Partios Wholesale catalogue
Tedgum Distributor | Suspension & Steering
Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)
5,984 current catalogue lines
About the TEDGUM range
Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
TEDGUM Shock absorber silent block 00442955
Shock absorber bushing rear L/R assembled to Bilstein absorber fits: MITSUBISHI PAJERO IV 3.2D/3.5/3.8 10.06-
View partTEDGUM MacPherson strut mount 00442956
MacPherson strut mount rear L/R fits: MITSUBISHI PAJERO IV 3.2D/3.5/3.8 10.06-
View partTEDGUM Rear suspension beam silent block 00442957
Rear suspension beam silent block (in the front) fits: MITSUBISHI PAJERO III, PAJERO IV 2.5D-3.8 04.00-
View partTEDGUM Leaf spring silent block 00443033
Front spring eye bushing (front = rear) MITSUBISHI, CANTER, FB43 / FE44 / FH100, 4D / 6D, 2.3-> 4.9, 86/03-> NOTES: FI-22
View partTEDGUM MacPherson strut mount 00443077
MacPherson strut mount front L fits: MITSUBISHI PAJERO III, PAJERO IV 2.5D-3.8 04.00-
View partTEDGUM Coil spring washer 00443087
Coil spring washer rear (bottom) fits: MITSUBISHI PAJERO CLASSIC, PAJERO III, PAJERO IV 04.00-
View partTEDGUM Torque arm silent block 00443104
Front control rod bushing (to the carbody) MITSUBISHI L 300 1.4->2.5 85-> // Front stringer bushing (front=rear,to the chassis) MITSUBISHI PAJERO 2.5->3.5 91->
View partTEDGUM Stabilizer bar bushing 00443376
Stabilizer bar bushing rear inner L/R (25mm) fits: MITSUBISHI PAJERO IV 3.2D/3.5/3.8 10.06-
View partTEDGUM Polyurethane suspension sleeve 00443442
Polyurethane spring washer, 1pcs, front spring, L/R, top, hardness: 90 Sha, fits: MITSUBISHI L200 2.0/2.5D 06.96-12.07
View partTEDGUM Front track control arm silent block 00443443
Front track control arm silent block in the back/in the front L/R (16x50x46/66 mm) fits: MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II, PAJERO SPORT III 2.2D-3.2D 06.96-
View partTEDGUM Stabilizer bar bushing 00443455
Stabilizer bar bushing front inner L/R (25mm) fits: MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II 2.5D/3.0 01.04-
View partTEDGUM Propeller shaft support 00443493
Propeller shaft support (30mm, with a bearing) fits: HYUNDAI GALLOPER II MITSUBISHI DELICA / SPACE GEAR, L200, PAJERO I, PAJERO II, PAJERO PININ I 1.6-2.8D 10.86-12.07
View partTEDGUM Engine mount 00443494
Engine mount front L, rubber-metal fits: MITSUBISHI L200, L200 / TRITON, PAJERO II, PAJERO SPORT I 2.4-3.5 11.86-
View partTEDGUM Front track control arm silent block 00443507
Front track control arm silent block L/R (14x46x36/52 mm) fits: MITSUBISHI L200 / TRITON, PAJERO SPORT II NISSAN X-TRAIL III 2.0D-3.5 11.05-
View partTEDGUM Shock absorber silent block 00443516
Shock absorber bushing front L/R fits: MITSUBISHI L200 2.0/2.5D 06.96-12.07
View partTEDGUM Propeller shaft support 00443621
SUPPORT SHAFT DRIVE SET. MITSUBISHI, CANTER, FB43 / FE44 / FH100, 4D / 6D, 2.3-> 4.9, 86/03->
View partTEDGUM Front track control arm silent block 00443679
Front track control arm silent block in the front L/R fits: MITSUBISHI PAJERO I 2.3D-3.0 12.82-12.91
View partTEDGUM Front track control arm silent block 00443685
Front track control arm silent block in the front L/R (x75x51 mm) fits: MITSUBISHI PAJERO I, PAJERO III, PAJERO IV 2.0-3.8 12.82-
View partTEDGUM Transmission mount 00443697
Transmission mount top fits: MITSUBISHI PAJERO SPORT I 2.5D 11.97-01.08
View partTEDGUM Transmission mount 00443698
Transmission mount bottom fits: MITSUBISHI PAJERO SPORT I 2.5D 11.97-01.08
View partTEDGUM Stabilizer bar bushing 00443709
Stabilizer bar bushing front inner/outer L/R (22mm) fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07
View partTEDGUM Rear wishbone silent block 00443740
Rear track control arm silent block L/R (inner/outer/top in the front/rear) fits: VOLVO S40 I, V40 MITSUBISHI CARISMA, COLT IV, COLT V, LANCER V, LANCER VI, LANCER VIII, SPACE STAR 1.3-2.0D 07.91-
View partTEDGUM Stabilizer bar bushing 00443826
Stabilizer bar bushing front inner L/R (17mm) fits: MITSUBISHI GALANT VIII 2.0-2.5 09.96-10.04
View partTEDGUM Stabilizer silent block 00443871
Stabilizer silentblock bottom/front L/R (19mm) fits: HYUNDAI ACCENT, ACCENT I MITSUBISHI COLT I 1.2-1.5 12.78-01.00
View partTEDGUM Engine mount insert 00443872
Engine mount insert R 92 12 fits: MITSUBISHI SPACE STAR 1.8 06.98-12.04
View partTEDGUM Front track control arm silent block 00443897
