Partios Wholesale catalogue
Tedgum Distributor | Suspension & Steering
Engine mount (807) · Front track control arm silent block (701) · Polyurethane suspension sleeve (691) · Stabilizer bar bushing (619) · Rear wishbone silent block (431) · Macpherson strut mount (303) · Propeller shaft support (214) · Track control arm fitting elements (174) · 95 further part types (1,899)
5,984 current catalogue lines
About the TEDGUM range
Tedgum covers suspension & steering at Partios. It has 5,984 lines across 103 part types, rather than depth in a single one. The largest groups are engine mount (807), front track control arm silent block (701), polyurethane suspension sleeve (691), stabilizer bar bushing (619) and rear wishbone silent block (431). Beyond those, 2,287 lines are spread across 97 further part types. That tail includes propeller shaft support, track control arm fitting elements and rear suspension beam silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 5,984 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
TEDGUM Stabilizer link 00132523
Stabilizer link rear L/R fits: CHRYSLER PT CRUISER 1.6-2.4 06.00-12.10
View partTEDGUM Rear wishbone silent block 00132703
Rear track control arm silent block L/R (on body side in the front/rear) fits: CHRYSLER 300M, CONCORDE, LHS, PT CRUISER 1.6-3.5 01.94-12.10
View partTEDGUM Transmission mount insert 00132752
Transmission mount insert L fits: CHRYSLER VOYAGER II DODGE CARAVAN, GRAND 2.5-3.3 08.90-09.95
View partTEDGUM Front track control arm silent block 00132869
Front track control arm silent block in the front L/R (12x35x37/50 mm) fits: CHRYSLER CIRRUS, SEBRING, STRATUS 2.0-2.7ALK 05.94-06.07
View partTEDGUM Stabilizer bar sleeve 00132890
Rubber ring for stabilizing bar bottom/front/top L/R (8/30mm) fits: CHRYSLER NEON II 2.0 08.99-12.06
View partTEDGUM MacPherson strut mount 00132966
MacPherson strut mount front L/R fits: CHRYSLER DAYTONA, LE BARON, NEW YORKER, VOYAGER I, VOYAGER II, VOYAGER III DODGE CARAVAN, DAYTONA PLYMOUTH SUNDANCE, VOYAGER 2.2-3.3 01.86-03.01
View partTEDGUM MacPherson strut mount 00132990
MacPherson strut mount rear R (with a bearing) fits: CHRYSLER 300M, CONCORDE, LHS DODGE INTREPID 2.7/3.2/3.5 10.97-09.04
View partTEDGUM MacPherson strut mount 00132992
MacPherson strut mount front L/R fits: CHRYSLER 300M, CONCORDE, LHS DODGE INTREPID 2.7/3.2/3.5 10.97-09.04
View partTEDGUM MacPherson strut mount 00133000
MacPherson strut mount front L/R (with a bearing) fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II PLYMOUTH NEON II 1.6-2.4 08.99-
View partTEDGUM MacPherson strut mount 00133030
MacPherson strut mount rear L fits: CHRYSLER SEBRING DODGE STRATUS, STRATUS II 2.0-3.0 09.00-06.07
View partTEDGUM Engine mount 00133209
Engine mount front R, top, rubber-metal fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II PLYMOUTH NEON II 2.0/2.4 08.99-
View partTEDGUM Engine mount insert 00133211
Engine mount insert R in the front 72 12 fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II PLYMOUTH NEON II 2.0/2.4 08.99-
View partTEDGUM Engine mount insert 00133213
Engine mount insert R 41 12/18 fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II PLYMOUTH NEON II 1.6-2.4 08.99-
View partTEDGUM Engine mount insert 00133412
