Partios Wholesale catalogue
Tedgum Distributor | Suspension & Steering
Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)
5,984 current catalogue lines
About the TEDGUM range
Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
TEDGUM Engine mount 00393484
Engine mount front R, rubber-metal fits: MAZDA 323 F VI, 323 S VI, 5, 626 V, PREMACY 2.0D 04.98-05.10
View partTEDGUM Engine mount insert 00393517
Engine mount insert in the back 73 12 fits: MAZDA 121 I, 121 II 1.1/1.3 10.87-03.96
View partTEDGUM Engine mount 00393524
Engine mount front R, rubber-metal fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V 1.3-2.0D 05.94-12.98
View partTEDGUM Engine mount 00393612
Engine mount front R, hydraulic fits: FORD USA ESCAPE MAZDA TRIBUTE 2.0/2.3/3.0 03.00-05.08
View partTEDGUM Lateral control rod rubber ring 00393764
Lateral control rod rubber ring in the front/rear L/R (12mm) fits: FORD USA PROBE I, PROBE II MAZDA 323 C IV, 323 C V, 323 F IV, 323 F V, 323 F VI, 323 P V, 323 S IV, 323 S V, 323 S VI 04.87-
View partTEDGUM Stabilizer bar bushing 00394158
Stabilizer bar bushing front/rear inner L/R (19mm) fits: MAZDA 323 F VI, 323 S VI, 5 1.3-2.3 05.98-05.10
View partTEDGUM Coil spring washer 00394356
Coil spring washer rear (top) fits: MAZDA 6 01.02-02.08
View partTEDGUM Filler plug seal 00394376
Filler plug seal fits: MAZDA 6 1.8-2.3 01.02-02.08
View partTEDGUM Engine mount insert 00394894
Engine mount insert in the front 73 12 metal / rubber fits: MAZDA 121 I, 121 II 1.1/1.3 10.87-03.96
View partTEDGUM Front track control arm silent block 00395356
Front track control arm silent block rear L/R (14x37) fits: MAZDA XEDOS 9 2.0/2.3/2.5 07.93-09.02
View partTEDGUM Torque arm silent block 00395468
Lateral control rod silentblock rear L/R fits: FORD USA ESCORT MAZDA 323 III 1.1-1.9 08.85-09.96
View partTEDGUM Engine mount insert 00395809
Engine mount insert in the front 76 12 fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V 1.3-2.0D 05.94-12.98
View partTEDGUM Engine mount insert 00395840
Engine mount insert in the back 72 18 metal / rubber fits: MAZDA 323 F VI, 323 S VI, 5, PREMACY 2.0/2.0D 09.98-05.10
View partTEDGUM Transmission mount insert 00395841
Transmission mount insert front L fits: MAZDA 323 F VI, 323 S VI, 626 IV, 626 V, PREMACY 2.0D 10.92-03.05
View partTEDGUM Stabilizer bar bushing 00396253
Stabilizer bar bushing front inner L/R (22mm) fits: MAZDA 626 IV, MX-6 1.8-2.5 08.91-09.97
View partTEDGUM Air filter connecting pipe 00396364
Air filter connecting pipe fits: MAZDA 323 C V, 323 F V, 323 S V, MX-3 1.6/1.8 05.91-09.98
View partTEDGUM Transmission mount insert 00396561
Transmission mount insert rear fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V 1.3-2.0D 05.94-12.98
View partTEDGUM Polyurethane suspension sleeve 00396645
Polyurethane spring washer, 1pcs, rear spring, L/R, bottom, hardness: 90 Sha, rises to 30 mm fits: MAZDA 3, 5 1.3-2.3 10.03-05.10
View partTEDGUM Differential brackets 00396789
Differential brackets front/rear L/R (12x55x32mm) fits: MAZDA CX-9 3.5/3.7 09.06-
View partTEDGUM Differential mount, rear 00396797
Rear axle brackets rear (diameter: 14/65mm length: 32-42mm, differential mounting) fits: MAZDA CX-9 3.5/3.7 09.06-
View partTEDGUM Engine mount insert 00396940
Engine mount insert R 90 20 fits: MAZDA 323 F VI, 323 S VI, 5, 626 V, PREMACY 2.0D 04.98-05.10
View partTEDGUM Polyurethane suspension sleeve 00396946
Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 80 Sha, fits: MAZDA 323 C V, 323 F V, 323 F VI, 323 P V, 323 S V, 323 S VI, 5 1.3-2.3 05.94-
View partTEDGUM Polyurethane suspension sleeve 00396963
Polyurethane bushing, 1pcs, front shock absorber mounting, L/R, top, hardness: 80 Sha, fits: MAZDA BT-50 2.5D/3.0D 08.06-
View partTEDGUM Polyurethane suspension sleeve 00397016
Polyurethane bushing, 1pcs, body/for leaf spring/rear leaf spring, L/R, rear, hardness: 80 Sha, fits: MAZDA E OPEL CAMPO 2.0-3.1D 01.83-09.04
View partTEDGUM Engine mount insert 00397079
Engine mount insert in the back 76 18 fits: MAZDA 626 V 2.0/2.0D 05.97-10.02
View partTEDGUM Polyurethane suspension sleeve 00397097
Polyurethane stabilizer bushing, 1pcs, rear stabilizer, inside, hardness: 70 Sha, fits: MAZDA 323 F VI, 323 S VI, 626 V, PREMACY 1.3-2.0D 05.97-03.05
