Partios Wholesale catalogue
S-TR Distributor | Parts
Cutter and elements (315) · Center link (301) · Tie rod end (248) · Leaf spring shackle (236) · Engine mount (204) · Bolts, nuts and pins (168) · Leaf spring silent block (123) · Stabilizer bar bushing (119) · 203 further part types (2,968)
5,001 current catalogue lines
About the S-TR range
S-TR is a multi-system brand rather than a single-product one: the range Partios carries runs to 5,001 lines across 211 distinct part types. The largest groups are cutter and elements (315), center link (301), tie rod end (248), leaf spring shackle (236) and engine mount (204). They account for only 31% of the range, though. The other 3,210 lines sit across 205 further part types, which is what makes this a range to search rather than browse. That tail includes leaf spring silent block, stabilizer bar bushing and stabilizer link. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 5,001 lines the range covers most common applications in this area.
Catalogue products
Vehicle references are indicative — confirm against the article number.
S-TR Bucket sleeve STR-15A249
Bucket sleeve 45,95mm fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC
View partS-TR Boon sleeve STR-15A250
Dipper ram sleeve 51,2/56,4x64,54 fits: JCB 500 530-110
View partS-TR Boon sleeve STR-15A251
Dipper ram sleeve 50,88/57,55x100 fits: JCB 3, 4, 500 3CX/3CX SITEMASTER/3CX-2/3CX-4/3CXC/3CXS/3CXT/4CX/4CXC/536-60
View partS-TR Boon sleeve STR-15A252
Dipper ram sleeve 52/57x114 fits: JCB 3, 4, 5, 500 3CX/3CX SITEMASTER/3CX-2/3CX-4/3CXC/3CXS/3CXT/4CX/4CXC/530/5CX
View partS-TR Axle shaft main shaft STR-15A254
CV axle shaft fits: CASE IH 238, 248, 258, 268, 288, 2120, 2130, 2140, 2150, 395, 3210, 3220, 3230, 495 XL, 4210, 4220, 4230, 4240, 595 XL, 695 XL, 795 XL, 895 XL, 995 XL, 50, 60, 70, 80
View partS-TR Axle shaft main shaft STR-15A255
CV axle shaft fits: CASE IH 395, 3210, 3220, 3230, 495, 495 XL, 4210, 4220, 4230, 4240, 595, 595 XL, 695, 695 XL, 795, 795 XL, 895, 895 XL, 995, 995 XL, 50, 60, 70, 80, 90, 100, 100 C
View partS-TR Axle shaft main shaft STR-15A256
CV axle shaft fits: JOHN DEERE 5045E, 5060 E, 5080R, 5090R, 5100R, 5103, 5105, 5125R, 5203, 5203 S, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5415 2WD, 5415 4WD, 5420, 5425, 5503, 5520
View partS-TR Axle shaft STR-15A257
Drive axle shaft fits: JOHN DEERE 5045E, 5060 E, 5065E 2WD, 5065E 4WD, 5075E 2WD, 5075E 4WD, 5080R, 5090R, 5100R, 5103, 5105, 5203, 5203 S, 5205, 5220, 5225, 5303, 5320, 5325, 5403
View partS-TR Axle shaft STR-15A259
Drive axle shaft fits: JOHN DEERE 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5415 2WD, 5415 4WD, 5420, 5500, 5510, 5520, 5600, 5615 2WD, 5615 4WD, 5700, 5715
View partS-TR Axle shaft main shaft STR-15A260
