Partios Wholesale catalogue
Tedgum Distributor | Suspension & Steering
Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)
5,984 current catalogue lines
About the TEDGUM range
Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
TEDGUM Engine mount TED70109
Engine mount from gearbox side L, hydraulic fits: VW PASSAT B6, PASSAT B7 1.4/1.6 03.05-12.14
View partTEDGUM Shock absorber silent block TED70143
Shock absorber bushing rear L/R fits: CHEVROLET CRUZE OPEL ASTRA J, ASTRA J GTC, CASCADA 1.3D-2.0D 05.09-
View partTEDGUM Propeller shaft support TED70265
Propeller shaft support (30mm) fits: MERCEDES MARCO POLO CAMPER (W447), V (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 2.0-2.2D 03.14-
View partTEDGUM Shock absorber assembly kit TED70269
Shock absorber assembly kit front fits: VW AMAROK 2.0/2.0D/3.0D 09.10-
View partTEDGUM Engine mount insert TED70420
Engine mount insert R bottom 65 10 fits: CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4, C4 I PEUGEOT 206, 307 1.4/1.6/1.6ALK 08.00-
View partTEDGUM Front track control arm silent block TED70424
Front track control arm silent block rear L/R (15x40x34/48 mm) fits: MITSUBISHI L200 / TRITON 2.5D 11.05-12.15
View partTEDGUM Propeller shaft support TED70563
Propeller shaft support (30mm, with a bearing) fits: AUDI Q7 3.0 01.15-12.19
View partTEDGUM Wheel suspension track control arm, front TED70568
Front axle track control arm L bottom front fits: HONDA CIVIC X 1.0-2.0 09.15-
View partTEDGUM Engine mount TED70595
Engine mount front R, hydraulic fits: CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4, C4 GRAND PICASSO I, C4 I, C4 II, C4 PICASSO I, DS4 1.4/1.6/1.6LPG 09.07-
View partTEDGUM Polyurethane suspension sleeve TED70630
Rear axle bushing (L/R, hardness: 90 Sha, inner diameter 12mm, outer diameter 49mm) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 06.04-12.13
View partTEDGUM Shock absorber assembly kit TED70678
Shock absorber assembly kit front fits: LEXUS RX TOYOTA ALPHARD I, HIGHLANDER / KLUGER, PREVIA II, VENZA 2.0D-3.5H 02.00-11.16
View partTEDGUM Differential brackets TED70760
Differential brackets silent block rear L/R (12x62x27mm) fits: MAZDA CX-7 2.2D/2.3/2.5 06.06-12.14
View partTEDGUM Front track control arm silent block TED70780
Front track control arm silent block L/R (14x56) fits: TOYOTA FORTUNER, HILUX VII 2.5D-4.0 06.04-
View partTEDGUM Drive shaft flexible joint TED70809
Propeller shaft elastic coupling rear (outer diameter 145mm) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), 5 (E61), 5 (F10), 5 (F11) 2.0-4.4 07.01-10.18
View partTEDGUM Polyurethane suspension sleeve TED70810
Polyurethane bushing, 1pcs, control rod, external/for body/inside/to differential, hardness: 90 Sha, fits: SUZUKI JIMNY 1.3/1.5D 09.98-
View partTEDGUM Propeller shaft support TED70820
Propeller shaft support (32mm, with a bearing, rear axle) fits: TOYOTA HILUX VIII 2.4D/2.8D 05.15-
View partTEDGUM Stabilizer bar bushing TED70870
Stabilizer bar bushing front inner L/R (26mm) fits: MITSUBISHI LANCER VII, OUTLANDER I 1.3-2.4 06.00-12.13
View partTEDGUM Front track control arm silent block TED70917
Front track control arm silent block in the back L/R (16x66) fits: FORD TOURNEO CUSTOM V362, TRANSIT CUSTOM V362, TRANSIT V363 1.0H-2.2D 09.12-
View partTEDGUM Engine mount TED70961
Engine mount in the front L, rubber-metal fits: CHEVROLET SPARK 1.0-1.2LPG 03.10-
View partTEDGUM Front wishbone assembly TED71198
Suspension track control arm set front fits: BMW 5 (E60), X5 (E70), X5 (F15, F85), X6 (E71, E72), X6 (F16, F86) 2.0-4.8 10.06-07.19
View partTEDGUM MacPherson strut mount TED71315
MacPherson strut mount front L/R fits: HONDA CITY, CITY IV, CITY V, CR-Z, INSIGHT, JAZZ II, JAZZ III 1.2-1.5H 03.02-
View partTEDGUM Propeller shaft support TED71379
Propeller shaft support (45mm, with a bearing) fits: DAF 400, 400-SERIE LDV CONVOY OPEL FRONTERA A 2.2-2.8D 04.89-04.09
View partTEDGUM Rear wishbone silent block TED71380
Rear track control arm silent block L/R (in the front/rear) fits: ALFA ROMEO 159, BRERA 1.8-3.2 06.05-12.12
View partTEDGUM Shock absorber bolt TED71455
Shock absorber bolt front L/R (with a nut with washer) fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 2.3D-3.0D 01.89-
