Partios Wholesale catalogue

Blue Print Distributor | Parts

Brake disc (1,879) · Brake pad set (1,417) · Clutch assy (1,292) · Air filter (1,226) · Wheel bearing kit (867) · Stabilizer link (695) · Flexible brake hoses (693) · Cabin filter (677) · 299 further part types (17,050)

26,117 current catalogue lines

About the BLUE PRINT range

The Blue Print range at Partios is broad rather than specialised. It has 26,117 lines spanning 307 part types across several vehicle systems. The largest groups are brake disc (1,879), brake pad set (1,417), clutch assy (1,292), air filter (1,226) and wheel bearing kit (867). They account for only 29% of the range, though. The other 18,420 lines sit across 301 further part types, which is what makes this a range to search rather than browse. That tail includes flexible brake hoses, cabin filter and wheel suspension track control arm, front. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 26,117 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

BLUE PRINT Front track control arm silent block ADBP800700

Front track control arm silent block L/R (13x37x57 mm) fits: SUBARU ASCENT, CROSSTREK, FORESTER, IMPREZA, LEGACY IV, LEGACY V, LEGACY VI, LEVORG, OUTBACK, TRIBECA, WRX, XV 1.5-3.6 09.03-

View part

BLUE PRINT Front track control arm silent block ADBP800702

Front track control arm silent block L/R (22x57x72 mm) fits: LEXUS GX TOYOTA 4 RUNNER V, FJ CRUISER, LAND CRUISER, LAND CRUISER PRADO 2.7-4.6 06.05-

View part

BLUE PRINT Engine mount ADBP800703

Engine mount R, hydraulic fits: MAZDA 2 1.3-1.6D 07.07-06.15

View part

BLUE PRINT MacPherson strut mount ADBP800704

MacPherson strut mount rear R fits: CHEVROLET SPARK 1.0-Electric 12.09-

View part

BLUE PRINT MacPherson strut mount ADBP800705

MacPherson strut mount front L/R fits: HONDA CIVIC X 1.0-1.6LPG 09.15-12.22

View part

BLUE PRINT Engine mount ADBP800706

Engine mount L/R, hydraulic fits: TOYOTA LAND CRUISER, LAND CRUISER PRADO 2.8D/3.0D 09.02-

View part

BLUE PRINT Shock absorber assembly kit ADBP800707

Shock absorber assembly kit front fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.6 09.02-

View part

BLUE PRINT Front track control arm silent block ADBP800708

Front track control arm silent block L/R (12x35x60 mm) fits: DAIHATSU CUORE VI 1.0 05.03-

View part

BLUE PRINT Front track control arm silent block ADBP800709

Front track control arm silent block L/R (12x58x62 mm) fits: DAIHATSU CUORE VI 1.0 05.03-

View part

BLUE PRINT Rear wishbone silent block ADBP800710

Rear track control arm silent block (outer rear) fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26), Z4 (G29) 1.6-3.0H 11.18-

View part

BLUE PRINT Rear wishbone silent block ADBP800711

Rear track control arm silent block L/R (inner rear) fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26), Z4 (G29) 1.6-3.0H 11.18-

View part

BLUE PRINT Front track control arm silent block ADBP800712

Front track control arm silent block L/R (17x56x82 mm) fits: TOYOTA HILUX VII, HILUX VIII 2.4D-3.0D 03.05-

View part

BLUE PRINT Rear wishbone silent block ADBP800714

Rear track control arm silent block L/R (bottom rear) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 12.06-07.18

View part

BLUE PRINT Shock absorber assembly kit ADBP800715

Shock absorber assembly kit front fits: SUZUKI S-CROSS, SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

BLUE PRINT Front track control arm silent block ADBP800716

Front track control arm silent block L/R (14x42x54 mm) fits: MAZDA 2, CX-3 1.5-2.0 08.14-

