Partios Wholesale catalogue

SACHS1 Distributor | Transmission & Driveline

Clutch assy (1,022) · Dual mass flywheel (466) · Hydro-kinetic coupling (converter, wandler) (exchange core) (123) · Clutch disc (37) · Clutch cover (26) · Air module (19) · Electric clutch servo (19) · Fluid coupling (converter, wandler) (13) · 8 further part types (20)

1,752 current catalogue lines

About the SACHS1 range

Partios carries 1,752 SACHS1 lines, almost all transmission & driveline. It has 1,022 of them under a single part type, clutch assy. Behind it the largest groups are dual mass flywheel (466), hydro-kinetic coupling (converter, wandler) (exchange core) (123), clutch disc (37), clutch cover (26) and air module (19). Those six account for most of the catalogue; the remaining 52 lines are spread across 10 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes electric clutch servo, fluid coupling (Converter, Wandler) and rigid flywheel. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 1,752 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

SACHS1 Clutch assy 3000 990 680

Self-adjusting clutch kit (250mm) fits: OPEL ZAFIRA C 1.6D 02.13-03.19

View part

SACHS1 Clutch assy 3000 990 682

Clutch kit with hydraulic bearing (240mm) fits: OPEL ASTRA J, ASTRA J GTC, CASCADA, ZAFIRA C 2.0/2.0D 09.09-11.18

View part

SACHS1 Clutch assy 3000 990 685

Self-adjusting clutch kit with hydraulic bearing (240mm) fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 2.0D 07.08-03.17

View part

SACHS1 Clutch assy 3000 990 689

Clutch kit with hydraulic bearing (220mm) fits: RENAULT CLIO III, GRAND SCENIC III, LAGUNA III, MEGANE, MEGANE III, SCENIC II, SCENIC III 1.6/1.6ALK/1.6LPG 10.05-03.17

View part

SACHS1 Clutch assy 3000 990 691

Clutch kit with hydraulic bearing (235mm) fits: HYUNDAI I30 KIA CEE'D, CEED, PRO CEE'D, PROCEED, XCEED 1.4-1.6 06.13-

View part

SACHS1 Clutch assy 3000 990 692

Clutch kit with hydraulic bearing (260mm) fits: LAND ROVER DEFENDER 2.2D/2.4D 10.06-02.16

View part

SACHS1 Clutch assy 3000 990 694

Self-adjusting clutch kit (250mm) fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 2.0-2.8 07.08-

View part

SACHS1 Clutch assy 3000 990 695

Clutch kit with hydraulic bearing (250mm) fits: CHEVROLET MALIBU OPEL CASCADA, INSIGNIA A, INSIGNIA A COUNTRY, ZAFIRA C SAAB 9-5 2.0D 07.08-

View part

SACHS1 Clutch assy 3000 990 696

Self-adjusting clutch kit (240mm) fits: FORD FIESTA VII, FOCUS IV, KUGA III, PUMA 1.5 04.18-

View part

SACHS1 Clutch assy 3000 990 701

Clutch kit with hydraulic bearing (228mm) fits: VOLVO S40 I, S60 I, S80 I, V40, V70 II 1.8-2.5 07.95-04.10

View part

SACHS1 Rigid flywheel 3021 600 285

Rigid flywheel 230mm fits: AUDI A1 SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA II, RAPID, ROOMSTER, ROOMSTER PRAKTIK VW POLO V 1.6D 05.09-12.19

View part

SACHS1 Rigid flywheel 3021 600 288

Rigid flywheel 230mm fits: AUDI A3 SEAT ALTEA, ALTEA XL, ARONA, ATECA, IBIZA V, LEON, LEON SC, LEON ST SKODA KAMIQ, KAROQ, OCTAVIA II, OCTAVIA III, SCALA, SUPERB II, SUPERB III 1.6D/2.0D 02.09-

View part

SACHS1 Rigid flywheel 3021 600 294

Rigid flywheel 230mm fits: SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA II, RAPID, ROOMSTER, ROOMSTER PRAKTIK VW POLO V, SHARAN 1.6D/1.9D 09.96-12.19

View part

SACHS1 Rigid flywheel 3021 600 295

Rigid flywheel 230mm fits: AUDI A1 SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA III, RAPID VW POLO V 1.4D 02.14-12.22

View part

SACHS1 Dual mass flywheel 3021 600 312

Dual mass flywheel (215mm) fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415), CLA (C117) 1.5D 06.01-

View part

SACHS1 Clutch cover 3082 000 037

Clutch cover (240mm) fits: PORSCHE 911, 911 TARGA, BOXSTER 3.2/3.4/3.6 08.97-08.05

