Partios Wholesale catalogue

SNR Distributor | Parts

Wheel bearing kit (1,160) · Suspension shock absorber (791) · Multi-v-belt (634) · Axle shaft (621) · Macpherson strut mount (537) · Timing set (belt+pulley) (467) · ABS sensor (387) · Exhaust fumes temperature sensor (309) · 55 further part types (3,727)

8,651 current catalogue lines

About the SNR range

SNR is a multi-system brand rather than a single-product one: the range Partios carries runs to 8,651 lines across 63 distinct part types. The largest groups are wheel bearing kit (1,160), suspension shock absorber (791), multi-V-belt (634), axle shaft (621) and macPherson strut mount (537). Beyond those, 4,423 lines are spread across 57 further part types. That tail includes ABS sensor, exhaust fumes temperature sensor and timing belt tension roll/pulley. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 8,651 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

SNR Clutch release bearing BAC370.02

Clutch thrust bearing fits: MAZDA 323 II, 323 III 1.1-1.7D 11.80-10.95

View part

SNR Clutch release bearing BAC370.03

Thrust bearing

View part

SNR Clutch release bearing BAC370.04

Clutch thrust bearing fits: MAZDA 323 III 1.3-1.7D 08.85-10.95

View part

SNR Clutch release bearing BAC370.05

Clutch thrust bearing fits: KIA SORENTO I, SPORTAGE MAZDA 2, 3, 323 C IV, 323 F IV, 323 F V, 323 F VI, 323 III, 323 P V, 323 S IV, 323 S VI, 5, 6, 626 I, 626 II, 626 III, 626 IV 1.3-3.0D 05.78-

View part

SNR Clutch release bearing BAC370.06

Clutch thrust bearing fits: KIA SORENTO I MAZDA 323 C IV, 323 F IV, 323 S IV, 626 I, 626 II, 626 III, 626 IV, 626 V, 929 II, 929 III, B-SERIE, E, RX-7 II 1.3-3.0 05.78-06.09

View part

SNR Clutch release bearing BAC370.07

Clutch thrust bearing fits: MAZDA 2, 3, 323 F V, 323 F VI, 323 S VI, 5, 6, 626 IV, 626 V, B-SERIE, BT-50, CX-3, CX-30, CX-5, CX-7, MPV II, MX-3, MX-5 III, MX-5 IV, MX-5 RF TARGA 1.3-3.0D 08.91-

View part

SNR Clutch release bearing BAC370.08

Clutch thrust bearing fits: MAZDA 323 III, 6, 929 II, 929 III, RX-7 II, RX-8 1.3-2.5 03.84-03.13

View part

SNR Clutch release bearing BAC373.00

Clutch thrust bearing fits: MITSUBISHI DELICA / SPACE GEAR, GALANT IV, L 300 / DELICA II, L 300 III, L200, L400, LANCER II, PAJERO I, PAJERO II, PAJERO PININ I, STARION 1.8-2.6 09.80-12.07

View part

SNR Clutch release bearing BAC373.01

Clutch thrust bearing fits: MITSUBISHI PAJERO PININ I 1.8 10.99-06.07

View part

SNR Clutch release bearing BAC373.02

Clutch thrust bearing fits: HYUNDAI PONY, PONY / EXCEL MITSUBISHI ASX, CARISMA, COLT V, GALANT V, GALANT VI, GALANT VII, GALANT VIII, GRANDIS, LANCER CARGO, LANCER IV, LANCER V 1.3-2.5 06.84-

View part

SNR Clutch release bearing BAC373.03

Clutch thrust bearing fits: MITSUBISHI L 300 / DELICA II, L 300 III, L200, L200 / TRITON, L400, LANCER F, PAJERO CLASSIC, PAJERO I, PAJERO II, PAJERO III, PAJERO SPORT I 1.2-3.5 12.82-

View part

SNR Clutch release bearing BAC373.04

Clutch thrust bearing fits: HYUNDAI GALLOPER II MITSUBISHI L 300 / DELICA II, L 300 III, L200, L200 / TRITON, L400, LANCER F, PAJERO CLASSIC, PAJERO I, PAJERO II, PAJERO III 1.2-3.5 03.80-

View part

SNR Clutch release bearing BAC374.00

Clutch thrust bearing fits: HONDA ACCORD I, ACCORD II, ACCORD III, CRX I, INTEGRA, PRELUDE II 1.6/1.8/2.0 01.78-12.89

