Partios Wholesale catalogue

Timken Distributor | Bearings & Seals

Industrial bearing (1,156) · Bearing set (51) · Wheel bearing (49) · Wheel bearing kit (16) · Bearing elements (7) · Bearing inner ring (7) · Wheel hub (5) · Bearing washer (4) · 18 further part types (30)

1,463 current catalogue lines

About the TIMKEN range

Timken’s range at Partios is bearings & seals, and it is concentrated: 1,156 of the 1,463 lines carried sit under one part type, industrial bearing. Behind it the largest groups are bearing set (51), wheel bearing (49), wheel bearing kit (16), bearing elements (7) and bearing inner ring (7). Those six account for most of the catalogue; the remaining 39 lines are spread across 20 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes wheel hub, bearing washer and wheel hub repair kit. Buyers are typically workshops, engineering factors and exporters; bearings and seals are dimension-led orders, often bought against a specification rather than a vehicle. The 1,463 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

TIMKEN Industrial bearing GE55KRRB

Bearing 55x100x71,4 self-adjusting bearing (with off-centre grommets), JOHN DEERE 650, 670, 9540 WTS, 9560 WTS, 9580 WTS, 9640 WTS, 9660 WTS, 9680 WTS, 9780 CTS, 540, 550, 560, 660

View part

TIMKEN Industrial bearing GE60-ES-2RS /TIMKEN/

Bearing 60x90x44 slide, swivel fits: JOHN DEERE 105, 110, 115, 125, 130, 140, 145, 150, 155, 165, 1654, 175, 180, 185, 1854, 195, 200, 210, 2104, 220, 230, 240, 95, 6R 230, 6R 2304, 6R 250

View part

TIMKEN Industrial bearing GE70ES-2RS AURORA

Bearing 70x105x49 slide, swivel

View part

TIMKEN Industrial bearing GN211KRRB + COL /TIMKE

Bearing 68,263x150x88,9 self-adjusting bearing (with a greasing hole)

View part

TIMKEN Industrial bearing GRAE15RRB+COL

Bearing 15x40x28,6 self-adjusting bearing (with fitting screws)

View part

TIMKEN Industrial bearing GRAE17RRB+COL

Bearing 17x40x28,6 self-adjusting bearing (with off-centre grommets)

View part

TIMKEN Industrial bearing GRAE20RRB+COL /TIMKEN/

Bearing 20x47x31 self-adjusting bearing (with off-centre grommets), JOHN DEERE 1165, 1170, 1175, 1185

View part

TIMKEN Industrial bearing GRAE25RRB+COL

Bearing 25x52x31 self-adjusting bearing (with off-centre grommets) fits: CASE CLAAS DEUTZ JOHN DEERE MASSEY FERGUSON NEW HOLLAND

View part

TIMKEN Industrial bearing GRAE30RRB+COL

Bearing 30x62x35,8 self-adjusting bearing (with off-centre grommets), FENDT 8350, 8370P, 8380P, 8400P, 9470X CLAAS 58, 675, 680, 540, 540 C, 550, 560, 570, 580, 202, 203, 204, 218, 350, 360

View part

TIMKEN Industrial bearing GRAE35RRB+COL

Bearing 35x72x39 self-adjusting bearing (with off-centre grommets)

View part

TIMKEN Industrial bearing GRAE40RRB+COL

Bearing 40x80x43,8 self-adjusting bearing (with off-centre grommets)

View part

TIMKEN Industrial bearing GRAE45RRB+COL

Bearing 45x85x43,8 self-adjusting bearing (with off-centre grommets) fits: CLAAS

View part

TIMKEN Industrial bearing GRAE50RRB+COL

Bearing 50x90x43,8 self-adjusting bearing (with off-centre grommets) fits: CLAAS

View part

TIMKEN Industrial bearing GRAE55RRB+COL

Bearing 55x100x48,4 self-adjusting bearing (with off-centre grommets)

View part

TIMKEN Industrial bearing GRAE60RRB+COL

Bearing 60x110x53,1 self-adjusting bearing (with off-centre grommets)

View part

TIMKEN Bearing set GRFDR1 1/2 L/C

12,7x81 bearing set (4 holes)

