Partios Wholesale catalogue

Snap ON Pricing | Workshop Tools & Equipment

Diagnostic tester cables (50) · Diagnoscope and tester accessories (45) · Diagnostic tester (22) · Software for diagnoscopes and testers (21) · Accessories for calibrating cameras and radar (2) · Device for calibrating cameras and radar (2) · Other special tools (1) · Exhaust-gas analyser and opacimeter set (1) · 1 further part type (1)

142 current catalogue lines

About the SNAP ON range

Partios carries 142 Snap ON lines of workshop tools & equipment, spread across 9 part types. The largest groups are diagnostic tester cables (50), diagnoscope and tester accessories (45), diagnostic tester (22), software for diagnoscopes and testers (21) and accessories for calibrating cameras and radar (2). Those six account for most of the catalogue; the remaining 3 lines are spread across 3 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes other special tools, exhaust-gas analyser and opacimeter set and a/C service station. The range suits garages and workshops equipping or restocking a bay, and equipment dealers. Tooling is bought either as a one-off capital order or as a replacement for something worn out, which makes pricing the usual deciding factor. With 142 lines, it is a targeted range rather than a wide one.

Catalogue products

SNAP ON Diagnostic tester DJT70001060

Diagnostic tester set, JALTEST, JALTEST AGRI interface for PC, software type: without software

View part

SNAP ON Diagnostic tester DJT70001066

Diagnostic tester set, SNAP ON, TRUCK interface for PC, software type: Subscription - 60month

View part

SNAP ON Diagnostic tester cables DJT70002001

Fault tester cable, tester model: JALTEST, number of pins: 9

View part

SNAP ON Diagnostic tester cables DJT70002024

Diagnostic cables set, tester model: JALTEST, make JALTEST, diagnostic environment: TRUCK, number of pins: 9

View part

SNAP ON Diagnostic tester cables DJT70002028

Diagnostic cables set, tester model: JALTEST, make JALTEST, number of pins: 9

View part

SNAP ON Diagnoscope and tester accessories DJTJDC113.9

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDC115.9

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDC117A

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDC121A9

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDC218A

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDC219A

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDC305A

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTJDCOBD5

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories DJTOBD202

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories EAA0355L73A

SNAP ON Adaptor MB-3/DL-14 ( Sprinter, LT)

View part

SNAP ON Diagnoscope and tester accessories EAA0355L74A

SNAP ON Adaptor BMW-1B

View part

SNAP ON Diagnoscope and tester accessories EAC0056L00A

SNAP SINGLE FLAG COP ADAPTOR

View part

SNAP ON Diagnoscope and tester accessories EAC0056L03A

SNAP ON ADAPTOR DO UKŁ. ZAPŁONOWEGO SZEREGOWY 4 CYL.

View part

SNAP ON Diagnoscope and tester accessories EAK0253B01H

Zestaw przewodów do sam. USA do PDL4000/5500/5600

View part

SNAP ON Diagnoscope and tester accessories EAK0276L01A

Diagnoscope and tester accessory

View part

SNAP ON Diagnoscope and tester accessories EAK0294B22A

Diagnoscope and tester accessory

View part

SNAP ON Accessories for calibrating cameras and radar EAK0370J05A

View part

SNAP ON Accessories for calibrating cameras and radar EAK0370J36A

View part

SNAP ON Diagnostic tester cables EAX0024B30A

Fault tester cable, tester model: PDL5500

View part

SNAP ON Diagnoscope and tester accessories EAX0068L01A

Przewód DA-5 ADAPTOR HD 26 to DM 15 (przewód główny połączeniowy) do testerów PDL - wymagany do podłączenia przewodów do starszych marek

View part

SNAP ON Diagnostic tester cables EAX0068L05A

Fault tester cable, tester model: PDL3000/PDL4000/PDL5500, make SNAP-ON SUN, diagnostic environment: PDL, number of pins: 16

