Partios Wholesale catalogue

S-TR Distributor | Parts

Cutter and elements (315) · Center link (301) · Tie rod end (248) · Leaf spring shackle (236) · Engine mount (204) · Bolts, nuts and pins (168) · Leaf spring silent block (123) · Stabilizer bar bushing (119) · 203 further part types (2,968)

5,001 current catalogue lines

About the S-TR range

S-TR is a multi-system brand rather than a single-product one: the range Partios carries runs to 5,001 lines across 211 distinct part types. The largest groups are cutter and elements (315), center link (301), tie rod end (248), leaf spring shackle (236) and engine mount (204). They account for only 31% of the range, though. The other 3,210 lines sit across 205 further part types, which is what makes this a range to search rather than browse. That tail includes leaf spring silent block, stabilizer bar bushing and stabilizer link. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 5,001 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

S-TR Side lashing, stabiliser STR-15A789

Side lashing, stabiliser (manual) min length: 435, max length: 535mm diameter: 24/20mm fits: CASE IH MX

View part

S-TR Side lashing, stabiliser STR-15A790

Extraction element (brackets) fits: CASE IH 5000, 5000 MAXXUM, FARM, MAXXUM

View part

S-TR Side lashing, stabiliser STR-15A791

Extraction element (brackets) fits: CASE IH 5000, 5000 MAXXUM, FARM, MAXXUM

View part

S-TR Lift hanger STR-15A792

Lift hanger fits: MASSEY FERGUSON 4225, 4225HV, 4235, 4235 (USA), 4235HV, 4235HV (USA), 4240, 4245, 4245HV, 4255, 4255HV, 4260, 4265, 4270, 4315, 4320, 4325, 4325HV, 4335, 4335HV, 4345, 4345HV

View part

S-TR Lift hanger STR-15A794

Lift hanger fits: MASSEY FERGUSON 7465, 7475, 7480, 7485, 7490, 7495, 7497, 7499

View part

S-TR Lift hanger STR-15A795

Lift hanger fits: MASSEY FERGUSON 6475, 6480, 6615, 6616, 7616, 7618

View part

S-TR Side lashing, stabiliser STR-15A796

Side lashing, stabiliser (automatic) min length: 496,5, max length: 518mm fits: MASSEY FERGUSON 5000, 6000, 7000, 8000

View part

S-TR Side lashing, stabiliser STR-15A797

Side lashing, stabiliser (manual) min length: 530, max length: 700mm diameter: 24/20mm fits: VALTRA T

View part

S-TR Lift hanger STR-15A798

Lift hanger fits: RENAULT 103-54 TA, 103-54 TE, 103-54 TS, 103-54 TX, 106-54, 106-54 TL, 106-54 TM, 106-54 TS, 110-54 TA, 110-54 TE, 110-54 TS, 110-54 TX, 110-54 TZ, 120-54 TA, 120-54 TE

View part

S-TR Side lashing, stabiliser STR-15A799

Side lashing, stabiliser min length: 666, max length: 830mm diameter: 28,4 fits: RENAULT 100, XX-12, XX-14, XX-54

View part

S-TR Side lashing, stabiliser STR-15A800

Side lashing, stabiliser (manual) min length: 585 diameter: 22 fits: RENAULT 70, 80, CERES, CERGOS, ERGOS, XX-32, XX-34

View part

S-TR Lift hanger STR-15A801

Lift hanger fits: RENAULT 600 (M), 600 (MI), 650 MI, 70-32, 70-34, 700 H, 700 M, 704 H, 704 M, 720 M, 720RZ, 724 H, 724 M, 750 MI, 754 MI, 80-32, 80-34, 800 M, 804 M, 804 MI, 850 MI, 854 MI

View part

S-TR Header reel and elements STR-15A805

Header reel and elements (Drum finger) fits: JOHN DEERE 1170, 1450, 1450 CWS, 1450 WTS, 1550 CWS, 1550 WTS, 1550S, 6622, 9540 WTS, 9560 WTS, 9580 WTS, 9640 WTS, 9660 WTS, 9680 WTS, 540, 550, 650