View part

SNR Clutch release bearing BAC374.01

Clutch thrust bearing fits: HONDA ACCORD III, PRELUDE III 2.0 04.86-12.89

View part

SNR Clutch release bearing BAC377.00

Clutch thrust bearing fits: DAEWOO MATIZ OPEL AGILA B SUZUKI ALTO VI, ALTO VII, BALENO, CELERIO, IGNIS III, SPLASH, SWIFT I, SWIFT III, SWIFT IV, SWIFT V, WAGON R+ 0.8-1.3D 10.83-

View part

SNR Clutch release bearing BAC377.01

Clutch thrust bearing fits: SUZUKI CARRY, JIMNY 1.3/1.5 09.98-

View part

SNR Clutch release bearing BAC377.02

Clutch thrust bearing fits: SUBARU JUSTY II SUZUKI BALENO, LIANA, SAMURAI, SJ413, SWIFT II, SWIFT III, VITARA, X-90 1.3-1.9D 09.84-

View part

SNR Clutch release bearing BAC377.03

Clutch thrust bearing fits: SUZUKI GRAND VITARA I 1.6-2.7 03.98-09.05

View part

SNR Clutch release bearing BAC377.04

Clutch thrust bearing fits: OPEL AGILA A SUBARU JUSTY III SUZUKI ALTO IV, ALTO V, BALENO, IGNIS I, IGNIS II, SWIFT II, SWIFT III, WAGON R, WAGON R+ SCANIA R II 1.0-16.4D 03.89-

View part

SNR Clutch release bearing BAC377.05

Clutch thrust bearing fits: SUZUKI GRAND VITARA I, JIMNY, VITARA 1.5D/2.0D 12.94-

View part

SNR Clutch release bearing BAC379.00

Clutch thrust bearing fits: DAIHATSU ROCKY, WILDCAT/ROCKY 2.8D 02.85-12.98

View part

SNR Clutch release bearing BAC381.00

Clutch thrust bearing fits: SUBARU LIBERO 1.2 08.86-02.00

View part

SNR Clutch release bearing BAC381.01

Clutch thrust bearing fits: SUBARU LEONE / LOYALE, LEONE III, XT 1.6/1.8 11.84-12.94

View part

SNR Clutch release bearing BAC381.02

Clutch thrust bearing fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY IV, LEGACY OUTBACK, LEGACY V, OUTBACK, XV DAF 95 1.5-2.5LPG 01.89-

View part

SNR Clutch release bearing BAC381.03

Clutch thrust bearing fits: SUBARU LEGACY III, LEGACY IV, OUTBACK 2.0/2.5/3.0 10.98-04.09

View part

SNR Clutch release bearing BAC381.06

Clutch thrust bearing fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK, WRX, XV 12.03-

View part

SNR Clutch release bearing BAC395.01

Clutch thrust bearing fits: ABARTH RITMO ALFA ROMEO 145, 146, 147, 155, 164, GTV, MITO, SPIDER FIAT 127, 128, BRAVA, BRAVO I, CROMA, DOBLO, DOBLO CARGO 1.0-3.0 03.69-

View part

SNR Clutch release bearing BAC395.02

Clutch thrust bearing fits: FIAT 131, 132, ARGENTA FSO 125P, POLONEZ III 1.3-2.5D 10.67-12.97

View part

SNR Clutch release bearing BAC395.03

Clutch thrust bearing fits: PEUGEOT 504, 505 1.6-2.5D 02.71-10.99

View part

SNR Clutch release bearing BAC395.04

Clutch thrust bearing fits: PEUGEOT 505 2.2/2.8 03.84-12.93

View part

SNR Gearbox bearing BB42814S01

Gearbox bearing (25x52x13/14)

View part

SNR Gearbox bearing BB42815S07

Gearbox bearing (25x62x16)

View part

SNR V-Belt CA10AV1000

V-Belt (width 10, length 1000) fits: MERCEDES 123 (W123), 190 (W201), G (W463), S (C126), S (W126), SL (R107), T1 (601), T1 (601, 611), T1 (B601), T1/TN VOLVO 740, 760, 940, 940 II 1.0-5.0 08.76-

View part

SNR V-Belt CA10AV1010

V-Belt (width 10, length 1010) fits: BMW 3 (E30), 5 (E34) RENAULT 21, ESPACE II, MASTER I 1.6-2.2 08.80-07.98

