Partios Wholesale catalogue

Sachs Distributor | Suspension & Steering

Coil spring (4,023) · Suspension shock absorber (3,735) · Clutch disc (1,846) · Clutch assy (1,673) · Clutch cover (1,401) · Clutch plates (1,129) · Clutch release bearing (536) · Macpherson strut mount (446) · 53 further part types (2,405)

16,461 current catalogue lines

About the SACHS range

Sachs is a suspension & steering brand, and the range Partios carries reaches across 61 part types. The largest groups are coil spring (4,023), suspension shock absorber (3,735), clutch disc (1,846), clutch assy (1,673) and clutch cover (1,401). Beyond those, 3,387 lines are spread across 55 further part types. That tail includes clutch release bearing, macPherson strut mount and shock absorber assembly kit. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 16,461 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

SACHS Clutch disc 1866 065 001

DISK SZEPL clutch disc. BAUMASCHINEN_KRAFTFAHRZEUGE

View part

SACHS Clutch disc 1866 066 001

DISK SZEPL clutch disc. SONSTIGE EUROPE / FORD NEW HOLLAND

View part

SACHS Clutch disc 1866 068 002

DISK SZEPL clutch disc. SONSTIGE EUROPE / FORD NEW HOLLAND

View part

SACHS Clutch disc 1866 090 001

DISK SZEPL clutch disc. BAUMASCHINEN_KRAFTFAHRZEUGE

View part

SACHS Clutch disc 1866 096 002

Clutch disc/plate (250mm, new) fits: IVECO P/PA, P/PA-HAUBENFAHRZEUGE RVI G, MANAGER 07.83-10.96

View part

SACHS Clutch disc 1866 098 033

DISK SZEPL clutch disc. DAIMLER-CHRYSLER

View part

SACHS Clutch disc 1866 104 001

SACHS damper clutch disc 267 mm

View part

SACHS Clutch disc 1866 107 001

Clutch disc/plate (190mm)

View part

SACHS Clutch disc 1866 122 002

Clutch disc/plate (352mm)

View part

SACHS Clutch disc 1866 122 006

DISK SZEPL clutch disc. SONSTIGE EUROPE / FORD NEW HOLLAND

View part

SACHS Clutch disc 1866 130 001

SACHS Tarcza sprzęgła 250 mm IRISBUS

View part

SACHS Clutch disc 1866 148 001

Clutch disc/plate (466mm, Vibration damper) fits: LIEBHERR

View part

SACHS Clutch disc 1866 157 101

Clutch disc/plate ceramic (345mm number of paddles: 6)

View part

SACHS Clutch disc 1866 157 103

SACHS clutch disc damper 345 mm LIEBHERR

View part

SACHS Clutch disc 1866 600 002

Clutch disc/plate (354mm) fits: CASE IH MX MC CORMICK MTX 01.91-

View part

SACHS Clutch disc 1866 600 003

Clutch disc/plate organic (295mm full profile), LANDINI 125, 135, 145, 165 MC CORMICK F 100 2WD, F 100 4WD, F 110 2WD, F 110 4WD, F 120 2WD, F 120 4WD, F 70 2WD, F 70 4WD, F 80 2WD, F 80 4WD

View part

SACHS Clutch disc 1866 600 004

Clutch disc/plate (263mm) fits: LANDINI 100 F REX, 110 F REX, 120 F REX, 60 F REX, 70 F REX, 70 GE REX, 75 F REX, 80 F REX, 85 F REX, 85 GE REX, 90 F REX, 100, 105, 80, 85, 90, 95

View part

SACHS Torsion damper 1866 600 005

Torsion damper (diameter: 225mm, number of teeth: 16 pcs 31x35-16N full profile) fits: RENAULT 103-52 TA, 103-52 TE, 103-52 TS, 103-52 TX, 103-54 TA, 103-54 TE, 103-54 TS, 103-54 TX, 106-54

View part

SACHS Torsion damper 1866 600 007

Torsion damper (diameter: 295mm, number of teeth: 26 pcs 39x42,5-26N) fits: CLAAS 610 RX, 610 RZ, 616 RX, 616 RZ, 620 RX, 620 RZ, 626 RX, 626 RZ, 630 RX, 630 RZ, 636 RZ, 640 RZ, 696 RZ, 710 RZ

View part

SACHS Torsion damper 1866 600 009

Torsion damper (diameter: 352mm, number of teeth: 26 pcs 39x42,5-26N) fits: CLAAS 815 RZ, 825 RZ, 826 RZ, 826 RZ POWERSHIFT, 915 RZ, 925 RZ, 926 RZ, 935 RZ, 936 RZ