View part

S-TR TUZ other suspension elements STR-15A806

TUZ other suspension elements fits: JOHN DEERE 328, 332

View part

S-TR Lift arm STR-15A807

Lift arm fits: URSUS 4512, 4514

View part

S-TR Knuckle STR-15A810

Knuckle fits: FIAT 540, 600, 640

View part

S-TR Knuckle STR-15A811

Knuckle fits: CASE IH 268, 278, 288, 3230, 485, 4210, 4220, 4230, 4240, 584, 585, 595, 684, 685, 695, 784, 785, 795, 884, 885, 895, 995, 70, 80, 90, 100, 100 C, 80 C, 90 C MC CORMICK C 100

View part

S-TR Lift arm STR-15A814

Lift arm fits: ALLIS CHALMERS 5045, 5050 FIAT 450 2WD, 450 4WD, 480, 500, 540, 550, 55-46, 600 2WD, 600 4WD, 640, 60-46

View part

S-TR Shock absorber bolt washer STR-15A815

Shock absorber bolt washer fits: JOHN DEERE

View part

S-TR PTO driveshaft STR-15A824

PTO driveshaft fits: MASSEY FERGUSON 133, 135, 135 V, 148, 165, 168, 168 F, 168 S, 175, 178, 185, 188, MF 35, MF 65

View part

S-TR Engine mount STR-15A826

Engine mount fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C, 438 C, 438 D, 442 D

View part

S-TR Engine mount STR-15A828

Engine mount fits: VOLVO BL60, BL61, BL70, BL71

View part

S-TR Engine mount STR-15A829

Engine mount fits: CATERPILLAR 236B3, 242B3, 246C, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 272D, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 297D, 299C, 299D, 414 E, 416 B

View part

S-TR Side lashing, stabiliser STR-15A830

Side lashing, stabiliser (manual) fits: JOHN DEERE 5000, 6000

View part

S-TR Lift arm STR-15A832

Lift arm fits: DEUTZ FAHR 5005, 5206, 5506, 6006, 6206, 6806, 7206

View part

S-TR Steering knuckle pivot STR-15A834

Steering pivot fits: CASE IH 125 A, 130 A, 140 A, 100, 110, 115, 120, 125, 130, 135, 140, 145, 150, 150 CVT, 155, 160, 165, 165 CVT NEW HOLLAND T6010, T6020, T6030, T6040, T6050, T6060, T6070

View part

S-TR Tie rod end STR-20102

Tie rod end (thread type inner direction right-sided, M16x1,5mm) fits: IVECO DAILY III, DAILY IV, DAILY V 05.99-02.14

View part

S-TR Front ball joint STR-20103

Axle ball joint L/R (bottom front, cone diameter: 21mm, length: 57mm, M18x1,5) fits: IVECO DAILY III, DAILY IV, DAILY V 05.99-02.14

View part

S-TR Front ball joint STR-20104

Axle ball joint L/R (top front) (cone diameter 17,8mm) fits: IVECO DAILY III, DAILY IV 2.3D-3.0D 05.99-08.11

View part

S-TR Front ball joint STR-20105

Front axle ball joint L/R IVECO DAILY 2.3/2.8/3.0 05.99-

View part

S-TR Tie rod end STR-20108

Tie rod end (thread type external, M38x1,5mm/M24x1,5mm, L-120mm) fits: IVECO TURBOTECH MAN TGA MERCEDES NG, SK RVI MANAGER, MAXTER 08.73-

View part

S-TR Tie rod end STR-20115

Tie rod end (thread type external direction right-sided, M14x1,5mm, L-85mm) fits: IVECO ZETA 01.83-03.91

View part

S-TR Tie rod end STR-20117

Tie rod end (thread type external / inner direction right-sided, M16x1,5mm/M14x1,5mm, L-109mm) fits: IVECO DAILY VI 03.14-

View part

S-TR Front ball joint STR-20120

Axle ball joint R (top front, cone diameter: 42mm, length: 100mm, with extras) fits: IVECO URBANWAY IRISBUS ARWAY, CITELIS, CREALIS, CROSSWAY 04.98-

