Partios Wholesale catalogue

Tedgum Distributor | Suspension & Steering

Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)

5,984 current catalogue lines

About the TEDGUM range

Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

TEDGUM Polyurethane suspension sleeve 01167611

Track control arm silent block (trailing arm, L/R, hardness: 80 Sha, inner diameter 12mm, outer diameter 52mm) fits: LAND ROVER FREELANDER I 02.98-10.06

View part

TEDGUM Polyurethane suspension sleeve 01167618

Polyurethane bushing, 1pcs, trailing arm, L/R, rear, hardness: 80 Sha, fits: LAND ROVER FREELANDER I 1.8/2.0D/2.5 02.98-10.06

View part

TEDGUM Polyurethane suspension sleeve 01167958

Track control arm silent block (L/R, hardness: 80 Sha, inner diameter 12mm, outer diameter 60mm) fits: LAND ROVER FREELANDER I 02.98-10.06

View part

TEDGUM Polyurethane suspension sleeve 01167973

Polyurethane bushing, 1pcs, trailing arm, L/R, front, hardness: 90 Sha, fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I, RANGE ROVER III 2.0-4.4 07.70-02.16

View part

TEDGUM Polyurethane suspension sleeve 01168026

Polyurethane bushing, 1pcs, transverse track control arm, L/R, hardness: 90 Sha, fits: LAND ROVER DISCOVERY I 2.0-4.0 06.89-12.98

View part

TEDGUM Propeller shaft support 01168236

Propeller shaft support (35mm) fits: BMW 5 (E39), 7 (E38), 8 (E31) LAND ROVER RANGE ROVER III 2.5D-5.6 01.90-08.12

View part

TEDGUM Propeller shaft support 01168247

Propeller shaft support (30mm, with a bearing) fits: LAND ROVER FREELANDER I 1.8/2.0D/2.5 02.98-10.06

View part

TEDGUM MacPherson strut bearing 01168906

MacPherson strut bearing front L/R fits: DS DS 3, DS 4, DS 5 CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C15 1.0-Electric 09.81-

View part

TEDGUM Front track control arm silent block 01169797

Front track control arm silent block L/R (14x52x58/68 mm) fits: LAND ROVER RANGE ROVER III 3.0D-5.0 03.02-08.12

View part

TEDGUM Front track control arm silent block 01211169

Front track control arm silent block front/inside L/R (12x40x35/45 mm) fits: INFINITI G 3.5 08.02-

View part

TEDGUM Stabilizer bar bushing 01214030

Stabilizer bar bushing front inner L/R (25mm) fits: INFINITI FX 3.5/4.5 01.03-12.08

View part

TEDGUM Stabilizer bar bushing 01215653

Stabilizer bar bushing front inner L/R (34mm) fits: INFINITI FX 3.5 07.08-07.13

View part

TEDGUM Stabilizer bar bushing 01216307

Stabilizer bar bushing rear inner L/R (27mm) fits: INFINITI FX 3.0D-5.0 02.03-

View part

TEDGUM Stabilizer bar bushing 01294590

Stabilizer bar bushing front inner L/R (21mm) fits: MINI (R50, R53), (R52), (R56), (R57), (R58), CLUBMAN (R55) 1.4-1.6D 06.01-06.15

View part

TEDGUM Stabilizer bar bushing 01294601

Stabilizer bar bushing rear inner L/R (16mm) fits: MINI (R50, R53), (R52), (R56), (R57), (R58), (R59), CLUBMAN (R55), CLUBVAN (R55), COUNTRYMAN (R60), PACEMAN (R61) 1.4-2.0D 06.01-10.16

View part

TEDGUM Front track control arm silent block 01367164

Front axle silentblock/wishbone mounting ROSENGART LR4 0.8 BENZ 1928->1937

View part

TEDGUM Leaf spring silent block 01367165

Front leaf spring bushing rear (lower) ROSENGART LR4 0.8 BENZ 1928->1937

View part

TEDGUM Torque arm silent block 01388587

Lateral control rod silentblock rear L/R

View part

TEDGUM Polyurethane suspension sleeve 01388588

Polyurethane shock absorber bushing, 1pcs, Rear shock absorber, L/R, bottom/top, hardness: 80 Sha,

View part

TEDGUM Engine mount 01409442

View part

TEDGUM Propeller shaft support 1TED98566

Propeller shaft support (rear axle) fits: BMW X3 (F25), X5 (F15, F85) 2.0D/3.0 10.12-07.18

View part

TEDGUM Transmission mount TED03610

Transmission mount bottom/rear L (manual) fits: FORD B-MAX, FIESTA, FIESTA V, FIESTA VI, FUSION MAZDA 2 1.2-2.0 11.01-01.18

View part

TEDGUM Shock absorber silent block TED10611

Shock absorber bushing L/R fits: HYUNDAI PONY MITSUBISHI L200, L200 / TRITON SUZUKI SAMURAI, SJ410, SJ413 TOYOTA CARINA II, CARINA III, CELICA, COROLLA, CRESSIDA, DYNA 1.0-4.2 06.74-

View part

TEDGUM Polyurethane suspension sleeve TED10612

Polyurethane shock absorber bushing, 1pcs, Rear shock absorber, bottom/rear/top, hardness: 80 Sha, fits: HYUNDAI PONY MITSUBISHI L200, L200 / TRITON SUZUKI SAMURAI, SJ410, SJ413 1.0-4.2 06.74-

