Partios Wholesale catalogue
Tedgum Distributor | Suspension & Steering
Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)
5,984 current catalogue lines
About the TEDGUM range
Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
TEDGUM Polyurethane suspension sleeve 00267234
Polyurethane engine pad, 1pcs, engine, R, hardness: 70 Sha, small cartridge fits: HONDA ACCORD VI 2.0D 02.99-12.02
View partTEDGUM Stabilizer bar sleeve 00267257
Rubber ring for stabilizing bar rear L/R (15/23mm) fits: HONDA LEGEND II, PRELUDE IV 2.0-3.2 01.91-09.96
View partTEDGUM Stabilizer link 00267275
Stabilizer link front L 55mm (set), quantity per axle: 1 fits: HONDA CIVIC VII, CR-V II, FR-V, STREAM 1.3H-2.4 11.00-12.09
View partTEDGUM Stabilizer link 00267276
Stabilizer link front R 55mm (set), quantity per axle: 1 fits: HONDA CIVIC VII, CR-V II, FR-V, STREAM 1.3H-2.4 11.00-12.09
View partTEDGUM Polyurethane suspension sleeve 00267279
Polyurethane stabilizer bushing, 1pcs, front stabilizer bar connector/rear stabilizer bar connector, L/R, top, hardness: 80 Sha, fits: HONDA ACCORD III, ACCORD IV, ACCORD V 1.4-2.3 10.83-10.98
View partTEDGUM Polyurethane suspension sleeve 00267516
Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 80 Sha, fits: HONDA CIVIC V, CIVIC VI 1.3-1.6 10.91-03.01
View partTEDGUM Polyurethane suspension sleeve 00267517
Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 80 Sha, fits: HONDA CIVIC VI 1.4-1.6 10.95-03.01
View partTEDGUM Polyurethane suspension sleeve 00267524
Polyurethane stabilizer bushing, 1pcs, front stabilizer, inside, hardness: 80 Sha, fits: HONDA CIVIC VI, CR-V I 1.4-2.0 10.95-02.02
View partTEDGUM Polyurethane suspension sleeve 00267525
Polyurethane front Swingarm bushing, 1pcs, L/R, top, hardness: 70 Sha, fits: HONDA CIVIC VI, CR-V I 1.4-2.0 06.95-12.01
View partTEDGUM Front track control arm silent block 00267526
Front track control arm silent block L/R (10x36 polyurethane) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX III 1.3-1.6 09.87-02.01
View partTEDGUM Polyurethane suspension sleeve 00267528
Polyurethane rear lower transverse swingarm bushing, 1pcs, transverse track control arm, L/R, bottom, hardness: 80 Sha, fits: HONDA CIVIC IV, CIVIC V 1.3-1.6 09.87-12.95
View partTEDGUM Polyurethane suspension sleeve 00267530
Polyurethane front Swingarm bushing, 1pcs, front bottom swingarm, L/R, to shock absorber, hardness: 80 Sha, fits: HONDA CIVIC VI, CR-V I 1.4-2.0D 09.94-02.02
View partTEDGUM Polyurethane suspension sleeve 00267531
Track control arm silent block (L/R, hardness: 80 Sha, inner diameter 18mm) fits: HONDA CIVIC VI, CR-V I 06.95-02.02
View partTEDGUM Polyurethane suspension sleeve 00267538
Polyurethane stabilizer bushing, 1pcs, rear stabilizer bar connector, L/R, bottom, hardness: 70 Sha, 4WD vehicles fits: HONDA ODYSSEY 2.3 10.97-12.99
View partTEDGUM Polyurethane suspension sleeve 00267544
Track control arm silent block (L/R, hardness: 80 Sha, inner diameter 10mm, outer diameter 34mm) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CONCERTO, CR-V I, CRX II, CRX III 09.87-05.05
View partTEDGUM Front track control arm silent block 00267546
Front track control arm silent block L/R (12x38x39/59 mm) fits: HONDA CIVIC VIII 1.4-2.2D 09.05-01.12
View partTEDGUM Polyurethane suspension sleeve 00267556
Track control arm silent block (L/R, hardness: 80 Sha, inner diameter 10mm, outer diameter 30mm) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-02.01
View partTEDGUM Rear wishbone silent block 00267560
Polyurethane bushing, 1pcs, trailing arm, L/R, for body, hardness: 80 Sha, fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CONCERTO, CR-V I, CRX II, CRX III, INTEGRA ROVER 200, 200 II 1.3-2.0D 09.87-05.05
View partTEDGUM Polyurethane suspension sleeve 00267562
Rear lower Swingarm bushing (central), 1pcs, L/R, to shock absorber, hardness: 80 Sha, fits: HONDA ACCORD IV, ACCORD V, CIVIC IV, CIVIC VI, CONCERTO ROVER 400 II, 45 I, 600 I 1.2-2.3 09.87-05.05
View partTEDGUM Front track control arm silent block 00267622
Front track control arm silent block in the front L/R (12x40,2x40/60 mm) fits: HONDA ACCORD III, PRELUDE III 1.6/2.0 11.85-01.92
View partTEDGUM Polyurethane suspension sleeve 00267756
Polyurethane bushing, 1pcs, external/front bottom swingarm/rear/trailing arm - rear, to shock absorber, hardness: 80 Sha, fits: VOLVO 240, 260, 740, 760, 780, 940, 940 II, 960 1.3-6.9D 08.74-
View partTEDGUM Polyurethane suspension sleeve 00268070
Polyurethane stabilizer bushing, 1pcs, rear stabilizer, inside, hardness: 80 Sha, fits: HONDA ACCORD IV, CIVIC V, CRX III ROVER 600 I 1.3-2.3 01.90-06.99
