Partios Wholesale catalogue

SKF Distributor | Parts

Drive belt (8,484) · Sprocket wheel (5,249) · Industrial bearing (3,049) · Pulley (2,754) · Parts of machines (1,641) · Wheel bearing kit (1,450) · Axle shaft (1,291) · Multi-v-belt (1,040) · 151 further part types (14,072)

38,594 current catalogue lines

About the SKF range

SKF is a multi-system brand rather than a single-product one: the range Partios carries runs to 38,594 lines across 159 distinct part types. The largest groups are drive belt (8,484), sprocket wheel (5,249), industrial bearing (3,049), pulley (2,754) and parts of machines (1,641). Beyond those, 16,403 lines are spread across 153 further part types. That tail includes axle shaft, multi-V-belt and brake disc. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 38,594 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

SKF Tie rod (with no end) VKDY 821050

Tie rod (with no end) L/R (length: 225mm) fits: LEXUS ES TOYOTA CAMRY, WINDOM 2.0-3.3 10.96-11.06

View part

SKF Tie rod (with no end) VKDY 821052

Tie rod (with no end) L/R (length: 315mm) fits: TOYOTA ISIS, RAV 4 II 1.8-2.4 05.00-08.14

View part

SKF Tie rod (with no end) VKDY 821053

Tie rod (with no end) L/R (length: 130,7mm) fits: TOYOTA IQ ASTON MARTIN CYGNET 1.0-1.4D 01.09-12.15

View part

SKF Tie rod (with no end) VKDY 822018

Tie rod (with no end) L/R (length: 226mm, with synthetic grease) fits: NISSAN MICRA IV 1.2 05.10-

View part

SKF Tie rod (with no end) VKDY 822019

Tie rod (with no end) L/R (length: 275mm) fits: NISSAN QASHQAI II RENAULT KADJAR 1.2-2.0 11.13-

View part

SKF Tie rod (with no end) VKDY 823011

Tie rod (with no end) L/R (length: 183mm, with synthetic grease) fits: HONDA CIVIC IX, CIVIC VIII, CIVIC X 1.4-2.4 09.05-

View part

SKF Tie rod (with no end) VKDY 823012

Tie rod (with no end) L/R (length: 253mm, with synthetic grease) fits: HONDA JAZZ IV, JAZZ V 1.3/1.5/1.5H 09.15-

View part

SKF Tie rod (with no end) VKDY 823015

Tie rod (with no end) L/R (length: 324mm) fits: HONDA HR-V 1.6 03.99-09.05

View part

SKF Tie rod (with no end) VKDY 823018

Tie rod (with no end) L (length: 233mm) fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08

View part

SKF Tie rod (with no end) VKDY 823019

Tie rod (with no end) R (length: 233mm) fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08

View part

SKF Tie rod (with no end) VKDY 823020

Tie rod (with no end) L/R (length: 515mm) fits: HONDA CIVIC VII, CIVIC VIII, STREAM 1.3H-2.2D 11.00-12.13

View part

SKF Tie rod (with no end) VKDY 823021

Tie rod (with no end) L/R (length: 212,5mm) fits: HONDA CIVIC X, CIVIC XI, ZR-V 1.0-2.0H 09.15-

View part

SKF Tie rod (with no end) VKDY 823022

Tie rod (with no end) L/R (length: 253,1mm) fits: HONDA CITY V, INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15

View part

SKF Tie rod (with no end) VKDY 823024

Tie rod (with no end) L/R (length: 289,4mm) fits: HONDA HR-V 1.5/1.6D 01.15-

View part

SKF Tie rod (with no end) VKDY 824004

Tie rod (with no end) L/R (length: 262mm) fits: MAZDA CX-3 1.5D/1.8D/2.0 02.15-

View part

SKF Tie rod (with no end) VKDY 824021

Tie rod (with no end) L/R (length: 234mm) fits: MAZDA MX-5 III 1.8/2.0 03.05-12.14

View part

SKF Tie rod (with no end) VKDY 824024

Tie rod (with no end) L/R (length: 342,5mm) fits: MAZDA 323 C IV, 323 F IV, 323 S IV 1.3-1.8 04.87-10.96

View part

SKF Tie rod (with no end) VKDY 824025

Tie rod (with no end) L/R (length: 244mm) fits: MAZDA 2 1.5/1.5D/1.5H 08.14-

View part

SKF Tie rod (with no end) VKDY 824026

Tie rod (with no end) L/R (length: 202mm) fits: MAZDA E, RX-7 II 1.3/2.0/2.2D 01.83-12.03

View part

SKF Tie rod (with no end) VKDY 825001

Tie rod (with no end) L/R (length: 197,5mm) fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17

View part

SKF Tie rod (with no end) VKDY 825002

Tie rod (with no end) L/R (length: 212mm) fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17

View part

SKF Tie rod (with no end) VKDY 825010

Tie rod (with no end) L fits: HYUNDAI ACCENT IV KIA RIO III 1.4/1.6/1.6D 11.10-

View part

SKF Tie rod (with no end) VKDY 825011

Tie rod (with no end) R (length: 232,5mm) fits: HYUNDAI ACCENT IV KIA RIO III 1.2-1.6D 11.10-

