Partios Wholesale catalogue

Blue Print Distributor | Parts

Brake disc (1,879) · Brake pad set (1,417) · Clutch assy (1,292) · Air filter (1,226) · Wheel bearing kit (867) · Stabilizer link (695) · Flexible brake hoses (693) · Cabin filter (677) · 299 further part types (17,050)

26,117 current catalogue lines

About the BLUE PRINT range

The Blue Print range at Partios is broad rather than specialised. It has 26,117 lines spanning 307 part types across several vehicle systems. The largest groups are brake disc (1,879), brake pad set (1,417), clutch assy (1,292), air filter (1,226) and wheel bearing kit (867). They account for only 29% of the range, though. The other 18,420 lines sit across 301 further part types, which is what makes this a range to search rather than browse. That tail includes flexible brake hoses, cabin filter and wheel suspension track control arm, front. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 26,117 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

BLUE PRINT Engine mount ADBP800644

Engine mount front R (hydraulic) fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6D/1.6DH/2.5 11.20-

View part

BLUE PRINT Rear wishbone silent block ADBP800645

Rear track control arm silent block L (middle rear) fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, EV3, EV4, K4, NIRO, NIRO I, NIRO II, PROCEED, SELTOS, SOUL III 1.0-Electric 10.15-

View part

BLUE PRINT Stabilizer bar bushing ADBP800646

Stabilizer bar bushing rear L/R (19mm) fits: HYUNDAI ACCENT IV, GRAND SANTA FÉ, I40 I, I40 I CW, KONA, NEXO, SANTA FÉ III KIA PICANTO III, RIO III, SELTOS, SORENTO II 1.0-Electric 06.09-

View part

BLUE PRINT Stabilizer bar bushing ADBP800647

Stabilizer bar bushing front L/R (21mm) fits: MG ZS 1.0/1.5/Electric 10.17-

View part

BLUE PRINT Engine mount ADBP800648

Engine mount R, hydraulic fits: BMW 2 (G42, G87), 4 (G23, G83), Z4 (G29) TOYOTA SUPRA 3.0/3.0H 11.18-

View part

BLUE PRINT Engine mount ADBP800649

Engine mount L, hydraulic fits: BMW 2 (G42, G87), 4 (G23, G83), Z4 (G29) TOYOTA SUPRA 3.0/3.0H 11.18-

View part

BLUE PRINT Stabilizer bar bushing ADBP800650

Stabilizer bar bushing front L/R (21mm) fits: NISSAN MICRA V 0.9-1.5D 12.16-

View part

BLUE PRINT MacPherson strut mount ADBP800653

MacPherson strut mount rear R fits: HYUNDAI ELANTRA VI, I30, KONA KIA CERATO IV, NIRO I, SELTOS, SOUL III, SOUL III CARGO 1.0-Electric 10.15-

View part

BLUE PRINT Engine mount ADBP800654

Engine mount rear, rubber-metal fits: HYUNDAI I10 II 1.0/1.0LPG 08.13-12.19

View part

BLUE PRINT Rear wishbone silent block ADBP800655

Rear track control arm silent block L/R (outer/top rear) fits: MAZDA 6, CX-5 2.0-2.5H 11.11-

View part

BLUE PRINT Rear wishbone silent block ADBP800656

Rear track control arm silent block L/R (inner/top rear) fits: MAZDA 6, CX-5 2.0-2.5H 11.11-

View part

BLUE PRINT Rear wishbone silent block ADBP800657

Rear track control arm silent block R (middle rear) fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, EV3, EV4, K4, NIRO, NIRO I, NIRO II, PROCEED, SELTOS, SOUL III 1.0-Electric 10.15-

View part

BLUE PRINT Engine mount ADBP800658

Engine mount front R, hydraulic fits: FIAT TALENTO NISSAN NV300 OPEL VIVARO B RENAULT TRAFIC III 1.6D/2.0D 05.14-