View part

SNAP ON Diagnostic tester cables EAX0068L26A

Main OBD cable, make SNAP-ON SUN, diagnostic environment: PDL, number of pins: 16, with built-in lamp

View part

SNAP ON Diagnoscope and tester accessories EAX0072L17A

Przewód do testera usterek DOIP , model testera: PDL3200/4100/5500/5600/8000

View part

SNAP ON A/C service station EEAC124C

AC service station COOLCARE DUAL GAS (R1234yf/R134a)

View part

SNAP ON Diagnostic tester EECT117A

Diagnostic tester, SNAP ON, OBD-II BREAKOUT BOX CAR TRUCK freestanding set

View part

SNAP ON Diagnostic tester cables EEPV302AT

Adaptor, tester model: PDL5500

View part

SNAP ON Device for calibrating cameras and radar EESEEU505B/D

Camera and radar calibration Tru Point, for callibration: cameras, ex-display product

View part

SNAP ON Diagnoscope and tester accessories EESX306SP

WAVEFORM SCOPE DEMO BOARD

View part

SNAP ON Diagnoscope and tester accessories EETA308D

SNAP ON Cęgi amperowe do PDL5500/PDL5600 ( umożliwia testowanie przewodów o średnicy do 1/2 " . Zakres - 20-60A

View part

SNAP ON Diagnoscope and tester accessories EETHEU100A

Termowizyjna kamera diagnostyczna z wbudowaną bazą gotowych danych i testów ( oprogramowanie w języku polskim)

View part

SNAP ON Diagnostic tester JALTEST LINK V9

Diagnostic tester, SNAP ON, JALTEST interface for PC, software type: without software

View part

SNAP ON Diagnostic tester JALTEST PTE

Diagnostic tester, JALTEST, Portable Trailer e-Supply

View part

SNAP ON Diagnostic tester JALTEST/SET BASIC MKT

Diagnostic tester JALTEST JALTEST PTE CV TRUCK interface for PC, software type: Subscription, software validity period: 12, in the set: iso 7638 pipe, obd cable

View part

SNAP ON Diagnostic tester cables JDC110A

Akcesoria i części zamienne do testera usterek

View part

SNAP ON Diagnoscope and tester accessories JDC201M2

Diagnoscope and tester accessory Connecting hose

View part

SNAP ON Diagnostic tester cables JDC203A

Fault tester cable, tester model: JALTEST, make Mercedes-Benz

View part

SNAP ON Diagnostic tester cables JDC206A

Fault tester cable, tester model: JALTEST, make IVECO, diagnostic environment: TRUCK

View part

SNAP ON Diagnostic tester cables JDC207A

Fault tester cable, tester model: JALTEST, make MAN, number of pins: 4

View part

SNAP ON Diagnoscope and tester accessories JDC20AM2

Diagnoscope and tester accessory

View part

SNAP ON Diagnostic tester cables JDC210A

Fault tester cable, tester model: JALTEST, make MAN, diagnostic environment: TRUCK, number of pins: 37, series 2000

View part

SNAP ON Diagnostic tester cables JDC213E1

Adaptor kit, tester model: JALTEST, for diagnostic tester, quantity per set: 1 pcs

View part

SNAP ON Diagnostic tester cables JDC217.9

Fault tester cable, tester model: JALTEST, make DEUTSCH, diagnostic environment: CAR, number of pins: 9

View part

SNAP ON Diagnoscope and tester accessories JDC217M3

View part

Buying with Partios

Buying SNAP ON parts through Partios

Are these genuine SNAP ON parts?

Yes. Every SNAP ON line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source SNAP ON parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for SNAP ON lines that aren't currently available.

Do you supply SNAP ON parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on SNAP ON parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a SNAP ON order?

It depends on the line. Stocked SNAP ON items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for SNAP ON parts?

No. There's no minimum order value or quantity on a Partios trade account. Some SNAP ON lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account