Partios Wholesale catalogue

Tedgum Distributor | Suspension & Steering

Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)

5,984 current catalogue lines

About the TEDGUM range

Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

TEDGUM Polyurethane suspension sleeve 00417969

Polyurethane suspension sleeve, 1pcs, front, hardness: 90 Sha, fits: MERCEDES G (W460), G (W461), G (W463) CHRYSLER 300M FORD USA TAURUS, WINDSTAR 2.0-6.0 03.79-

View part

TEDGUM Stabilizer bar sleeve 00417996

Rubber ring for stabilizing bar bottom/front/top L/R (11/32mm) fits: MERCEDES MB (W631) 2.4D 02.88-02.96

View part

TEDGUM Polyurethane suspension sleeve 00417997

Polyurethane suspension sleeve, 1pcs, axle/front side member, front/rear, hardness: 80 Sha, fits: MERCEDES G (W460), G (W461), G (W463) 2.0-6.0 03.79-

View part

TEDGUM Propeller shaft support 00418279

Propeller shaft support (30mm, with a bearing) fits: MERCEDES CLS (C219), E T-MODEL (S210), E T-MODEL (S211), E (VF210), E (W210), E (W211), S (C215), S (W220, V220) 1.8-6.3 12.96-12.10

View part

TEDGUM Engine mount 00418473

Engine mount front L, hydraulic fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212) 2.1D/2.2D/2.2DH 01.07-

View part

TEDGUM Engine mount 00418476

Engine mount front L/R, hydraulic fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212) 2.5-5.5 01.07-

View part

TEDGUM MacPherson strut mount 00418499

MacPherson strut mount front L fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209) 1.6-5.5 05.00-06.11

View part

TEDGUM Engine mount 00418536

Engine mount front L/R, hydraulic fits: MERCEDES M (W164) 3.0D/3.5 02.05-12.11

View part

TEDGUM Transmission mount 00418581

Transmission mount rear L/R (manual) fits: MERCEDES M (W164), R (W251, V251) 3.0D-6.3 02.05-12.11

View part

TEDGUM Rear wishbone silent block 00418759

Rear track control arm silent block L/R (in the front/rear) fits: MERCEDES HECKFLOSSE (W110), HECKFLOSSE (W111, W112), PAGODE (W113), S (W108, W109) 1.9-6.3 08.59-08.72

View part

TEDGUM Stabilizer bar bushing 00418796

Stabilizer bar bushing front inner (25mm) fits: MERCEDES ATEGO, ATEGO 2 4.2D-7.2D 01.98-

View part

TEDGUM Stabilizer bar bushing 00418813

Stabilizer bar bushing front inner L/R (36mm)

View part

TEDGUM Stabilizer bar sleeve 00418840

Rubber ring for stabilizing bar front L/R (14/46mm for stabilizer) fits: MERCEDES S (W220, V220) 2.8-6.3 10.98-08.05

View part

TEDGUM Engine mount 00418930

Engine mount front L/R, housing of a gearbox, rubber-metal fits: MERCEDES A (W168), VANEO (414) 1.4-2.1 07.97-07.05

View part

TEDGUM Coil spring washer 00418971

Coil spring washer rear (L/R, top) fits: MERCEDES HECKFLOSSE (W110), HECKFLOSSE (W111, W112) 08.59-02.68

View part

TEDGUM Rear wishbone silent block 00418976

Rear track control arm silent block L/R (outer rear) fits: MERCEDES HECKFLOSSE (W110), HECKFLOSSE (W111, W112), PAGODE (W113), S (W108, W109) 1.9-6.3 08.59-08.72

View part

TEDGUM Stabilizer bar bushing 00418978

Stabilizer bar bushing front inner L/R (19mm) fits: MERCEDES HECKFLOSSE (W110), HECKFLOSSE (W111, W112), PAGODE (W113) 1.9-2.7 08.59-03.71

View part

TEDGUM Stabilizer bar sleeve 00418979

Rubber ring for stabilizing bar bottom/rear/top L/R (20/40mm) fits: MERCEDES HECKFLOSSE (W111, W112) 2.2/2.3/3.0 08.59-01.68

View part

TEDGUM Polyurethane suspension sleeve 00418982

Polyurethane bushing, 1pcs, control rod, L/R, hardness: 70 Sha, fits: MERCEDES HECKFLOSSE (W111, W112), PAGODE (W113), S (W108, W109) 2.2-6.3 08.59-08.72

View part

TEDGUM Polyurethane suspension sleeve 00418995

Polyurethane buffer, 1pcs, top front swingarm, L/R, hardness: 70 Sha, fits: MERCEDES HECKFLOSSE (W110), HECKFLOSSE (W111, W112), PAGODE (W113), S (W108, W109) 1.9-3.5 08.59-08.72

View part

TEDGUM Control arm repair kit 00419015

Control arm repair kit fits: MERCEDES PAGODE (W113) 2.3/2.5/2.7 01.63-03.71

View part

TEDGUM Polyurethane suspension sleeve 00419084

Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 90 Sha, fits: MERCEDES ATEGO, ATEGO 2 4.2D-7.2D 01.98-

View part

TEDGUM Control arm repair kit 00419088

Control arm repair kit rear L/R (track control arm type: transverse, 18 pcs. set sleeves) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201) 1.8-6.3 10.82-03.10

View part

TEDGUM Polyurethane suspension sleeve 00419090

Polyurethane stabilizer bushing, 1pcs, rear stabilizer, inside, hardness: 90 Sha, fits: MERCEDES LK/LN2 4.0D/4.2D/6.0D 01.84-12.98

