Partios Wholesale catalogue

Vigor Supplier | Parts

Steering and suspension system pullers (66) · Garage worktop (32) · Garage furniture accessories (29) · Furniture modules (26) · Sockets set (19) · Brake system handling tools (16) · Ratchet handles (14) · Holders (13) · 70 further part types (202)

463 current catalogue lines

About the VIGOR range

Vigor is a multi-system brand rather than a single-product one: the range Partios carries runs to 463 lines across 78 distinct part types. The largest groups are steering and suspension system pullers (66), garage worktop (32), garage furniture accessories (29), furniture modules (26) and sockets set (19). Beyond those, 229 lines are spread across 72 further part types. That tail includes ratchet handles, holders and tool trolley with equipment. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 463 lines this is a focused range rather than a full programme.

Catalogue products

Vehicle references are indicative — confirm against the article number.

VIGOR Steering and suspension system pullers V4629

Puller universal, for bearing/s / to hub,

View part

VIGOR Insert tray with tools for trolley V4632

Empty insert tray for trolley number of tools: 0 szt.,

View part

VIGOR Elementy złączne i montażowe V4635

Adaptor - set, for puller, intended use (parts, components): for metal-rubber bushes, diameter: 44 / 63 mm, load: 32 t

View part

VIGOR Steering and suspension system pullers V4636N

Puller separator, for bearing/s, diameter: 33 / 60mm,

View part

VIGOR Special pliers V4637N

Pliers special for band clips / for clamping rings, length: 590mm

View part

VIGOR Special pliers V4640

Pliers clamping for water/fuel pipe terminals, straight

View part

VIGOR Axle joints service V4642

Puller disassembly, for CV joint, max diam: 105mm, length: 245

View part

VIGOR Wire brush V4646

Wire brush, set 38 pcs, material: nylon, for surface cleaning, for injector sockets / for injectors

View part

VIGOR Inspection and pick-up tools V4663

Inspection tools set

View part

VIGOR Steering and suspension system pullers V4680

Puller hydraulic, for bearing/s / to hub,

View part

VIGOR Brake system handling tools V4697

Device, diameter: 4,75 mm

View part

VIGOR Oil fillers V4701

Oil filler manual, capacity 0,1l

View part

VIGOR Special pliers V4737

Pliers special for fuel hoses connectors, length: 590mm

View part

VIGOR Air impact wrench V4800

Impact wrench, external square 1/2", 1200 Nm, 7500 rev./min., air consumption: 184 l/min., weight: 2,1 kg, wrench length: 185 mm

View part

VIGOR Impact tools operational accessories V4800-013

Switch for an impact wrench :, for product (ref. no): VIGOR V4800

View part

VIGOR Air impact wrench V4800A

Impact wrench, external square 1/2", 1650 Nm, 8500 rev./min., air consumption: 198 l/min., weight: 2,1 kg, wrench length: 185 mm

View part

VIGOR Air impact wrench V4801

Impact wrench, external square 1/2", 1800 Nm, working torque 850 Nm, air consumption: 198 l/min., weight: 2 kg

View part

VIGOR Impact tools operational accessories V4801-010/3

Mandrel for an impact wrench : 1/2, for product (ref. no): VIGOR V4801

View part

VIGOR Empty tool trolley/box V4813

Tool trolley/box, number of all drawers: 8, colour: black/grey, width: 907mm, depth: 480mm, height: 990mm

View part

VIGOR Socket driver V4883

Handle, 3/4 inch, swivel, length: 990 mm

View part

VIGOR Lifting bucket V4885

Bar for levering, for panels / for pins / for upholstery, bent, set: 3 pcs

View part

VIGOR Induction devices V4891-1.5

Induction heater, voltage: 230V, 1,5 kW / 1,5 kW, type of cooling: air

View part

VIGOR Induction devices V4891-3.5

Induction heater Truck 3.5 KW, voltage: 230V / 3,5 kW, type of cooling: liquid coolant