Engine mount insert in the front 84 11 fits: CHRYSLER NEON, VOYAGER III DODGE CARAVAN 2.0-3.3 05.94-03.01
View partTEDGUM Stabilizer bar bushing 00133570
Stabilizer bar bushing front outer L/R (17mm) fits: CHRYSLER NEON DODGE NEON PLYMOUTH NEON 1.8/2.0 01.94-09.99
View partTEDGUM Shock absorber silent block 00133610
Shock absorber bushing rear L/R fits: CHRYSLER GRAND VOYAGER V, TOWN & COUNTRY, VOYAGER IV, VOYAGER V LANCIA VOYAGER 2.4-4.0 09.99-
View partTEDGUM Torque arm silent block 00133676
Lateral control rod silentblock rear L/R fits: CHRYSLER GRAND VOYAGER III, VOYAGER III 2.0-3.8 01.95-12.01
View partTEDGUM Engine mount insert 00133691
Engine mount insert bottom/in the back 61 11 fits: CHRYSLER VOYAGER II, VOYAGER III 2.5-3.3 08.90-03.01
View partTEDGUM Engine mount 00133693
Engine mount front R, rubber-metal fits: CHRYSLER NEON, VOYAGER III DODGE CARAVAN PLYMOUTH VOYAGER 2.0-3.8 10.89-03.01
View partTEDGUM Lateral control rod rubber ring 00133776
Lateral control rod rubber ring (12mm) fits: CHRYSLER 300M, CONCORDE, LHS, VISION 09.93-09.04
View partTEDGUM Engine mount 00133795
Engine mount front R, rubber-metal fits: CHRYSLER NEON 2.0 05.94-08.99
View partTEDGUM Engine mount insert 00134246
Engine mount insert R 91 14 fits: CHRYSLER PT CRUISER 2.0/2.4 06.00-12.10
View partTEDGUM Front track control arm silent block 00134427
Front track control arm silent block L/R (18) fits: CHRYSLER GRAND VOYAGER III, VOYAGER III DODGE CARAVAN, GRAND PLYMOUTH VOYAGER 2.0-3.8 01.95-08.07
View partTEDGUM Stabilizer bar bushing 00134714
Stabilizer bar bushing front inner L/R (26mm) fits: CHRYSLER 300M, CONCORDE DODGE INTREPID MAN TGA RVI PREMIUM 2 12.8D-7.1D 10.97-
View partTEDGUM Stabilizer bar bushing 00134885
Stabilizer bar bushing rear inner L/R (15mm) fits: CHRYSLER 300M, CONCORDE, LHS DODGE INTREPID 2.7/3.2/3.5 11.94-09.04
View partTEDGUM Engine mount 00135002
Engine mount front R, rubber-metal fits: CHRYSLER GRAND VOYAGER III, VOYAGER III DODGE CARAVAN PLYMOUTH VOYAGER 2.0-3.8 01.95-03.01
View partTEDGUM Stabilizer bar bushing 00135073
Stabilizer bar bushing front inner L/R (26mm) fits: CHRYSLER PACIFICA 3.5/3.8/4.0 08.03-09.08
View partTEDGUM Stabilizer bar bushing 00135295
Stabilizer bar bushing rear inner L/R (16mm) fits: CHRYSLER GRAND VOYAGER III, VOYAGER III 2.0-3.8 01.95-12.01
View partTEDGUM Stabilizer link 00135297
Stabilizer link rear L/R , quantity per axle: 2 fits: CHRYSLER GRAND VOYAGER III, VOYAGER III, VOYAGER IV 2.0-3.8 01.95-12.08
View partTEDGUM Stabilizer bar bushing 00135374
Stabilizer bar bushing front outer L/R (24mm, to track control arm) fits: CHRYSLER VOYAGER II DODGE CARAVAN, GRAND 2.5-3.3 08.90-09.95
View partTEDGUM Stabilizer bar bushing 00135375
Stabilizer bar bushing front inner L/R (24mm, for body) fits: CHRYSLER VOYAGER II 2.5-3.3 08.90-09.95
View partTEDGUM Engine mount insert 00135487
Engine mount insert L front 81 12 metal / rubber (from front and rear mount) fits: CHRYSLER GRAND VOYAGER III, VOYAGER III DODGE CARAVAN PLYMOUTH VOYAGER 2.0-3.8 01.95-03.01
View partTEDGUM Engine mount insert 00135541
Engine mount insert in the back/in the front 73 12 metal / rubber fits: CHRYSLER NEON, PT CRUISER DODGE NEON MAZDA 121 I, 121 II PLYMOUTH NEON 1.1-2.4 10.87-12.10
View partTEDGUM Engine mount insert 00135616