View partTEDGUM Engine mount TED71470
Engine mount L/R, bottom, hydraulic fits: MERCEDES E (A207), E (C207) 1.8/2.0 01.09-12.16
View partTEDGUM Propeller shaft support TED71511
Propeller shaft support (30mm, with a bearing) fits: PORSCHE PANAMERA 4.8 09.09-07.13
View partTEDGUM Propeller shaft support TED71521
Propeller shaft support (30mm, with a bearing) fits: MERCEDES MARCO POLO CAMPER (W447), V (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 2.0-2.2D 03.14-
View partTEDGUM Shock absorber bolt TED71590
Shock absorber bolt (3 pcs.) fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0D-3.0D 04.06-
View partTEDGUM Shock absorber silent block TED71609
Shock absorber bushing rear L/R fits: TOYOTA YARIS, YARIS / VIOS 1.0-1.8 01.05-06.20
View partTEDGUM Front suspension beam silent block TED71615
Front suspension beam silent block (front/in the back) fits: NISSAN CUBE, MICRA C+C III, MICRA III, NOTE, TIIDA RENAULT CLIO III, GRAND SCENIC II, MEGANE II, MODUS, SCENIC II 1.0-2.0D 03.02-
View partTEDGUM Polyurethane suspension sleeve TED71645
Sliding roof mounting, 1pcs, fits: FIAT PANDA 0.65-1.3D 10.80-07.04
View partTEDGUM Spring disc front/rear TED71740
Spring disc bottom/rear L/R (height: 50mm) fits: HONDA CIVIC VIII 1.4-2.2D 09.05-01.12
View partTEDGUM Shock absorber dust cover TED71780
Shock absorber dust cover, front (no buffer) fits: MAZDA 626 III, 626 IV 1.6-2.5 06.87-09.97
View partTEDGUM Stabilizer bar bushing TED71781
Stabilizer bar bushing front inner L/R (24mm) fits: VOLVO S60 I, XC70 I 2.0-2.5 11.97-04.10
View partTEDGUM Track control arm fitting elements TED71894
Track control arm fitting elements L/R bottom/inside/rear fits: HONDA ACCORD VII 2.0/2.2D/2.4 02.03-05.08
View partTEDGUM Rear wishbone silent block TED71980
Rear track control arm silent block L/R (outer/top rear) fits: DODGE JOURNEY 2.0D-3.6ALK 06.08-
View partTEDGUM Suspension fitting elements TED71988
Suspension mounting elements (Track control arm bolt) front/rear L/R fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-02.13
View partTEDGUM MacPherson strut mount TED72107
MacPherson strut mount rear L/R fits: TOYOTA AURIS, PRIUS, PRIUS PHV, PRIUS PLUS 1.8H 04.09-
View partTEDGUM Front track control arm silent block TED72115
Front track control arm silent block L (20,9) fits: ALFA ROMEO 147, 156 FIAT MULTIPLA LANCIA LYBRA 1.6-3.2 02.97-06.10
View partTEDGUM Engine mount TED72129
Engine mount front/rear L, bottom, rubber-metal fits: NISSAN QASHQAI I 1.5D/1.6D/2.0D 11.06-04.14
View partTEDGUM MacPherson strut mount TED72176
MacPherson strut mount front L/R (with a bearing) fits: KIA SORENTO III 2.0D-3.5 01.15-12.20
View partTEDGUM Engine mount TED72231
Engine mount R, hydraulic fits: BMW 5 (G30, F90), 7 (G11, G12) 2.0H 07.16-06.23
View partTEDGUM Engine mount TED72237
Engine mount front L, hydraulic fits: MERCEDES C (W203), CLK (C208), E (W210), E (W211), SLK (R171) 1.8-3.2 03.96-02.11
View partTEDGUM Propeller shaft support TED72239
Propeller shaft support (30mm) fits: ALFA ROMEO 159 2.4D/3.2 12.05-11.11
View partTEDGUM Polyurethane suspension sleeve TED72265
Polyurethane stabilizer bushing, stabilizer, front, hardness: 80 Sha, fits: JEEP CHEROKEE 2.1D-4.2 10.83-09.01
View partTEDGUM Polyurethane suspension sleeve TED72340
Polyurethane stabilizer bushing (1pcs, front stabilizer, inside, hardness: 70 Sha, inner diameter 18mm) fits: MERCEDES PONTON (W120), PONTON (W121) 07.53-12.62
View partTEDGUM Transmission mount TED72370
Transmission mount bottom/from gearbox side/on engine side L (manual) fits: OPEL ASTRA K 1.0-1.4CNG 06.15-09.21
View partTEDGUM Coil spring washer TED72380
Coil spring washer rear (L/R, bottom) (polyurethane) fits: DACIA DUSTER RENAULT CAPTUR I, CLIO IV, ZOE 04.10-
View partBuying with Partios
Buying TEDGUM parts through Partios
Are these genuine TEDGUM parts?
- Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source TEDGUM parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.
Do you supply TEDGUM parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on TEDGUM parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a TEDGUM order?
- It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for TEDGUM parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account