View part

BLUE PRINT Stabilizer bar bushing ADBP800717

Stabilizer bar bushing front L/R (20mm) fits: NISSAN ALMERA, NOTE, VERSA II 1.2-1.6ALK 08.11-

View part

BLUE PRINT Engine mount ADBP800718

Engine mount rear R, rubber-metal fits: TOYOTA AURIS, COROLLA 1.33-1.8 01.02-08.19

View part

BLUE PRINT Shock absorber bumper ADBP800719

Shock absorber bumper front L/R (height 103mm) fits: NISSAN QASHQAI III, ROGUE, X-TRAIL IV RENAULT AUSTRAL, ESPACE VI 1.2H-1.5H 06.20-

View part

BLUE PRINT Rear suspension beam silent block ADBP800720

Rear suspension beam silent block (Middle) fits: SUBARU CROSSTREK, FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK, XV 1.5-3.6 09.03-

View part

BLUE PRINT Engine mount ADBP800721

Engine mount from gearbox side L, rubber-metal fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12

View part

BLUE PRINT Propeller shaft support ADBP800722

Propeller shaft support (30mm, with a bearing) fits: TOYOTA FORTUNER, HILUX VI, HILUX VII, TACOMA 2.4D-4.0 08.97-

View part

BLUE PRINT Rear wishbone silent block ADBP800723

Rear track control arm silent block L/R (bottom/inner/outer in the front/rear) fits: HYUNDAI I30, IONIQ KIA CEED, NIRO, NIRO I, PROCEED, SOUL III, XCEED 1.0-Electric 03.16-

View part

BLUE PRINT Rear wishbone silent block ADBP800724

Rear track control arm silent block L/R (bottom/inner in the back/rear) fits: SUBARU BRZ, CROSSTREK, FORESTER, IMPREZA, LEGACY III, LEGACY IV, LEGACY V, LEGACY VI, LEVORG, OUTBACK, WRX 1.5-3.6 10.98-

View part

BLUE PRINT MacPherson strut bearing ADBP800726

MacPherson strut bearing front L/R fits: LEXUS UX SUZUKI SWACE TOYOTA C-HR, COROLLA, COROLLA CROSS, PRIUS 1.2-Electric 10.16-

View part

BLUE PRINT MacPherson strut bearing ADBP800727

MacPherson strut bearing front L/R fits: TOYOTA AVENSIS, HIGHLANDER / KLUGER, RAV 4 III 1.6-3.5 11.05-11.19

View part

BLUE PRINT MacPherson strut bearing ADBP800728

MacPherson strut bearing front L/R fits: LEXUS NX II TOYOTA HIGHLANDER, RAV 4 V 2.5/2.5H/3.5 12.18-

View part

BLUE PRINT Stabilizer bar bushing ADBP800729

Stabilizer bar bushing front R (23mm) fits: TOYOTA VERSO 1.6-2.2D 04.09-08.18

View part

BLUE PRINT Engine mount ADBP800730

Engine mount rear, bottom, rubber-metal fits: MG MG 3, ZS 1.5 04.11-

View part

BLUE PRINT Transmission mount ADBP800731

Transmission mount L fits: MG ZS 1.5 10.17-

View part

BLUE PRINT Engine mount ADBP800732

Engine mount R, rubber-metal fits: MG ZS 1.5 10.17-

View part

BLUE PRINT Rear suspension beam silent block ADBP800733

Rear suspension beam silent block L/R fits: HYUNDAI I10 I, I10 II 1.0-1.2LPG 12.07-12.19

View part

BLUE PRINT Engine mount ADBP800734

Engine mount R, top, hydraulic fits: CITROEN C4 GRAND PICASSO I, C4 GRAND PICASSO II, C4 PICASSO II, JUMPY III, SPACETOURER FIAT SCUDO OPEL VIVARO C, ZAFIRA LIFE 1.5D/1.6/1.6D 09.10-