View partTEDGUM Polyurethane suspension sleeve 00397286
Polyurethane stabilizer bushing, 1pcs, front stabilizer bar connector/rear stabilizer bar connector, top, hardness: 80 Sha, fits: MAZDA 323 C IV, 323 F IV, 323 III, 323 S IV 1.1-2.2D 11.82-09.04
View partTEDGUM Polyurethane suspension sleeve 00397515
Polyurethane bushing, 1pcs, transverse track control arm, L/R, external, hardness: 80 Sha, fits: MAZDA XEDOS 6 1.6/2.0 01.92-10.99
View partTEDGUM Lateral control rod rubber ring 00397583
Lateral control rod rubber ring rear (20mm) fits: MAZDA MPV I 11.88-09.99
View partTEDGUM Polyurethane suspension sleeve 00397609
Polyurethane bushing, 1pcs, lateral bar/swingarm, L/R, bottom/top, hardness: 80 Sha, fits: ACURA LEGEND II ALFA ROMEO GTV HONDA LEGEND II MAZDA 6, XEDOS 9 1.8-3.2 01.91-02.08
View partTEDGUM Polyurethane suspension sleeve 00397760
Polyurethane bushing, 1pcs, trailing arm, L/R, front, hardness: 80 Sha, fits: MAZDA PREMACY 1.9/2.0/2.0D 07.99-03.05
View partTEDGUM Front track control arm silent block 00398075
Front track control arm silent block L/R (12x36) fits: MAZDA TRIBUTE 2.0/2.3/3.0 03.00-05.08
View partTEDGUM Differential mount, rear 00398078
Rear axle brackets (diameter: 12/60mm length: 30-40mm) fits: MAZDA 6 2.3 12.05-08.07
View partTEDGUM Rear wishbone silent block 00398163
Rear track control arm silent block L/R (outer in the back/rear) fits: MAZDA 323 F VI, 323 S VI, 626 V, MX-3, PREMACY 1.3-2.0D 05.91-03.05
View partTEDGUM Rear wishbone silent block 00398165
Rear track control arm silent block L/R (inner in the back/rear) fits: MAZDA 323 F VI, 323 S VI, 626 V, MX-3, PREMACY 1.3-2.0D 05.91-03.05
View partTEDGUM Rear wishbone silent block 00398334
Rear track control arm silent block L/R (bottom/inner in the back/rear) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Engine mount 00398339
Engine mount front R, hydraulic fits: MAZDA 2 1.3-1.6D 07.07-06.15
View partTEDGUM Rear wishbone silent block 00398383
Rear track control arm silent block L/R (bottom/outer in the front/rear) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear wishbone silent block 00398385
Rear track control arm silent block L/R (bottom/inner/outer in the front/rear) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear wishbone silent block 00398386
Rear track control arm silent block L/R (inner/outer/top rear, transverse track control arm) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear wishbone silent block 00398399
Rear track control arm silent block L/R (in the front/rear) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear suspension beam silent block 00398418
Rear suspension beam silent block (in the front) L fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear suspension beam silent block 00398419
Rear suspension beam silent block (in the front) R fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear suspension beam silent block 00398420
Rear suspension beam silent block (in the back) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Rear wishbone silent block 00398443
Rear track control arm silent block L/R (bottom/outer in the front/rear) fits: DAEWOO NUBIRA MAZDA 6 1.6-2.5 04.97-
View partTEDGUM Front track control arm silent block 00398478
Front track control arm silent block L/R (14x40x34/57 mm) fits: MAZDA 6 1.8-2.5 08.07-07.13
View partTEDGUM Torque arm silent block 00398542
Lateral control rod silentblock rear L/R fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V 1.3-2.0D 05.94-12.98
View partTEDGUM Torque arm silent block 00398543
Lateral control rod silentblock rear L/R fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V 1.3-2.0D 05.94-
View partBuying with Partios
Buying TEDGUM parts through Partios
Are these genuine TEDGUM parts?
- Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source TEDGUM parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.
Do you supply TEDGUM parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on TEDGUM parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a TEDGUM order?
- It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for TEDGUM parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account