Front track control arm silent block L/R (18x60x49/55 mm) fits: MITSUBISHI 3000 GT, SIGMA 3.0 01.90-08.99
View partTEDGUM Front track control arm silent block 00444080
Front track control arm silent block in the front L/R (12x35x50 mm) fits: MITSUBISHI 3000 GT 3.0 01.90-08.99
View partTEDGUM Lateral control rod rubber ring 00444418
Lateral control rod rubber ring front L/R (27mm) fits: MITSUBISHI L200 / TRITON 11.05-12.15
View partTEDGUM Front track control arm silent block 00444428
Front track control arm silent block L/R (12x37) fits: HYUNDAI COUPE I, LANTRA I, LANTRA II MITSUBISHI COLT III, LANCER IV 1.3-2.0D 04.88-04.02
View partTEDGUM Stabilizer bar sleeve 00444470
Rubber ring for stabilizing bar front L/R (10/25 upper) fits: FORD MAVERICK HYUNDAI GALLOPER II, PONY, PONY / EXCEL, SONATA II, SONATA IV, XG KIA K2500, K2700, MAGENTIS I, OPIRUS 03.70-
View partTEDGUM Transmission mount insert 00444559
Transmission mount insert front/rear fits: HYUNDAI SONATA II, SONATA III, XG MITSUBISHI 3000 GT, ECLIPSE III 3.0 01.90-12.05
View partTEDGUM Engine mount insert 00444560
Engine mount insert in the back/in the front 88 16 metal / rubber fits: HYUNDAI SONATA II, SONATA III, XG KIA CERATO I MITSUBISHI 3000 GT, SIGMA 1.5D-3.0 01.90-12.09
View partTEDGUM Front track control arm silent block 00445074
Front track control arm silent block L/R (14x36) fits: MITSUBISHI GRANDIS 2.0D/2.4 04.04-12.11
View partTEDGUM Stabilizer bar bushing 00445094
Stabilizer bar bushing front inner L/R (25mm) fits: MITSUBISHI COLT, COLT CZC VI, COLT VI 1.1-1.5D 06.04-06.12
View partTEDGUM Front track control arm silent block 00445109
Front track control arm silent block L/R (14x60x30/60 mm) fits: DAIHATSU TERIOS MITSUBISHI GRANDIS 1.3/2.0D/2.4 05.97-12.11
View partTEDGUM Coil spring washer 00445116
Coil spring washer front (bottom) fits: MITSUBISHI PAJERO CLASSIC, PAJERO III, PAJERO IV 04.00-
View partTEDGUM Engine mount insert 00445130
Engine mount insert in the front 80 16 fits: MITSUBISHI CARISMA, SPACE 1.8/2.0 01.84-06.06
View partTEDGUM Engine mount insert 00445132
Engine mount insert in the back 79 12 fits: MITSUBISHI SPACE TOYOTA COROLLA 1.6-2.4 01.84-12.04
View partTEDGUM Leaf spring silent block 00445256
Silentblock/spring bush front/rear L/R (14mm/41mm) fits: MITSUBISHI L200, L200 / TRITON 2.0/2.5D 06.96-12.15
View partTEDGUM Front track control arm silent block 00445296
Front track control arm silent block L/R (12x71x43/75 mm strengthened) fits: VOLVO S40 I, V40 MITSUBISHI CARISMA, COLT IV, COLT V, LANCER V, SPACE STAR 1.3-2.0D 04.92-06.06
View partTEDGUM Coil spring washer 00445321
Coil spring washer front (bottom) fits: MITSUBISHI PAJERO III, PAJERO IV 04.00-
View partTEDGUM Stabilizer bar bushing 00445400
Stabilizer bar bushing front inner L/R (25mm) fits: MITSUBISHI PAJERO I, PAJERO II 2.3D-3.5 12.82-04.00
View partTEDGUM Leaf spring silent block 00445418
Silentblock/spring bush front/rear L/R (18mm/32mm) fits: KIA PREGIO MITSUBISHI PAJERO I, PAJERO II 2.3D-3.0 12.82-
View partTEDGUM Engine mount insert 00445421
Engine mount insert R in the back/in the front 80 16 metal / rubber fits: VOLVO S40 I, V40 HYUNDAI COUPE I, LANTRA I, LANTRA II KIA JOICE MITSUBISHI CARISMA, COLT IV, LANCER V 1.3-2.0D 10.90-12.04
View partTEDGUM Front track control arm silent block 00445444
Front track control arm silent block L/R (14x60x30/54 mm) fits: MITSUBISHI ASX, COLT, COLT CZC VI, COLT VI, LANCER VIII, OUTLANDER II, OUTLANDER III SMART FORFOUR 1.1-2.4 01.04-
View partTEDGUM Torque arm silent block 00445466
Lateral control rod silentblock rear L/R fits: MITSUBISHI LANCER VII, OUTLANDER I 1.3-2.4 06.00-12.13
View partTEDGUM Stabilizer bar bushing 00445762
Stabilizer bar bushing front inner L/R (27mm) fits: HYUNDAI GALLOPER II MITSUBISHI L200, PAJERO I, PAJERO II 1.6-3.0 01.83-12.07
View partTEDGUM Stabilizer bar bushing 00445826
Stabilizer bar bushing front inner L/R (17mm) fits: MITSUBISHI COLT V 1.3/1.5/1.6 05.96-08.04
View partBuying with Partios
Buying TEDGUM parts through Partios
Are these genuine TEDGUM parts?
- Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source TEDGUM parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.
Do you supply TEDGUM parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on TEDGUM parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a TEDGUM order?
- It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for TEDGUM parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account