View part

VIGOR Induction devices parts and accessories V4891-3.5-2

Side induction coil, application - devices: for heater

View part

VIGOR Induction devices V4891-3.7

Induction heater, voltage: 230V, 3,7 kW / 3,7 kW, type of cooling: liquid coolant

View part

VIGOR Induction devices parts and accessories V4891-3.7-1

Inductive coil, application - devices: for heater

View part

VIGOR Induction devices parts and accessories V4891-3.7-2

Inductive coil, application - devices: for heater, fits V4891-3.7

View part

VIGOR Axle joints service V4904

Puller disassembly, for half-axles

View part

VIGOR Steering and suspension system pullers V4906

Puller - set handscrew hydraulic, assembly / disassembly, for bearing/s, load: 16t,

View part

VIGOR Steering and suspension system pullers V4906N

Puller - set handscrew hydraulic, assembly / disassembly, for bearing/s, load: 16t,

View part

VIGOR Steering and suspension system pullers V4906N-XL

set: puller handscrew hydraulic, 36 pcs, for bearing/s

View part

VIGOR Elementy złączne i montażowe V4908

Adaptor - set, for puller, intended use (parts, components): for bearing/s fits: AUDI FORD MAZDA SEAT SKODA VOLVO VW

View part

VIGOR Ratchet handles V4914

Handle / Rachet, 1/4 inch, profile: square, length: 175 mm, kind: joint pocket size rattle head, rotating > 180°

View part

VIGOR O-ring pliers V4921N

Pliers for circlips

View part

VIGOR Fuel system maintenance special tools V4941N

Injector seat cleaning - mill kit

View part

VIGOR Ratchet handles V4944

Handle / Rachet, 1/4 inch, profile: square, number of teeth: 72, length: 200 mm

View part

VIGOR Ratchet handles V4944-S

Handle / Rachet, 1/4 inch, profile: square, number of teeth: 72, length: 150 mm

View part

VIGOR Ratchet handles V4944-XS

Handle / Rachet, 1/4 inch, profile: square, number of teeth: 72, length: 95 mm

View part

VIGOR Ratchet handles V4946-S

, 1/2 inch, number of teeth: 72, length: 250 mm

View part

VIGOR Open end and box spanners V4961

Ratchet combination wrench 12-angle / U, 21 mm straight, length: 275 mm, 1 pcs

View part

VIGOR Open end and box spanners V4963

Ratchet combination wrench 12-angle / U, 24 mm straight, length: 296 mm, 1 pcs

View part

VIGOR Insert tray with tools for trolley V4970

Insert tray with tools for trolley, extension bar(s) / ratchet(s) / reduction/s socket / drive: 1/2 1/4 3/8",, 17pcs,

View part

VIGOR Tools kits V5010/12

Set of tools 12 pcs, socket / drive: 1/4",, profile: flat / Phillips PH, 10 3,5 5 6 8 mm, philips size: PH0 PH1 PH2 PH3 PH4, packaging: plastic suitcase

View part

VIGOR Sockets set V5024

Sockets set 3/4" impact (homogenous), 4 pcs, profile: 12-angle, socket size: 24 30 32 36 mm, to hub

View part

VIGOR Steering and suspension system pullers V5027

Puller for puller, to hub

View part

VIGOR Inspection and pick-up tools V5045

Inspection tools set bent straight , length:. 260 mm

View part

VIGOR Fuel system maintenance special tools V5048

Wrench, for fuel level gauge

View part

VIGOR Elementy złączne i montażowe V5066

Adaptor - set, for puller, intended use (parts, components): for bearing/s

View part

Buying with Partios

Buying VIGOR parts through Partios

Are these genuine VIGOR parts?

Yes. Every VIGOR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source VIGOR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for VIGOR lines that aren't currently available.

Do you supply VIGOR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on VIGOR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a VIGOR order?

It depends on the line. Stocked VIGOR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for VIGOR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some VIGOR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account