View part

TEDGUM Stabilizer bar bushing TED10613

Stabilizer bar bushing rear inner L/R (30mm) fits: PEUGEOT 407 1.6D-3.0 03.04-

View part

TEDGUM Front track control arm silent block TED10616

Front track control arm silent block R (29x74x65/72 mm) fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

TEDGUM Rear wishbone silent block TED10617

Rear track control arm silent block L/R (in the back/rear, to hub) fits: CITROEN C5 III, C6 PEUGEOT 407, 407/KOMBI, 508 I, 508/KOMBI 1.6-3.0D 03.04-

View part

TEDGUM Shock absorber bumper TED10621

Shock absorber bumper rear L/R (height 65mm) fits: PEUGEOT 407 3FY(EW12J4)-XFV(ES9A) 03.04-

View part

TEDGUM Engine mount TED10622

Engine mount front R, hydraulic fits: MITSUBISHI LANCER VII 1.3/1.6 06.00-12.13

View part

TEDGUM Front track control arm silent block TED10623

Front track control arm silent block L/R (19 set) fits: MITSUBISHI L200 2.0/2.5D 06.96-12.07

View part

TEDGUM Front track control arm silent block TED10627

Front track control arm silent block in the front L/R (19 set) fits: MITSUBISHI L200 2.0/2.5D 06.96-12.07

View part

TEDGUM Spring cushion damper TED10629

Suspension spring fender rear L/R, fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0D-Electric 04.06-

View part

TEDGUM Engine mount TED10632

Engine mount from gearbox side/front, rubber-metal fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0/2.0D/2.7 06.04-12.10

View part

TEDGUM Leaf spring silent block TED10639

Silentblock/spring bush front/rear (14mm/40mm) fits: TOYOTA LAND CRUISER 4.2D 01.90-

View part

TEDGUM Rear wishbone silent block TED10644

Rear track control arm silent block L/R (top in the back/in the front/rear) fits: CITROEN C5 III, C6 PEUGEOT 407, 508, 508 I 1.6-3.0D 03.04-

View part

TEDGUM Front track control arm silent block TED10653

Front track control arm silent block L (29x74x65/72 mm) fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

TEDGUM Rear wishbone silent block TED10654

Rear track control arm silent block L/R (top rear, to hub) fits: CITROEN C5 III, C6 PEUGEOT 407, 508, 508 I 1.6-3.0D 03.04-

View part

TEDGUM Rear wishbone silent block TED10656

Rear track control arm silent block L/R (inner/outer in the back/in the front/rear) fits: CITROEN C5 III, C6 PEUGEOT 407, 508, 508 I 1.6-3.0D 03.04-

View part

TEDGUM Shock absorber silent block TED10662

Shock absorber bushing rear L/R fits: CITROEN C5 III, DS5 PEUGEOT 3008 I, 407, 508, 508 I, 508 II 1.2-3.0D 03.04-

View part

TEDGUM MacPherson strut mount TED10663

MacPherson strut mount front L/R (with a bearing) fits: HONDA CIVIC VIII 1.3H/1.8/1.8ALK 09.05-12.13

View part

TEDGUM Stabilizer bar bushing TED10667

Stabilizer bar bushing rear inner L/R (27mm) fits: AUDI Q7 PORSCHE CAYENNE VW TOUAREG 2.5D-6.0D 05.02-12.18

View part

TEDGUM Stabilizer bar bushing TED10668

Stabilizer bar bushing rear inner L/R (27mm) fits: AUDI Q7 PORSCHE CAYENNE VW TOUAREG 2.5D-6.0D 05.02-12.18

View part

TEDGUM MacPherson strut mount TED10670

MacPherson strut mount front/rear L/R fits: AUDI A4 B5, Q7 PORSCHE CAYENNE VW TOUAREG 1.6-6.0D 11.94-08.15

View part

TEDGUM Wheel suspension track control arm, rear TED10671

Rear axle track control arm L/R (bottom, rear, transverse, with sleeves) fits: AUDI Q7 VW TOUAREG 2.5D-6.0D 10.02-08.15

View part

TEDGUM Stabilizer bar sleeve TED10693

Rubber ring for stabilizing bar bottom/front/top L/R (12/36mm) fits: AUDI Q7 PORSCHE CAYENNE VW TOUAREG 2.5D-6.0D 05.02-12.18

View part

TEDGUM Polyurethane suspension sleeve TED10706

Stabilizer bar bushing (inner, L/R, hardness: 80 Sha, inner diameter 11mm) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E61) 03.04-12.13

View part

TEDGUM Main bearing cap bolt TED10720

Main bearing cap bolt fits: CITROEN JUMPER III FIAT DUCATO FORD TOURNEO CUSTOM V362, TRANSIT, TRANSIT CUSTOM V362, TRANSIT TOURNEO, TRANSIT V363 PEUGEOT BOXER 2.2D/2.4D 04.06-12.20

View part

TEDGUM Propeller shaft support TED10729

Propeller shaft support (30mm) fits: AUDI A8 D5 3.0H 06.17-

View part

Buying with Partios

Buying TEDGUM parts through Partios

Are these genuine TEDGUM parts?

Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source TEDGUM parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.

Do you supply TEDGUM parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on TEDGUM parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a TEDGUM order?

It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for TEDGUM parts?

No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account