View part

S-TR Tie rod end STR-20123

Tie rod end (thread type external direction right-sided, M24x1,5mm/M24x1,5mm, L-95mm) fits: IVECO P/PA 01.83-12.93

View part

S-TR Tie rod end STR-20124

Tie rod end (thread type inner direction right-sided, M30x1,5mm/M24x1,5mm, L-80mm) fits: IVECO EUROSTAR, EUROTECH MP, EUROTRAKKER MAN E2000, F2000, TGA, TGS I, TGX I 01.92-

View part

S-TR Front ball joint STR-20127

Axle ball joint L/R (bottom/top front, cone diameter: 24mm, M20x1,5) fits: IVECO DAILY V, DAILY VI 09.11-

View part

S-TR Tie rod end STR-20203

Tie rod end (thread type external direction right-sided, M30x1,5mm/M24x1,5mm, L-140mm) fits: DAF LF 55 MAN F2000, FOC, LION ́S CITY, M 2000 L, M 2000 M, ND, NL, NÜ, TGA, TGL II, TGM I 01.70-

View part

S-TR Tie rod end STR-20207

Tie rod end (thread type external direction left-sided, M28x1,5mm/M18x1,5mm, L-105mm) fits: DAF 45, 95 XF MAN L2000, M 2000 L VOLVO FL4 02.86-

View part

S-TR Tie rod end STR-20213

Tie rod end (thread type inner direction right-sided, M26x1,5mm/M24x1,5mm, L-95mm) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, ATEGO 2, AXOR, AXOR 2 SCANIA 4, G I, P I, R I, T 08.77-

View part

S-TR Tie rod end STR-20219

Tie rod end (thread type inner direction right-sided, M52x1,5mm, L-168mm) fits: MAN NG, NL MERCEDES O 405 01.84-

View part

S-TR Tie rod end STR-20226

Tie rod end (thread type external direction right-sided, M30x1,5mm/M18x1,5mm, L-190mm) fits: MAN TGL I 04.05-03.22

View part

S-TR Tie rod end STR-20228

Tie rod end (thread type external direction right-sided, M30x1,5mm/M20x1,5mm, L-140mm) fits: DAF 65 CF, 75 CF, 85 CF, 95 XF, CF 75, CF 85 MAN L2000, M 2000 L, M 2000 M, M90, TGM I VOLVO FL 09.85-

View part

S-TR Tie rod end STR-20301

Tie rod end (thread type inner, M26x1,5mm/M27x1,5mm, L-75mm) fits: IVECO S-WAY MERCEDES INTEGRO (O 550), NG, SK, TRAVEGO (O 580) SCANIA 4, G I, P I, R I, T 08.73-

View part

S-TR Tie rod end STR-20303

Tie rod end (thread type inner direction right-sided, M26x1,5mm/M24x1,5mm, L-90mm) fits: IVECO EUROMOVER, EUROSTAR, EUROTECH MP, S-WAY MAN E2000, F2000, HOCL, LION ́S CITY, NL, NÜ, TGA 01.92-

View part

S-TR Tie rod end STR-20308

Tie rod end (thread type external direction right-sided, M30x1,5mm/M27x1,5mm, L-122mm) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO, AXOR, AXOR 2, ECONIC 08.73-

View part

S-TR Tie rod end STR-20309

Tie rod end (thread type external direction left-sided, M30x1,5mm/M27x1,5mm, L-122mm) fits: DAF 95 XF MERCEDES ACTROS, ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS 04.96-

View part

S-TR Tie rod end STR-20310

Tie rod end (thread type external direction right-sided, M24x1,5mm/M18x1,5mm, L-105mm) fits: IVECO ZETA MERCEDES ACTROS MP4 / MP5, T2/L, UNIMOG, T2/LN1, VARIO (B667, B670, B668) 01.62-

View part

Buying with Partios

Buying S-TR parts through Partios

Are these genuine S-TR parts?

Yes. Every S-TR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source S-TR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for S-TR lines that aren't currently available.

Do you supply S-TR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on S-TR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a S-TR order?

It depends on the line. Stocked S-TR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for S-TR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some S-TR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account