Engine mount insert in the front 41 12/18 fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II PLYMOUTH NEON II 2.0/2.4 08.99-
View partTEDGUM Front track control arm silent block 00135633
Front track control arm silent block rear L/R (14x56) fits: CHRYSLER VOYAGER II 2.5-3.3 08.90-09.95
View partTEDGUM Stabilizer bar bushing 00135914
Stabilizer bar bushing front L/R (20mm) fits: CHRYSLER VOYAGER II 2.5-3.3 08.90-09.95
View partTEDGUM Stabilizer bar bushing 00135988
Stabilizer bar bushing rear inner L/R (17mm) fits: CHRYSLER VOYAGER IV DODGE CARAVAN, GRAND 2.4-3.8 09.99-12.08
View partTEDGUM Front track control arm silent block 00136104
Front track control arm silent block in the front L/R (14x39x48/59 mm) fits: CHRYSLER 300M DODGE INTREPID 2.7/3.3/3.5 10.92-09.04
View partTEDGUM Stabilizer bar bushing 00136504
Stabilizer bar bushing front inner L/R (24mm) fits: CHRYSLER GRAND VOYAGER III, VOYAGER III, VOYAGER IV DODGE CARAVAN, GRAND PLYMOUTH VOYAGER 2.0-3.8 01.95-12.08
View partTEDGUM Front track control arm silent block 00136555
Front track control arm silent block L/R (16x54x29/62 mm) fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II 1.6-2.4 08.99-
View partTEDGUM Front track control arm silent block 00136558
Front track control arm silent block L/R (14x34) fits: CHRYSLER NEON II, PT CRUISER DODGE NEON II 1.6-2.4 08.99-
View partTEDGUM Leaf spring silent block 00136701
Silentblock/spring bush front L/R (14mm/78mm) fits: CHRYSLER GRAND VOYAGER III, VOYAGER I, VOYAGER II, VOYAGER III, VOYAGER IV DODGE CARAVAN, GRAND PLYMOUTH VOYAGER 2.0-3.8 09.86-12.08
View partTEDGUM Engine mount insert 00136751
Engine mount insert R 96 12 fits: CHRYSLER GRAND VOYAGER III, VOYAGER III, VOYAGER IV DODGE CARAVAN, GRAND PLYMOUTH VOYAGER 2.4-3.8 01.95-12.08
View partTEDGUM Rear wishbone silent block 00136871
Rear track control arm silent block L/R (in the front/rear) fits: CHRYSLER SEBRING 2.0-3.5 09.06-12.10
View partTEDGUM Torque arm silent block 00136874
Lateral control rod silentblock rear L/R fits: CHRYSLER SEBRING 2.0-3.5 09.06-12.10
View partTEDGUM Torque arm silent block 00136876
Lateral control rod silentblock rear fits: CHRYSLER SEBRING 2.0-3.5 09.06-12.10
View partTEDGUM Front track control arm silent block 00136926
Front track control arm silent block in the front L/R (18x43x28/34 mm) fits: CHRYSLER 300M FORD USA WINDSTAR 2.7-3.8 01.95-09.04
View partTEDGUM Polyurethane suspension sleeve 00136947
Polyurethane stabilizer bushing, 1pcs, inner/rear stabilizer, hardness: 70 Sha, fits: CHRYSLER NEON II, PT CRUISER 1.6/2.0/2.2D 08.99-12.10
View partBuying with Partios
Buying TEDGUM parts through Partios
Are these genuine TEDGUM parts?
- Yes. Every TEDGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source TEDGUM parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for TEDGUM lines that aren't currently available.
Do you supply TEDGUM parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on TEDGUM parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a TEDGUM order?
- It depends on the line. Stocked TEDGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for TEDGUM parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some TEDGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account