View part

SACHS1 Clutch cover 3082 001 303

Clutch cover (200mm) fits: PORSCHE 928 4.7/5.0 09.79-12.86

View part

SACHS1 Clutch cover 3082 001 522

Clutch cover (240mm) fits: PORSCHE 911 3.3/3.6/3.8 08.90-12.12

View part

SACHS1 Clutch cover 3082 018 431

SACHS 225mm Clutch pressure. Porsche 911/Targa 2.2 69-72

View part

SACHS1 Clutch cover 3082 087 031

Clutch cover (225mm) fits: PORSCHE 911, 911 TARGA, 924 2.0/3.0/3.2 03.74-08.89

View part

SACHS1 Clutch cover 3082 090 131

Clutch cover (240mm) fits: PORSCHE 911, 911 TARGA 3.3 09.77-11.90

View part

SACHS1 Clutch cover 3082 152 031

Clutch cover (240mm) fits: PORSCHE 944 2.5 08.85-07.91

View part

SACHS1 Clutch cover 3082 175 232

Clutch cover (240mm) fits: PORSCHE 911 3.2/3.6 08.83-05.94

View part

SACHS1 Clutch cover 3082 213 131

Clutch cover (240mm) fits: PORSCHE 911 3.6 12.88-05.94

View part

SACHS1 Clutch cover 3082 213 133

Clutch cover (240mm) fits: PORSCHE 911, 911 TARGA, 968 3.0/3.6/3.8 12.88-09.97

View part

SACHS1 Clutch cover 3082 213 136

Clutch cover (240mm) fits: PORSCHE 911 3.6/3.8 03.99-12.12

View part

SACHS1 Clutch cover 3082 225 201

Clutch cover (250mm) fits: LAMBORGHINI DIABLO 5.7 01.90-08.98

View part

SACHS1 Clutch cover 3082 600 513

Clutch cover (240mm) fits: OPEL FRONTERA B 2.2D 09.98-07.04

View part

SACHS1 Clutch cover 3082 600 549

Clutch cover (240mm) fits: OPEL FRONTERA B 2.2D 09.98-07.04

View part

SACHS1 Clutch cover 3082 600 554

Clutch cover (240mm) fits: CITROEN JUMPER I PEUGEOT BOXER 2.5D 03.94-04.02

View part

SACHS1 Clutch cover 3082 600 578

Clutch cover (230mm)

View part

SACHS1 Clutch cover 3082 600 587

Clutch cover (228mm) fits: FORD FOCUS I 2.0 03.02-11.04

View part

SACHS1 Clutch cover 3082 600 703

Clutch cover (250mm)

View part

SACHS1 Clutch cover 3082 600 712

Clutch cover (240mm)

View part

SACHS1 Clutch cover 3082 600 742

Clutch cover (228mm) fits: MITSUBISHI LANCER VI 2.0 01.98-02.01

View part

SACHS1 Clutch cover 3082 641 802

Clutch cover (250mm) fits: MITSUBISHI PAJERO II 2.8D/3.5 06.94-10.99

View part

SACHS1 Clutch cover 3082 676 001

Clutch cover (240mm) fits: DAEWOO LUBLIN II OPEL FRONTERA A, FRONTERA B 2.2/2.4D 03.95-

View part

SACHS1 Clutch cover 3082 676 002

Clutch cover (240mm) fits: OPEL FRONTERA A 2.4 03.92-10.98

View part

SACHS1 Clutch cover 3082 770 001

Clutch cover (230mm) fits: OPEL CALIBRA A, VECTRA A 2.0 08.91-07.97

View part

SACHS1 Clutch assy 3089 000 010

Clutch kit with dual-mass flywheel (215mm) fits: SMART CABRIO, CITY-COUPE, FORTWO 0.8D 11.99-01.07

View part

SACHS1 Clutch assy 3089 000 033

Clutch kit with dual-mass flywheel (215mm) fits: SMART CABRIO, CITY-COUPE, FORTWO, ROADSTER 0.7 01.03-01.07

View part

SACHS1 Clutch assy 3089 006 033

Clutch kit with dual-mass flywheel (215mm) fits: SMART CABRIO, CITY-COUPE, CROSSBLADE 0.6 07.98-01.04

View part

SACHS1 Clutch assy 3089 600 110

Clutch kit (228mm) fits: CHRYSLER SEBRING DODGE AVENGER, CALIBER, JOURNEY JEEP COMPASS, PATRIOT 1.8-2.4LPG 06.06-

View part

SACHS1 Clutch assy 3090 600 002

Clutch kit with rigid wheel and release bearing (215mm) fits: SMART CABRIO, CITY-COUPE, FORTWO, ROADSTER 0.7 01.03-01.07

View part

SACHS1 Clutch assy 3090 600 003

Clutch kit with dual mass flywheel and bearing (215mm) fits: SMART CABRIO, CITY-COUPE, FORTWO 0.8D 11.99-01.07

View part

SACHS1 Clutch assy 3090 600 005

Clutch kit with dual mass flywheel and bearing (240mm) fits: CHRYSLER PT CRUISER 2.0/2.4 06.00-12.10

View part

SACHS1 Clutch assy 3090 600 008

Clutch kit with dual mass flywheel and bearing (215mm) fits: SMART CABRIO, CITY-COUPE, CROSSBLADE 0.6 07.98-01.04

View part

SACHS1 Clutch assy 3090 600 014

Clutch kit (228mm) fits: CHRYSLER SEBRING DODGE AVENGER, CALIBER, JOURNEY JEEP COMPASS, PATRIOT 1.8-2.4LPG 06.06-

View part

Buying with Partios

Buying SACHS1 parts through Partios

Are these genuine SACHS1 parts?

Yes. Every SACHS1 line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source SACHS1 parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for SACHS1 lines that aren't currently available.

Do you supply SACHS1 parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on SACHS1 parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a SACHS1 order?

It depends on the line. Stocked SACHS1 items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for SACHS1 parts?

No. There's no minimum order value or quantity on a Partios trade account. Some SACHS1 lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account