View part

TIMKEN Bearing sleeve H 207

30x52x29 bearing sleeve pulled in bush,nut

View part

TIMKEN Bearing sleeve H 3128

125x180x97 bearing sleeve pulled in bush

View part

TIMKEN Bearing sleeve H212

55x80x38 bearing sleeve,nut retracted

View part

TIMKEN Bearing sleeve H2309

40x65x50 bearing sleeve pulled in bush,nut

View part

TIMKEN Bearing sleeve H3136

160x180x131 bearing sleeve pulled in bush

View part

TIMKEN Industrial bearing H715340-90012

Bearing 65,08x136,525x98,425 conical (inch inner ring rounding max 3.5 mm rounding of the outer ring separator)

View part

TIMKEN Industrial bearing H715340-90013

Bearing 65,08x136,525x193,675 conical (inch inner ring rounding max 3.5 mm rounding of the outer ring with a greasing hole)

View part

TIMKEN Industrial bearing H715340-99402

Bearing 65,088x136,525x46,038 conical (inch inner ring rounding max 3.5 mm rounding of the outer ring)

View part

TIMKEN Industrial bearing HH221449-99401

Bearing 101,6x190,5x57,15 conical

View part

TIMKEN Cone outer ring HH228318

Outer ring of a cone bearing width: 61,912, outer diameter: 259,975

View part

TIMKEN Bearing inner ring HH228340

120,65x82,55 bearing inner ring inch

View part

TIMKEN Industrial bearing HH228340/HH228318

Bearing 120,65x259,975x77,788 conical (inch inner ring radius: max. 9.70 mm Outer ring radius: max. 4 mm)

View part

TIMKEN Industrial bearing HH249949/10

Bearing 247,65x406,4x115,888 conical (inch)

View part

TIMKEN Industrial bearing HM 88542/510

Bearing 31,75x73,025x29,37 conical (inch)

View part

TIMKEN Industrial bearing HM 89449/410

Bearing 36,51x76,2x29,37 conical (inch) fits: FENDT 818 FAVORIT, 822 FAVORIT, 824 FAVORIT, 916 FAVORIT, 920 FAVORIT, 924 FAVORIT, 926 FAVORIT JCB 3CX, 4CX

View part

TIMKEN Wheel bearing HM 89449/411

View part

TIMKEN Industrial bearing HM124649-90934

Bearing 120x195x131,35 conical, double-rowed (inch)

View part

TIMKEN Industrial bearing HM127442-90196

Bearing 129,972x209,88x125,908 conical, double-rowed

View part

TIMKEN Industrial bearing HM127442-90957

Bearing 130x184,5x135 conical, double-rowed (inch)

View part

TIMKEN Industrial bearing HM127442-90962

Bearing 130x210x135 conical, double-rowed (inch)

View part

TIMKEN Industrial bearing HM127442-HM127415

Bearing 129,967x207,963x53,978 conical (inch)

View part

TIMKEN Industrial bearing HM129843-90942

Bearing 140x220x140 conical, double-rowed (inch)

View part

TIMKEN Industrial bearing HM129843-90944

Bearing 140x220x140 conical, double-rowed (inch)

View part

TIMKEN Industrial bearing HM129843-90946

Bearing 140x220x140 conical, double-rowed (inch)

View part

TIMKEN Industrial bearing HM212049-9X021

Bearing 66,675x122,238x38,354 conical (inch)

View part

TIMKEN Industrial bearing HM518445/410

Bearing 88,9x147,1x39,688 conical

View part

TIMKEN Industrial bearing HM801346/10

Bearing 38,1x82,55x29,37 conical (inch)

View part

TIMKEN Industrial bearing HM801346X/10 /TIMKEN/

Bearing 38,1x82,55x29,37 conical (inch)

View part

TIMKEN Industrial bearing HM801349-HM801310

Bearing 40,483x82,55x29,37 conical (inch)

View part

TIMKEN Industrial bearing HM803146/10 /TIMKEN/

Bearing 41,275x88,9x30,162 conical (inch)

View part

TIMKEN Industrial bearing HM803149-99407

Bearing 44,45x88,9x30,16 conical (inch) fits: AGCO AGRALE CASE CATERPILLAR FAUN HYUNDAI IVECO JCB JOHN DEERE KOMATSU NEOPLAN NEW HOLLAND SAME VALTRA VOLVO

View part

TIMKEN Industrial bearing HM804846/HM804810

Bearing 47,625x95,25x29,37 conical (inch) fits: AGRO

View part

Buying with Partios

Buying TIMKEN parts through Partios

Are these genuine TIMKEN parts?

Yes. Every TIMKEN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source TIMKEN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TIMKEN lines that aren't currently available.

Do you supply TIMKEN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on TIMKEN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a TIMKEN order?

It depends on the line. Stocked TIMKEN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for TIMKEN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some TIMKEN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account