View part

BLUE PRINT Shock absorber bumper ADBP800659

Shock absorber bumper rear L/R (height 80mm) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-

View part

BLUE PRINT Stabilizer bar bushing ADBP800660

Stabilizer bar bushing front L/R (22mm) fits: NISSAN ALMERA, NOTE, VERSA II 1.2-1.6ALK 08.11-

View part

BLUE PRINT MacPherson strut mount ADBP800661

MacPherson strut mount front L/R fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

BLUE PRINT MacPherson strut bearing ADBP800662

MacPherson strut bearing front L/R fits: MAZDA 3, 323 S VI, CX-30 1.5-2.5H 09.98-

View part

BLUE PRINT MacPherson strut bearing ADBP800663

MacPherson strut bearing front L/R fits: SUZUKI BALENO, ERTIGA, SWIFT IV 1.0-1.5 01.13-

View part

BLUE PRINT MacPherson strut mount ADBP800664

MacPherson strut mount front L/R (with a bearing) fits: DACIA JOGGER, LOGAN III, SANDERO III MITSUBISHI ASX, COLT VII, GRANDIS RENAULT 4, 5, CAPTUR II, CLIO V, SYMBIOZ, TALIANT 1.0-Electric 06.19-

View part

BLUE PRINT MacPherson strut mount ADBP800665

MacPherson strut mount front L/R (with a bearing) fits: MERCEDES CITAN TOURER (W420), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W420), EQT (W420), T (W420) NISSAN QASHQAI III, TOWNSTAR 1.2H-Electric 04.21-

View part

BLUE PRINT MacPherson strut mount ADBP800666

MacPherson strut mount front L/R (with a bearing) fits: MITSUBISHI COLT V, LANCER VI, LANCER VII, MIRAGE V 1.3/1.5/1.6 09.95-12.13

View part

BLUE PRINT MacPherson strut bearing ADBP800667

MacPherson strut bearing front L/R fits: DACIA JOGGER, LOGAN III, SANDERO III MITSUBISHI ASX, COLT VII, GRANDIS RENAULT 4, 5, ARKANA I, CAPTUR II, CLIO V, SYMBIOZ, TALIANT 1.0-Electric 06.19-

View part

BLUE PRINT MacPherson strut mount ADBP800668

MacPherson strut mount front L/R (with a bearing) fits: MERCEDES CITAN TOURER (W420), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W420), EQT (W420), T (W420) NISSAN QASHQAI III, TOWNSTAR 1.2H-Electric 04.21-

View part

BLUE PRINT MacPherson strut mount ADBP800669

MacPherson strut mount rear R fits: MITSUBISHI COLT, COLT CZC VI, COLT VI SMART FORFOUR 1.1-1.5D 01.04-06.12

View part

BLUE PRINT MacPherson strut bearing ADBP800670

MacPherson strut bearing front L/R fits: CHEVROLET LACETTI, NUBIRA, OPTRA DAEWOO BROUGHAM, LACETTI, NUBIRA, PRINCE 1.4-2.0D 08.93-

View part

BLUE PRINT Engine mount ADBP800672

Engine mount rear R, rubber-metal fits: HONDA CIVIC X 1.0-2.0 09.15-

View part

BLUE PRINT Stabilizer bar bushing ADBP800673

Stabilizer bar bushing rear L/R (19mm) fits: NISSAN NAVARA NP300 RENAULT ALASKAN 2.3D/2.5D 07.14-

View part

BLUE PRINT MacPherson strut bearing ADBP800674

MacPherson strut bearing front L/R fits: NISSAN ALMERA, MICRA IV, NOTE, VERSA II 1.2-1.6ALK 05.10-

View part

BLUE PRINT Stabilizer bar bushing ADBP800675

Stabilizer bar bushing front L/R (18mm) fits: MITSUBISHI MIRAGE / SPACE STAR VI, MIRAGE VI 1.0/1.2/1.2LPG 01.12-