View part

SNR V-Belt CA10AV1025

V-Belt (width 10, length 1025) fits: VOLVO 740, 940, 940 II, 960 BMW 3 (E30), 3 (E36), 5 (E34) CITROEN XM FIAT 131 ISUZU TROOPER II LAND ROVER 90 I, DEFENDER NISSAN PRIMERA 1.6-3.2 06.78-02.16

View part

SNR V-Belt CA10AV1050

V-Belt (width 10, length 1050) fits: FIAT 127, FIORINO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, PANDA, REGATA, RITMO, UNO HONDA LEGEND I LANCIA DELTA I LAND ROVER 90 I 1.3-2.7 04.81-05.04

View part

SNR V-Belt CA10AV1060

V-Belt (width 10, length 1060) fits: FIAT 127, FIORINO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, PANDA, RITMO, UNO LANCIA DELTA I 1.3/1.3D/1.6 04.81-12.94

View part

SNR V-Belt CA10AV1075

V-Belt (width 10, length 1075) fits: VOLVO 760 FIAT 127, UNO FORD SIERRA, SIERRA I HONDA LEGEND I HYUNDAI GALLOPER II, H100, TERRACAN KIA K2500 MITSUBISHI L200, L200 / TRITON 1.3D-2.8 04.81-

View part

SNR V-Belt CA10AV1090

V-Belt (width 10, length 1090) fits: ALFA ROMEO 164 CHRYSLER VOYAGER II CITROEN XM HYUNDAI GALLOPER II, H-1, H-1 / STAREX, H-1 TRAVEL MITSUBISHI L 300 / DELICA II, L 300 III 2.0-3.0 11.86-

View part

SNR V-Belt CA10AV1105

V-Belt (width 10, length 1105) fits: MERCEDES G (W463), S (C126), S (W126), SL (R107) VOLVO 760, 780 ALFA ROMEO 75, 90 HYUNDAI GALLOPER II, GRACE, H-1, H-1 / STAREX, H100 2.0D-5.0 05.80-12.07

View part

SNR V-Belt CA10AV1130

V-Belt (width 10, length 1130) fits: CITROEN C15 FURGON/NADWOZIE WIELKOPRZESTRZENNE, XM TOYOTA CRESSIDA, LAND CRUISER 80 1.1-4.5 08.82-12.97

View part

SNR V-Belt CA10AV1140

V-Belt (width 10, length 1140) fits: NISSAN PATROL GR IV RENAULT 11, 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, 9, CLIO I, RAPID FURGON/NADWOZIE WIELKOPRZESTRZENNE, SUPER 5 1.0-4.2 09.81-09.98

View part

SNR V-Belt CA10AV1150

V-Belt (width 10, length 1150) fits: MERCEDES SL (R107) VOLVO 740, 760, 780, 940, 940 II, 960 ALFA ROMEO 33 CITROEN CX I, CX II RENAULT SUPER 5, TWINGO I VW GOLF I, SCIROCCO 1.0-4.9 08.75-06.03

View part

SNR V-Belt CA10AV1175

V-Belt (width 10, length 1175) fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II, TRANSIT PEUGEOT 505 RENAULT 11, 9, SUPER 5 SAAB 900 I VW TRANSPORTER T3 1.3-2.8 09.78-03.00

View part

SNR V-Belt CA10AV1200

V-Belt (width 10, length 1200) fits: MERCEDES SL (R107) CHRYSLER VOYAGER I, VOYAGER II RENAULT 11, 9 1.4/2.5/3.5 05.71-09.95

View part

SNR V-Belt CA10AV1210

V-Belt (width 10, length 1210) fits: CHRYSLER NEON 1.8/2.0 05.94-08.99

View part

SNR V-Belt CA10AV1225

V-Belt (width 10, length 1225) fits: CHRYSLER VOYAGER II LAND ROVER 90 I, RANGE ROVER I RENAULT TRAFIC 1.4-3.5 03.80-09.95

View part

SNR V-Belt CA10AV1250

V-Belt (width 10, length 1250) fits: RENAULT SAFRANE I 2.0/2.2 04.92-07.96

View part

Buying with Partios

Buying SNR parts through Partios

Are these genuine SNR parts?

Yes. Every SNR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source SNR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for SNR lines that aren't currently available.

Do you supply SNR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on SNR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a SNR order?

It depends on the line. Stocked SNR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for SNR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some SNR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account