CV axle shaft fits: CASE IH 395, 3000, 3210, 3220, 3230, 495, 495 XL, 4000, 4210, 4220, 4230, 4240, 595, 595 XL, 695, 695 XL, 795, 795 XL, 895, 895 XL, 995, 995 XL, 50, 60, 70, 80, 90
View partS-TR Steering knuckle pivot sleeve STR-15A261
Steering knuckle pivot sleeve fits: FORD 3230, 3430, 3930, 4130, 4630, 4830 JOHN DEERE 5045E, 5050E, 5055E 2WD, 5055E 4WD, 5060 E, 5065E 2WD, 5065E 4WD, 5075E 2WD, 5075E 4WD, 5075GV, 5080R
View partS-TR Three-piont suspension system pivots STR-15A263
Three-piont suspension system pivots fits: JOHN DEERE 100, 110, 200, 210, 300, 310, 310L, 320, 325, 330, 430, 400, 410L, 415, 420, 500, 505, 510, 515, 520, 530, 5080R, 5080RN, 5090R, 5090RN
View partS-TR Engine mount STR-15A264
Engine mount fits: JOHN DEERE 3200, 3200 A, 3200 AX, 3200 X, 3215, 3215B, 3220, 3400, 3400 A, 3400 AX, 3400 X, 3415, 3420, 3800, 5020, 5200, 5203, 5203 S, 5204, 5204 IN, 5205, 5220, 5220H
View partS-TR Steering knuckle pivot sleeve STR-15A266
Steering knuckle pivot sleeve fits: CASE IH 105 C, 125 A, 140 A, 55 C, 65 C, 75 C, 85 C, 95 C, 95 U, 1060 C, 1070 C, 1070 U, 1075 C, 1080 U, 1085 C, 1095 C, 70 U, 80 U, 235, 250, 260, 100, 110
View partS-TR Gaskets (vehicles) STR-15A267
O-ring 32,99x2,61mm fits: CASE IH 115CL, 160CL, 170, 170B, 1088, 1288, 1488 LC, 1830, 220B, 220CK, 2404, 300CK, 300CL, 350CKB, 400, 404, 4140, 580 D, 580 G, 580 K, 588, 60CL, 60P, 60PL, 688, 688 B
View partS-TR Input shaft nut STR-15A268
Ring gear nut fits: FIAT 45-66 2WD, 45-66 4WD, 45-66 S 2WD, 45-66 S 4WD, 45-66 V, 50-66 2WD, 50-66 4WD, 50-66 S 2WD, 50-66 S 4WD, 50-66 V, 55-46, 55-46 DT, 55-56, 55-56 DT, 55-66, 55-66 DT
View partS-TR Axle sliding sleeve STR-15A270
Half-axle moving bushing fits: CASE IH 100 U, 1070 U, 1080 U, 1090 U, 1100 U, 55, 60, 65, 70, 70 U, 75, 80, 80 U, 85, 90, 90 U, 95, 100, 110, 115 FIAT 100-90, 110-90, 70-88, 70-90, 72-93, 72-94
View partS-TR Steering knuckle pivot STR-15A271
Steering pivot fits: FENDT 712 FAVORIT, 714 FAVORIT, 716 FAVORIT JOHN DEERE 3200, 3215, 3220, 3400, 3415, 3420, 6140 J, 6155 J, 6800, 6810, 6820, 6900, 6910, 6910 S, 6920, 6920 S, 7210, 7410
View partS-TR Engine mount STR-15A272
Engine mount fits: JOHN DEERE 2054, 2900, 4630, 5070M 2WD, 5070M 4WD, 5080M 2WD, 5080M 4WD, 5090M 2WD, 5090M 4WD, 5090R, 5100M 2WD, 5100M 4WD, 5100R, 5620, 5720, 5820, 644ER, 6020, 6030
View partS-TR Suspension sleeve STR-15A273
Suspension sleeves fits: JOHN DEERE 1000, 2000, 800, 900 1040/1140/1640/1840/2040/2040S/2140/2150 2WD/2150 4WD/2255/2350 2WD/2350 4WD/2550 2WD/2550 4WD/2750 2WD/2750 4WD/840/940 01.76-12.87
View partS-TR Planetary gearbox satellite pin STR-15A274
Planetary gearbox satellite pin fits: JOHN DEERE 1640, 1840, 2040, 2040S, 2140, 2155, 2250, 2350 2WD, 2350 4WD, 2355, 2355N, 2450, 2550 2WD, 2550 4WD, 2555, 2650, 2750 2WD, 2750 4WD, 2755, 2850
View partS-TR Suspension sleeve STR-15A275