View part

BLUE PRINT Engine mount ADBP800676

Engine mount rear, rubber-metal fits: TOYOTA YARIS, YARIS / VIOS 1.3 11.05-01.17

View part

BLUE PRINT Propeller shaft support ADBP800677

Propeller shaft support (30mm, with a bearing) fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, OUTLANDER II PEUGEOT 4007 2.0-3.0 11.06-

View part

BLUE PRINT Engine mount ADBP800680

Engine mount front R, hydraulic fits: HONDA CIVIC VIII 1.6/1.8/1.8ALK 09.05-05.13

View part

BLUE PRINT Shock absorber bumper ADBP800681

Shock absorber bumper front L/R (height 86mm) fits: TOYOTA RAV 4 IV 2.0-2.5H 12.12-09.19

View part

BLUE PRINT Shock absorber bumper ADBP800682

Shock absorber bumper rear L/R (height 105mm) fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-

View part

BLUE PRINT MacPherson strut mount ADBP800683

MacPherson strut mount front L/R (with a bearing) fits: MAZDA 3, CX-30 1.5-2.5H 11.18-

View part

BLUE PRINT Propeller shaft support ADBP800684

Propeller shaft support (30mm, with a bearing) fits: CHEVROLET CAPTIVA OPEL ANTARA A 2.0D-3.2 06.06-

View part

BLUE PRINT MacPherson strut mount ADBP800686

MacPherson strut mount front L/R (with a bearing) fits: NISSAN MICRA V 0.9-1.5D 12.16-

View part

BLUE PRINT MacPherson strut mount ADBP800687

MacPherson strut mount rear R fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

BLUE PRINT Shock absorber bumper ADBP800688

Shock absorber bumper front L/R fits: MAZDA CX-5 2.0/2.2D/2.5 11.11-

View part

BLUE PRINT Rear wishbone silent block ADBP800689

Rear track control arm silent block L/R (in the front in the front/rear) fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12

View part

BLUE PRINT Exhaust system hanger ADBP800691

Exhaust system hanger fits: HONDA ACCORD IX, CR-V IV 2.4 01.12-

View part

BLUE PRINT Engine mount ADBP800692

Engine mount R, hydraulic fits: KIA SPORTAGE V 1.6-2.0 09.21-

View part

BLUE PRINT Engine mount ADBP800693

Engine mount rear, bottom, rubber-metal fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6-2.0 01.21-

View part

BLUE PRINT Front track control arm silent block ADBP800694

Front track control arm silent block L/R (15x74x60 mm) fits: TOYOTA AVENSIS, COROLLA, COROLLA VERSO 1.4-2.4 01.01-03.09

View part

BLUE PRINT MacPherson strut mount ADBP800695

MacPherson strut mount rear R fits: LEXUS UX TOYOTA C-HR, COROLLA, PRIUS, PRIUS PHV 1.2-Electric 09.15-

View part

BLUE PRINT Propeller shaft support ADBP800696

Propeller shaft support (30mm, with a bearing) fits: MITSUBISHI L200, L200 / TRITON 2.4D/2.5D 01.04-

View part

BLUE PRINT Engine mount ADBP800698

Engine mount R, hydraulic fits: TOYOTA AURIS, PRIUS, PRIUS PLUS 1.8H 06.08-

View part

BLUE PRINT Front track control arm silent block ADBP800699

Front track control arm silent block L/R (14x39x60 mm) fits: TOYOTA AVENSIS, COROLLA, COROLLA VERSO 1.3-2.4 01.01-03.09

View part

Buying with Partios

Buying BLUE PRINT parts through Partios

Are these genuine BLUE PRINT parts?

Yes. Every BLUE PRINT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source BLUE PRINT parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for BLUE PRINT lines that aren't currently available.

Do you supply BLUE PRINT parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on BLUE PRINT parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a BLUE PRINT order?

It depends on the line. Stocked BLUE PRINT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for BLUE PRINT parts?

No. There's no minimum order value or quantity on a Partios trade account. Some BLUE PRINT lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account