View part

SACHS Torsion damper 1866 600 010

Torsion damper (diameter: 263mm, number of teeth: 10 pcs 1 1/8"-10N) fits: FORD 5640, 5640 SLE, 6640, 6640 SLE, 7740, 7740 SLE, 7840, 7840 SLE, 8240, 8240 SLE, 8340, 8340 SLE NEW HOLLAND 100, 110

View part

SACHS Torsion damper 1866 600 011

Torsion damper (diameter: 348mm, number of teeth: 14 pcs 35x40-14N full profile), CASE IH 120 2WD, 120 4WD, 130 2WD, 130 4WD, 135, 140 2WD, 140 4WD, 150, 155 2WD, 155 4WD, 165, 180 FIAT 130-90

View part

SACHS Torsion damper 1866 600 012

Torsion damper (diameter: 350mm, number of teeth: 14 pcs 35x40-14N full profile), CASE IH 120 2WD, 120 4WD, 130 2WD, 130 4WD, 135, 140 2WD, 140 4WD, 150, 155 2WD, 155 4WD, 165, 180 FIAT 130-90

View part

SACHS Clutch disc 1866 600 013

Clutch disc/plate organic (263mm full profile) fits: NEW HOLLAND T5030 2WD, T5030 4WD, T5040 2WD, T5040 4WD, T5050 2WD, T5050 4WD, T5060 4WD, T5070, TL 100A 2WD, TL 100A 4WD, TL 70A 2WD

View part

SACHS Torsion damper 1866 600 014

Torsion damper (diameter: 352mm, number of teeth: 26 pcs 39x42,5-26N) fits: MASSEY FERGUSON 8210, 8220, 8220 XTRA, 8240, 8240 XTRA, 8250, 8250 XTRA, 8260, 8260 LST, 8260 XTRA, 8270, 8270 XTRA

View part

SACHS Torsion damper 1866 600 015

Torsion damper (diameter: 348mm, number of teeth: 26 pcs 39x42,5-26N) fits: MASSEY FERGUSON 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8220 XTRA, 8240, 8240 XTRA, 8250, 8250 XTRA

View part

SACHS Torsion damper 1866 600 017

Torsion damper (diameter: 295mm, number of teeth: 26 pcs 39x42,5-26N) fits: AGCO 100, 100A, 120, 120A CHALLENGER MT 525 B, MT 535 B, MT 545 B MASSEY FERGUSON 180, 260, 270, 290, 465, 475, 5465

View part

SACHS Torsion damper 1866 600 018

Torsion damper (diameter: 320mm, number of teeth: 25 pcs 38,2x41,5-25N) fits: MASSEY FERGUSON 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370

View part

SACHS Torsion damper 1866 600 019

Torsion damper (diameter: 348mm, number of teeth: 26 pcs 39x42,5-26N) fits: MASSEY FERGUSON 6485, 6490, 6495, 6497, 6499 (PERKINS 6 CYL), 6499 (SISU 74 CTA 6 CYL), 7619, 7620, 7622, 8210, 8220

View part

SACHS Torsion damper 1866 600 020

Torsion damper (diameter: 116mm, number of teeth: 10 pcs 22x25-10N) fits: NEW HOLLAND TL 100 2WD, TL 100 4WD, TL 70A 2WD, TL 70A 4WD, TL 80, TL 90 2WD, TL 90 4WD

View part

SACHS Torsion damper 1866 600 021

Torsion damper (diameter: 263mm, number of teeth: 24 pcs 46x50-24N full profile), DEUTZ FAHR 100 A, 75 A, 85 A, 95 A SAME 95, 85

View part

SACHS Clutch disc 1866 600 022

Clutch disc/plate (348mm, full profile) fits: CASE IH PUMA CASE-STEYR CVT NEW HOLLAND T7, TM 01.02-

View part

SACHS Clutch disc 1866 600 023

Clutch disc/plate (354mm, full profile) fits: CASE IH MX MC CORMICK MC 01.98-

View part

SACHS Clutch disc 1866 600 024

Clutch disc/plate organic (295mm full profile) fits: CLAAS 540 RX, 540 RZ, 546 RX, 546 RZ, 550 RX, 550 RZ, 556 RX, 556 RZ, 566 RX, 566 RZ

View part

SACHS Torsion damper 1866 600 026

Torsion damper (diameter: 348mm, number of teeth: 26 pcs 39x42,5-26N) fits: CLAAS 810, 820, 830, 850