Suspension sleeves fits: JOHN DEERE 2000 2704/2854/2904/3004/3204/8100/8110/8120/8130 2WD/8130 4WD/8200/8210/8220/8225 R/8230/8235 R/8245 R/8260 R/8270 R/8285 R/8295 R/8300/8310/8310 R/8320/8320 R/833
View partS-TR Suspension fitting elements STR-15A276
Suspension mounting elements fits: CARRARO 20.11, JOHN DEERE 5000 2.9-D
View partS-TR Axle sliding sleeve STR-15A277
Half-axle moving bushing fits: JOHN DEERE 5045D, 5045E, 5050E, 5055E 2WD, 5055E 4WD, 5058E, 5060 E, 5065E 2WD, 5065E 4WD, 5067E, 5070E, 5075E, 5080E, 5080R, 5082E, 5090E, 5090EH, 5090R, 5100R
View partS-TR Boom pin STR-15A278
Arm pin fits: JOHN DEERE 1550, 1750, 1850, 1950, 1950N, 2155, 2250, 2355, 2355N, 2450, 2555, 2650, 2850
View partS-TR Steering knuckle pivot STR-15A280
Steering pivot fits: FENDT 309 C TURBO FARMER, 309 CA FARMER, 309 CI FARMER, 309 FARMER, 309 LS FARMER, 309 LSA FARMER, 309 S FARMER, 309 VARIO, 309 VARIO 2WD, 309 VARIO 4WD, 310 FARMER
View partS-TR Axle shaft STR-15A281
Drive axle shaft fits: JOHN DEERE 5045E, 5060 E, 5065E 2WD, 5065E 4WD, 5075E, 5075E 2WD, 5075E 4WD, 5080R, 5090R, 5100R, 5103, 5105, 5203, 5203 S, 5205, 5220, 5225, 5303, 5320, 5325, 5403
View partS-TR Lift arm STR-15A282
Lift arm fits: JOHN DEERE 4120, 4320, 4500, 4510, 4520, 4600, 4610, 4700, 4710, 4720, 5045D, 5045E, 5055D, 5055E 2WD, 5055E 4WD, 5065E 2WD, 5065E 4WD, 5075E 2WD, 5075E 4WD, 5083E, 5093E, 5101E
View partS-TR Lift hanger STR-15A283
Lift hanger fits: JOHN DEERE 5065M, 5070M 2WD, 5070M 4WD, 5075M, 5076E, 5076EL, 5080M 2WD, 5080M 4WD, 5082E, 5085M, 5090E, 5090EH, 5090EL, 5090M 2WD, 5090M 4WD, 5095M 2WD, 5095M 4WD, 5095MH
View partS-TR Lift lower rod STR-15A285
Lift lower rod fits: JOHN DEERE 100 110/210/310/320/330/420/425/430/435/445/460/465/5080R/5080RN/5090R/5090RN/5100R/5100RN/520/5425/555/5620/5720/5820/6010 SE/6090M/6090MC/6090RC/6100M/6100MC/6100RC/6
View partS-TR Upper joints and accessories STR-15A286
Upper joints and accessories, connector fits: JOHN DEERE 6020, 6120, 6130, 6130 2WD, 6130 4WD, 6220, 6230, 6230 2WD, 6230 4WD, 6230 PREMIUM, 6300, 6310, 6320, 6320 SE, 6330 2WD, 6330 4WD
View partS-TR Three-piont suspension system pivots STR-15A287
Three-piont suspension system pivots fits: JOHN DEERE 2704, 2854, 2904, 3004, 3204, 7200 R, 7210 R, 7215 R, 7230 R, 7250 R, 7260 R, 7270 R, 7280 R, 7290 R, 7310 R, 7R 210, 7R 230, 7R 250
View partS-TR Suspension buffer STR-15A290
Suspension buffer fits: JOHN DEERE 5000, 6000, 7000, 8000, 8R
View partS-TR Steering knuckle pivot STR-15A291
Steering pivot fits: FORD 5610 S, 5640, 6610 S, 6640, 6810 S, 7610 S, 7740, 7840, 8240, 8340 NEW HOLLAND 135, 145, 155
View partS-TR Steering knuckle pivot STR-15A292
Steering pivot (/30/50) fits: CASE IH 100, 100 C, 110, 120, 135, 150, 170, 80 C, 90 C MASSEY FERGUSON 295T, 6465, 6475, 6480 VALTRA 6300, 6400, 6550 HI, 6650 HI, 6850 HI, BH160, BH160HI, BH180
View partS-TR Steering knuckle pivot STR-15A293