View part

SKF Tie rod (with no end) VKDY 825029

Tie rod (with no end) L/R fits: HYUNDAI SANTA FÉ III 2.0D/2.2D/2.4 09.12-12.18

View part

SKF Tie rod (with no end) VKDY 825041

Tie rod (with no end) R fits: KIA SORENTO I 2.4-3.5 08.02-12.11

View part

SKF Tie rod (with no end) VKDY 825042

Tie rod (with no end) L/R (length: 279mm, with synthetic grease) fits: HYUNDAI ACCENT V, SOLARIS KIA RIO IV, STONIC 1.0-1.6D 01.17-

View part

SKF Tie rod (with no end) VKDY 825043

Tie rod (with no end) L/R (length: 175/216mm) fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-

View part

SKF Tie rod (with no end) VKDY 825512

Tie rod (with no end) R (length: 257mm) fits: HYUNDAI H-1 CARGO, H-1 TRAVEL 2.4/2.5D 02.08-

View part

SKF Tie rod (with no end) VKDY 825513

Tie rod (with no end) L/R (length: 358mm) fits: CITROEN C4 AIRCROSS MITSUBISHI ASX, ECLIPSE CROSS, LANCER VIII, OUTLANDER III PEUGEOT 4008 1.5-3.0 02.08-

View part

SKF Tie rod (with no end) VKDY 826006

Tie rod (with no end) L/R (length: 300,5mm) fits: SUZUKI SWIFT, SWIFT II 1.0/1.3/1.6 03.89-12.05

View part

SKF Tie rod (with no end) VKDY 826008

Tie rod (with no end) L/R fits: SUZUKI SWIFT IV 1.2-1.6 10.10-04.17

View part

SKF Tie rod (with no end) VKDY 826009

Tie rod (with no end) L/R (length: 363mm) fits: SUZUKI GRAND VITARA II, XL7 1.6-3.6 04.05-

View part

SKF Tie rod (with no end) VKDY 826010

Tie rod (with no end) L/R (length: 331,5mm) fits: SUZUKI S-CROSS, SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

SKF Tie rod (with no end) VKDY 828002

Tie rod (with no end) L/R (length: 342mm) fits: SUBARU FORESTER, IMPREZA, LEGACY VI, LEVORG, OUTBACK, TRIBECA, WRX, XV 1.6-3.6 01.05-

View part

SKF Tie rod (with no end) VKDY 829000

Tie rod (with no end) L/R (length: 337mm, with synthetic grease) fits: ISUZU D-MAX I, D-MAX II 1.9D/2.5D/3.0D 01.07-

View part

SKF Tie rod (with no end) VKDY 829001

Tie rod (with no end) L/R (length: 345mm) fits: ISUZU D-MAX II 1.9D/2.5D 04.12-12.22

View part

SKF Tie rod (with no end) VKDY 829002

Tie rod (with no end) L/R fits: ISUZU D-MAX I, D-MAX II 2.5D/3.0D 05.02-12.18

View part

SKF Tie rod (with no end) VKDY 829003

Tie rod (with no end) L/R (length: 311mm) fits: ISUZU D-MAX I, RODEO 2.2-3.2 09.97-12.12

View part

SKF Tie rod end VKDY 911000

Tie rod end L fits: TOYOTA AVENSIS 1.6-2.4 01.03-11.08

View part

SKF Tie rod end VKDY 911001

Tie rod end R fits: TOYOTA AVENSIS 1.6-2.4 01.03-11.08

View part

SKF Wheel suspension track control arm, rear VKDY 911002

Rear axle track control arm L (rear, transverse) fits: TOYOTA AVENSIS 1.6-2.4 01.03-11.08

View part

SKF Wheel suspension track control arm, rear VKDY 911003

Rear axle track control arm R (rear, transverse) fits: TOYOTA AVENSIS 1.6-2.4 01.03-11.08

View part

SKF Lubricants and greases VKG 1/0.2

SKF Bearing Grease [tube] NLGI 2 200 g. Temperature Range in ° C: -30 to +120

View part

SKF Lubricants and greases VKG 1/0.4

SKF Bearing Grease [insert] 0.42 L NLGI 2 Operating Temperature Range in ° C: -30 to +120

View part

SKF Lubricants and greases VKG 1/1

SKF Bearing Grease [container] 1 kg. NLGI 2 Operating Temperature Range in ° C: -30 to +120

View part

SKF Lubricants and greases VKG 1/18

SKF Bearing Grease [container] 18 kg. NLGI 2 Operating Temperature Range in ° C: -30 to +120

View part

SKF Lubricants and greases VKG 1/5

SKF Bearing Grease [container] 5 kg. NLGI 2 Operating Temperature Range in ° C: -30 to +120

View part

SKF Lubricants and greases VKG 1/50

SKF Bearing Grease [barrel] of 50 kg. NLGI 2 Operating Temperature Range in ° C: -30 to +120

View part

Buying with Partios

Buying SKF parts through Partios

Are these genuine SKF parts?

Yes. Every SKF line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source SKF parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for SKF lines that aren't currently available.

Do you supply SKF parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on SKF parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a SKF order?

It depends on the line. Stocked SKF items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for SKF parts?

No. There's no minimum order value or quantity on a Partios trade account. Some SKF lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account