View part

TEDGUM Polyurethane suspension sleeve 00419094

Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 90 Sha, fits: MERCEDES LK/LN2 4.0D/4.2D/6.0D 01.84-12.98

View part

TEDGUM Polyurethane suspension sleeve 00419095

Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 90 Sha, fits: MERCEDES LK/LN2 4.0D/4.2D/6.0D 01.84-12.98

View part

TEDGUM Polyurethane suspension sleeve 00419098

Polyurethane stabilizer bushing, 1pcs, rear stabilizer, inside, hardness: 90 Sha, fits: MERCEDES LK/LN2 4.0D/4.2D/6.0D 01.84-12.98

View part

TEDGUM Rear wishbone silent block 00419101

Rear track control arm silent block L/R (in the back/rear, trailing arm) fits: MERCEDES GULLWING (W198) 3.0 09.54-05.57

View part

TEDGUM Polyurethane suspension sleeve 00419103

Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 90 Sha, fits: MERCEDES LK/LN2 4.0D/4.2D/6.0D 01.84-12.98

View part

TEDGUM Polyurethane suspension sleeve 00419108

Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 90 Sha, fits: MERCEDES LK/LN2 4.0D/4.2D/6.0D 01.84-12.98

View part

TEDGUM Torque arm silent block 00419118

Lateral control rod silentblock rear L/R MERCEDES TYPE-300 (W186, W189) 1951-1962

View part

TEDGUM Front track control arm silent block 00419158

Front track control arm silent block L/R (10x47) fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E (VF210), E (W210), SLK (R170) 1.8-5.5 03.93-04.04

View part

TEDGUM Stabilizer bar sleeve 00419196

Rubber ring for stabilizing bar bottom/front/top L/R (11/32mm) fits: MERCEDES 170 (W136, W191) 1.8 05.49-02.52

View part

TEDGUM Rear wishbone silent block 00419219

Rear track control arm silent block L/R (bottom/inner in the back/rear) fits: MERCEDES CLS (C219), E T-MODEL (S211), E (VF211), E (W211), SL (R230) 1.8-6.3 10.01-01.12

View part

TEDGUM Rear wishbone silent block 00419234

Rear track control arm silent block L/R (bottom/outer in the back/rear) fits: MERCEDES CLS (C219), E T-MODEL (S211), E (VF211), E (W211), SL (R230) 1.8-6.3 10.01-01.12

View part

TEDGUM Control arm repair kit 00419239

Control arm repair kit rear L/R (track control arm type: transverse) fits: MERCEDES E T-MODEL (S211), E (VF211), E (W211) 1.8-6.3 03.02-07.09

View part

TEDGUM Polyurethane suspension sleeve 00419312

Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), C T-MODEL (S202) 10.82-04.04

View part

TEDGUM Suspension buffer 00419591

Suspension buffer rear L/R fits: MERCEDES S (W108, W109) 2.7/3.5/6.3 03.66-08.72

View part

TEDGUM Front track control arm silent block 00419750

Front track control arm silent block L/R (26x70x60/63 mm) fits: MERCEDES VIANO (W639), VITO / MIXTO (W639), VITO (W639) 2.1D-3.7 09.03-

View part

TEDGUM Front track control arm silent block 00419751

Front track control arm silent block L/R (14x70x40/60 mm) fits: MERCEDES VIANO (W639), VITO / MIXTO (W639), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447), VITO (W639) 1.6D-3.7 09.03-

View part

TEDGUM Stabilizer bar bushing 00419756

Stabilizer bar bushing front inner L/R (29mm) fits: MERCEDES E T-MODEL (S211), E (VF211), E (W211), S (C216), S (W220, V220), S (W221, V221) 1.8-6.3 10.98-12.13

View part

TEDGUM Stabilizer bar bushing 00419904

Stabilizer bar bushing front inner L/R (32mm) fits: MERCEDES E T-MODEL (S211), E (VF211), E (W211), S (W220, V220) 1.8-6.3 10.98-07.09

View part

TEDGUM Front track control arm silent block 00434553

Front axle silentblock/wishbone mounting L/R (lower from the back) MERCURY (USA) VILLAGER 3.0 BENZ 1993-> 1996

View part

TEDGUM Front track control arm silent block 00440049

Front track control arm silent block (12x46x44/54 mm) fits: MITSUBISHI SPACE 2.0/2.4 10.98-12.04

View part

TEDGUM Front track control arm silent block 00440098

Front track control arm silent block L/R (14x46x38/55 mm) fits: MITSUBISHI PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

TEDGUM Rear wishbone silent block 00440099

Rear track control arm silent block L/R (top in the back/in the front/rear) fits: MITSUBISHI PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

TEDGUM Stabilizer bar bushing 00440169

Stabilizer bar bushing rear bottom L/R (12mm) fits: MERCEDES SPRINTER 4,6-T (B906), SPRINTER 5-T (B906), T2/L, T2/LN1, VARIO, VARIO (B667, B670, B668), VARIO (B670), VARIO (B670, B668 1.4-5.7D 01.68-

View part

TEDGUM MacPherson strut mount 00440216

MacPherson strut mount rear L/R fits: MITSUBISHI PAJERO II 2.4-3.5 12.90-04.00

View part

Buying with Partios

Buying TEDGUM parts through Partios

Are these genuine TEDGUM parts?

Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source TEDGUM parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.

Do you supply TEDGUM parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on TEDGUM parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a TEDGUM order?

It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for TEDGUM parts?

No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account