View part

BLUE PRINT MacPherson strut mount ADBP800735

MacPherson strut mount front L/R (with a bearing) fits: HONDA CIVIC X 1.0-1.6LPG 09.15-12.22

View part

BLUE PRINT Engine mount ADBP800737

Engine mount front, rubber-metal fits: MITSUBISHI ECLIPSE CROSS, OUTLANDER III 2.0H/2.4H 01.14-

View part

BLUE PRINT Rear wishbone silent block ADBP800738

Rear track control arm silent block L/R (bottom/outer in the front/rear) fits: VOLVO S60 III, S90 II, V60 II, V90 II, XC60 II, XC90 II POLESTAR POLESTAR 1 2.0-2.0H 09.14-

View part

BLUE PRINT MacPherson strut mount ADBP800740

MacPherson strut mount front L/R (with a bearing) fits: LEXUS UX SUZUKI SWACE TOYOTA C-HR, COROLLA 1.2-Electric 10.16-

View part

BLUE PRINT Propeller shaft support ADBP800741

Propeller shaft support (32mm, with a bearing) fits: TOYOTA HILUX VIII 2.4D/2.7/2.8D 05.15-

View part

BLUE PRINT Engine mount ADBP800743

Engine mount rear, rubber-metal fits: MAZDA 2, CX-3 1.5-2.0 08.14-

View part

BLUE PRINT Differential brackets ADBP800744

Differential brackets middle L/R (13x56x) fits: FIAT FULLBACK MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II 2.2D-3.2D 11.05-

View part

BLUE PRINT MacPherson strut mount ADBP800745

MacPherson strut mount rear R fits: NISSAN MICRA IV, VERSA II 1.2/1.6 05.10-

View part

BLUE PRINT MacPherson strut mount ADBP800746

MacPherson strut mount front L/R fits: SUZUKI S-CROSS, SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

BLUE PRINT MacPherson strut mount ADBP800747

MacPherson strut mount front L/R (with a bearing) fits: NISSAN MICRA IV, NOTE, VERSA II 1.2/1.6 05.10-

View part

BLUE PRINT Engine mount ADBP800748

Engine mount R, bottom, hydraulic fits: KIA SPORTAGE IV 1.6D-2.4 09.15-

View part

BLUE PRINT Front track control arm silent block ADBP800749

Front track control arm silent block in the front L/R (14x42x65 mm) fits: TOYOTA AYGO X, C-HR, PRIUS PHV, YARIS, YARIS CROSS 1.0-2.0H 01.16-

View part

BLUE PRINT Shock absorber bumper ADBP800750

Shock absorber bumper rear L/R (height 130mm) fits: NISSAN INTERSTAR, NV400 OPEL MOVANO B RENAULT MASTER III 2.3D/Electric 02.10-

View part

BLUE PRINT Shock absorber bumper ADBP800751

Shock absorber bumper rear L/R (height 110mm) fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, PROCEED, XCEED 1.0-Electric 10.15-

View part

BLUE PRINT Rear wishbone silent block ADBP800753

Rear track control arm silent block L/R (top rear) fits: VOLVO XC40 LYNK & CO 01 1.5-Electric 10.17-

View part

BLUE PRINT Stabilizer bar bushing ADBP800754

Stabilizer bar bushing front L/R (25mm) fits: SUZUKI ACROSS TOYOTA CAMRY, RAV 4 V 2.0-3.5 08.17-

View part

Buying with Partios

Buying BLUE PRINT parts through Partios

Are these genuine BLUE PRINT parts?

Yes. Every BLUE PRINT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source BLUE PRINT parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for BLUE PRINT lines that aren't currently available.

Do you supply BLUE PRINT parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on BLUE PRINT parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a BLUE PRINT order?

It depends on the line. Stocked BLUE PRINT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for BLUE PRINT parts?

No. There's no minimum order value or quantity on a Partios trade account. Some BLUE PRINT lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account