View part

SACHS Torsion damper 1866 600 028

Torsion damper (diameter: 348mm, number of teeth: 26 pcs 39x42,5-26N) fits: CLAAS 715 RZ, 725 RZ, 735 RZ, 816 RZ, 826 RZ, 826 RZ QUADRISHIFT, 836 RZ, 810, 820, 830, 850

View part

SACHS Torsion damper 1866 600 029

Torsion damper (diameter: 348mm, number of teeth: 16 pcs 31x35-16N) fits: CASE IH 100, 110, 115, 120, 125, 130, 140, 100 MAXXUM, 100 MAXXUM X, 100 PRO, 110 MAXXUM, 110 MAXXUM X, 110 PRO

View part

SACHS Torsion damper 1866 600 030

Torsion damper (diameter: 137mm) fits: CASE IH 1070 U, 1070 U MAXXIMA, 1080 U, 1080 U MAXXIMA, 1090 U, 1090 U MAXXIMA, 1100 U, 1100 U MAXXIMA, 105, 75, 85, 95 NEW HOLLAND T5030 2WD, T5030 4WD

View part

SACHS Torsion damper 1866 600 031

Torsion damper (diameter: 122mm, number of teeth: 8 pcs 32x35-8N) fits: CASE IH 115, 125, 130, 130 CVT, 130 CVX, 140, 145, 145 CVT, 145 CVX, 155, 160, 160 CVT, 160 CVX, 165, 180

View part

SACHS Torsion damper 1866 600 033

Torsion damper (diameter: 133mm, number of teeth: 21 pcs) fits: MASSEY FERGUSON 5425, 5435, 5445, 5455, 5460, 5465

View part

SACHS Torsion damper 1866 600 034

Torsion damper (diameter: 373mm, number of teeth: 16 pcs 31x35) fits: DEUTZ FAHR 100, 100 MK2, 100 MK3, 105, 105 MK2, 105 MK3, 4.70 MK1, 4.80 MK1, 4.85 MK1, 4.90 MK1, 4.95 MK1, 6.01, 80 MK2

View part

SACHS Torsion damper 1866 600 036

Torsion damper (diameter: 395mm, number of teeth: 16 pcs 31x35) fits: CASE IH 100, 110, 115, 120, 125, 130, 140 CASE-STEYR 4120 PROFI, 4130 PROFI, 4110, 4110 CLASSIC, 4120, 4130, 4130 CLASSIC

View part

SACHS Torsion damper 1866 600 037

Torsion damper (diameter: 208mm) fits: JOHN DEERE 6100, 6100 D, 6100 SE, 6200, 6200 SE, 6300, 6300 SE, 6400, 6400 SE, 6500

View part

SACHS Clutch disc 1866 600 038:N

Clutch disc/plate

View part

SACHS Torsion damper 1866 600 039

Torsion damper (diameter: 330mm, number of teeth: 16 pcs) fits: CASE IH 55 A 4WD, 55 C, 65 A, 65 C, 75 A, 75 C CASE-STEYR 4055S KOMPAKT, 4065S KOMPAKT NEW HOLLAND T4.55 2WD, T4.55 4WD

View part

SACHS Torsion damper 1866 600 040

Torsion damper (diameter: 328mm, number of teeth: 21 pcs) fits: CLAAS 220, 230, 240, 330, 340, 350 DEUTZ FAHR 5080 D, 5080 G, 5090 D, 5090 G, 5090.4 D, 5090.4 G, 5100, 5100 C, 5100 G, 5100 P

View part

SACHS Torsion damper 1866 600 041

Torsion damper (diameter: 348mm, number of teeth: 16 pcs 35) fits: CASE IH 140, 100, 110, 115, 120, 125, 130, 100 MAXXUM, 100 MAXXUM X, 100 PRO, 110 MAXXUM, 110 MAXXUM X, 110 PRO, 115 MAXXUM

View part

SACHS Torsion damper 1866 600 042

Torsion damper (diameter: 348mm, number of teeth: 26 pcs 25x39,4) fits: MASSEY FERGUSON 5445 NEW HOLLAND TM 115, TM 125, TM 135, TM 150, TM 165

View part

Buying with Partios

Buying SACHS parts through Partios

Are these genuine SACHS parts?

Yes. Every SACHS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source SACHS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for SACHS lines that aren't currently available.

Do you supply SACHS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on SACHS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a SACHS order?

It depends on the line. Stocked SACHS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for SACHS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some SACHS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account