR Front ball joint CB0057L

Axle ball joint L (bottom front) (with a nut with extra materials)

View part

CTR Front ball joint CB0057R

Axle ball joint R (bottom front) (with a nut with extra materials)

View part

CTR Front ball joint CB0058

Axle ball joint L/R (top front) (with a nut with extra materials) fits: BUICK CENTURY, ELECTRA, LESABRE CADILLAC BROUGHAM, FLEETWOOD CHEVROLET BLAZER S10, CAMARO, CAPRICE 2.2-5.7D 01.70-05.05

View part

CTR Front ball joint CB0059

Axle ball joint (bottom front) (with a nut with extra materials)

View part

CTR Front ball joint CB0061

Axle ball joint L/R (bottom front, M12) fits: CHEVROLET CAPTIVA OPEL ANTARA A, SINTRA 11.96-

View part

CTR Front ball joint CB0063

Axle ball joint (bottom front) (with a nut with extra materials)

View part

CTR Front ball joint CB0064

Axle ball joint L/R (top front) (cone diameter 48,5mm, with a nut with ball joint with pads) fits: CHEVROLET SSR, TRAILBLAZER ISUZU ASCENDER SAAB 9-7X 4.2/5.3/6.0 09.01-

View part

CTR Front ball joint CB0065

Axle ball joint L/R (bottom front) (cone diameter 63mm, with a nut) fits: CHEVROLET SSR, TRAILBLAZER ISUZU ASCENDER SAAB 9-7X 4.2/5.3/6.0 09.01-

View part

CTR Front ball joint CB0066

Axle ball joint L/R (top front) (with a nut with extra materials)

View part

CTR Front ball joint CB0067

Axle ball joint L/R (top front) (with a nut) fits: CHEVROLET TRAILBLAZER 2.8D/3.6 08.12-

View part

CTR Front ball joint CB0068

Axle ball joint L/R (bottom front) (with a nut with ball joint) fits: CHEVROLET COLORADO, TRAILBLAZER ISUZU D-MAX I 2.5D-3.7 05.02-

View part

CTR Front ball joint CB0072

Axle ball joint (bottom front) (cone diameter 55,5mm, with a nut) fits: CHEVROLET CORVETTE 6.2 04.14-12.19

View part

CTR Front ball joint CB0073

Axle ball joint L/R (top front) (cone diameter 48mm) fits: CADILLAC CTS 2.8/3.6/5.7 03.05-09.07

View part

CTR Front ball joint CB0075

Axle ball joint (bottom front) (cone diameter 63mm, with a nut) fits: CADILLAC CTS, SRX, STS 2.8-6.2 09.03-

View part

CTR Rear wishbone silent block CB0076

Rear track control arm silent block L/R (rear)

View part

CTR Front ball joint CB0081

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: CHEVROLET CAPTIVA GMC TERRAIN OPEL ANTARA A 2.0D-3.2 06.06-

View part

CTR Front ball joint CB0082

Axle ball joint L/R (bottom front) (cone diameter 16mm, with extra materials) fits: ABARTH GRANDE PUNTO, PUNTO ALFA ROMEO MITO FIAT FIORINO 0.9-Electric 06.05-

View part

CTR Front ball joint CB0083

Axle ball joint L/R (top front) (with a nut with extra materials) fits: CADILLAC ESCALADE CHEVROLET ASTRO, C1500, C2500, EXPRESS, EXPRESS 1500, EXPRESS 2500, K1500, K2500 4.3-7.4 09.87-

View part

CTR Front ball joint CB0084

Axle ball joint L/R

View part

CTR Front ball joint CB0085

Axle ball joint L/R (bottom front) (cone diameter 61mm, with a nut) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, AVALANCHE 1500, SILVERADO 1500, SUBURBAN, SUBURBAN 1500, TAHOE 4.3-6.2LPG 10.98-

View part

CTR Front ball joint CB0086

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, EXPRESS, EXPRESS 1500, EXPRESS 2500, EXPRESS 3500, SILVERADO 1500 4.3-8.1 10.96-

View part

CTR Front ball joint CB0087

Axle ball joint L/R (bottom front) (cone diameter 67mm, with a nut) fits: CHEVROLET EXPRESS 2500 6.5D 09.96-12.99

View part

CTR Front ball joint CB0088

Axle ball joint L/R (top front) (with a nut with extra materials) fits: CHEVROLET CAMARO PONTIAC FIREBIRD 3.4-6.2 01.70-

View part

CTR Front ball joint CB0089

Axle ball joint L/R (bottom front) (cone diameter 67mm, with a nut) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, EXPRESS, EXPRESS 1500, EXPRESS 2500, EXPRESS 3500, SILVERADO 1500 4.3-8.1 10.96-

View part

CTR Front ball joint CB0091

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: BUICK REGAL CHEVROLET LUMINA 2.8/3.1/3.8 10.87-09.97

View part

CTR Front ball joint CB0092

Axle ball joint (top front) (cone diameter 53mm, with a nut) fits: CHEVROLET SILVERADO 1500, SUBURBAN, SUBURBAN 2500, TAHOE 4.3-6.0ALK 09.99-

View part

CTR Front ball joint CB0093

Axle ball joint L/R (bottom front) (cone diameter 56mm, with a nut)

View part

CTR Front ball joint CB0094

Axle ball joint L/R (bottom front) (cone diameter 42mm, with a nut) fits: OPEL ASTRA K 1.0-1.6D 06.15-12.21

View part

CTR Front ball joint CB0095

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: BUICK ENCLAVE GMC ACADIA 3.6 09.08-04.17

View part

CTR Front ball joint CB0096

Axle ball joint L/R (bottom front) (4WD vehicles) fits: CHEVROLET BLAZER S10, S10 GMC JIMMY 2.2/4.3 01.94-09.05

View part

CTR Front ball joint CB0097

Axle ball joint L/R (top front) (with a nut with extra materials) fits: CHEVROLET BLAZER S10, S10 GMC JIMMY, S15 JIMMY 2.2/2.8/4.3 09.82-09.05

View part

CTR Front ball joint CB0106

Axle ball joint L/R (bottom front) (cone diameter 48mm, with a nut) fits: HONDA LEGEND I, LEGEND II, PRELUDE IV, PRELUDE V ROVER 800 2.0-3.2 01.86-12.01

View part

CTR Front ball joint CB0107

Axle ball joint L/R (top front) (cone diameter 43mm, with a nut) fits: HONDA ACCORD VI, ACCORD VII, CIVIC VI, ODYSSEY 1.6-3.0 03.96-05.08

View part

CTR Front ball joint CB0109

Axle ball joint L/R (bottom front) (cone diameter 44mm, with a nut) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA, PRELUDE V 1.3-2.0D 09.87-02.02

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account