View partTEDGUM Polyurethane suspension sleeve 00268073
Polyurethane stabilizer bushing, 1pcs, rear stabilizer, inside, hardness: 70 Sha, fits: HONDA ACCORD V, CIVIC VI, CONCERTO 1.4-2.3 08.89-02.01
View partTEDGUM Rear wishbone silent block 00268115
Rear track control arm silent block (outer rear) fits: HONDA HR-V, LOGO 1.3/1.6 03.99-09.05
View partTEDGUM Stabilizer bar bushing 00268121
Stabilizer bar bushing front inner L/R (21mm) fits: HONDA CIVIC VI 1.4-1.6 10.95-03.01
View partTEDGUM Stabilizer bar bushing 00268125
Stabilizer bar bushing front inner L/R (21mm) fits: HONDA CIVIC VII 1.4/1.5/1.6 12.00-09.05
View partTEDGUM Rear wishbone silent block 00268126
Rear track control arm silent block (inner/outer rear) fits: HONDA HR-V, LOGO 1.3/1.6 03.99-09.05
View partTEDGUM Stabilizer bar bushing 00268131
Stabilizer bar bushing rear inner L/R (21mm) fits: HONDA ACCORD VII, ODYSSEY 2.0-3.5 07.02-
View partTEDGUM Stabilizer bar bushing 00268143
Stabilizer bar bushing rear L/R (12mm) fits: HONDA CIVIC VII 1.4-2.0 11.00-09.05
View partTEDGUM Engine mount 00268145
Engine mount front, rubber-metal fits: HONDA CIVIC VII, FR-V, STREAM 2.0 05.01-12.06
View partTEDGUM Front track control arm silent block 00268154
Front track control arm silent block L/R (14x42x45/63 mm) fits: HONDA CIVIC VII, CR-V II, FR-V 1.3H-2.4 11.00-12.09
View partTEDGUM Stabilizer bar bushing 00268170
Stabilizer bar bushing front inner L/R (25mm) fits: HONDA CIVIC VI, CR-V I 1.4-2.0 10.95-02.02
View partTEDGUM Stabilizer bar bushing 00268193
Stabilizer bar bushing rear inner L/R (16mm) fits: HONDA ACCORD VI 1.6-3.0 02.98-06.03
View partTEDGUM Steering knuckle silent block 00268196
Knuckle silentblock L/R (length30-47) fits: HONDA CIVIC VII, CR-V II, CR-V III, CR-V IV, STREAM 1.3H-2.4 11.00-12.18
View partTEDGUM Stabilizer bar bushing 00268197
Stabilizer bar bushing rear inner L/R (14mm) fits: HONDA ACCORD VII 2.0/2.2D/2.4 02.03-05.08
View partTEDGUM Steering knuckle silent block 00268199
Knuckle silentblock L/R rear (bottom) fits: HONDA CIVIC VII, CR-V II 1.3H-2.2D 11.00-03.07
View partTEDGUM Front track control arm silent block 00268200
Track control arm silent block L/R (14x65x32/63 mm) fits: HONDA CIVIC VII, CIVIC VIII, CR-V II, FR-V 1.3-2.4 11.00-12.13
View partTEDGUM Polyurethane suspension sleeve 00268228
Polyurethane shock absorber bushing, 1pcs, Front shock absorber, L/R, hardness: 70 Sha, no cover fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18
View partTEDGUM Front track control arm silent block 00268283
Front track control arm silent block L/R (14x80x34/66 mm) fits: HONDA ACCORD VII, ACCORD VIII 2.0-3.0 09.02-06.15
View partTEDGUM MacPherson strut bearing 00268874
MacPherson strut bearing fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12
View partTEDGUM Front track control arm silent block 00269012
Front track control arm silent block L (20x70x49/55 mm) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12
View partTEDGUM Front track control arm silent block 00269013
Front track control arm silent block R fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12
View partTEDGUM Stabilizer bar bushing 00269086
Stabilizer bar bushing front inner L/R (19mm) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12
View partTEDGUM Stabilizer link 00269093
Stabilizer link front L/R 318mm fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18
View partTEDGUM Front track control arm silent block 00269110
Front track control arm silent block L/R (14x40) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12
View partTEDGUM Engine mount 00269162
Engine mount front L, rubber-metal fits: HONDA CIVIC VIII, CR-V III 1.8-2.4 09.05-05.13
View partTEDGUM Engine mount 00269182
Engine mount front R, hydraulic fits: HONDA CR-V III 2.0 10.06-06.12
View partTEDGUM Rear wishbone silent block 00269240
Rear track control arm silent block L/R (inner/outer in the front/rear) fits: HONDA CIVIC VI, CR-V I ROVER 200, 200 II, 400, 400 II, 45 I 1.4-2.0D 10.89-05.05
View partBuying with Partios
Buying TEDGUM parts through Partios
Are these genuine TEDGUM parts?
- Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source TEDGUM parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.
Do you supply TEDGUM parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on TEDGUM parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a TEDGUM order?
- It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for TEDGUM parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account