Steering pivot (/35/45) fits: CASE IH 2120, 2130, 2140, 2150, 3210, 3220, 3230, 4220, 4230, 4240, 100, 50, 60, 70, 80, 90, 48, 52 2WD, 52 4WD, 58, 63 2WD, 63 4WD, 68, 75, 78, 86, 94, 80 C, PJN 55
View partS-TR Steering knuckle pivot STR-15A294
Steering pivot fits: JOHN DEERE 1204, 1354, 5-750, 5-754, 5-800, 5-804, 5-850, 5-854, 5-900, 5-904, 5050E, 5055E 2WD, 5055E 4WD, 5060 E, 5065E 2WD, 5065E 4WD, 5075E, 5075E 2WD, 5075E 4WD, 5075M
View partS-TR Steering knuckle pivot STR-15A295
Steering pivot fits: MASSEY FERGUSON 154 S, 164 F, 174 F, 174 S, 184 F, 184 S, 185, 194 F, 194 S, 254, 254 S, 264, 274, 284, 294, 354, 354 F, 364 F, 364 S, 374 S, 384 S, 394 S, 3050, 3060, 3065
View partS-TR Upper joints and accessories STR-15A296
Upper joints and accessories fits: MASSEY FERGUSON 16, 165, 165 MK III, 1715, 178, 180, 185, 188, 1250, 1260, 1560, 20, 24, 25, 263, 2415, 2675, 30, 342, 352, 355, 362, 365, 372, 375, 382
View partS-TR Axle sliding sleeve STR-15A297
Half-axle moving bushing fits: FORD 5610 S, 6610 S, 6810, 6810 S, 7610, 7610 S, 7710, 7810, 7810 S, 7910 JOHN DEERE 5076E, 5076EF, 5076EL, 5076EN, 5083EN, 5090EL, 5093EN, 5101EN, 5105, 5105ML
View partS-TR Upper joints and accessories STR-15A298
Upper joints and accessories, connector fits: MASSEY FERGUSON 16, 180, 185, 188, 1200, 20, 25, 29, 220, 235, 240, 245, 255, 265, 2675, 30, 340, 355, 360, 362, 365, 372, 375, 382, 390, 396
View partS-TR Lift shaft and accessories STR-15A299
Lift shaft and accessories fits: JOHN DEERE 7220, 7320, 7505, 7515
View partS-TR Lift lower rod STR-15A300
Lift lower rod fits: FIAT 100-XX 100-90/100-90 DT/110-90/110-90 DT/180-90 DT/70-66/70-66 DT/70-90/70-90 DT/72-93/72-93 DT/72-94/72-94 DT/766/766 DT/80-66/80-66 DT/80-90/82-93/82-93 DT/82-94/82-94 DT/8
View partS-TR Lower joints and accessories STR-15A301
Lower joints and accessories fits: JOHN DEERE 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2250, 2250F, 2450, 2650, 2850, 6100 D, 6105 J, 6110 B, 6110 D, 6115 D, 6130 D
View partS-TR Steering knuckle pivot STR-15A302
Steering pivot fits: CASE IH 2120, 2130, 2140, 2150, 3210, 3220, 3230, 4220, 4230, 4240, 100, 50, 60, 70, 80, 90, 48, 52 2WD, 52 4WD, 58, 63 2WD, 63 4WD, 68, 75, 78, 86, 94, 80 C, PJN 55, PJN 65
View partS-TR Steering knuckle pivot STR-15A303
Steering pivot fits: CASE IH 100, 110, 110 CVX, 115, 120, 120 CVX, 120 PRO, 125, 130, 130 CVX, 135, 140, 145, 150, 270 CVXDrive, 130 CVT, 140 CVT, 145 CVT, 145 CVX, 150 CVT, 150 CVX, 155, 160
View partS-TR Axle sliding sleeve STR-15A304
Half-axle moving bushing fits: CASE IH 55, 60, 70, 100 U, 1060 C, 1070 C, 1070 U, 1075 C, 1080 U, 1085 C, 1090 U, 1095 C, 1100 U, 70 U, 75, 80, 80 U, 85, 90, 95 FORD 3830, 3935, 4010 S, 4030
View partS-TR Steering knuckle pivot STR-15A305
Steering pivot fits: CASE IH 125 A, 140 A, 100, 110, 110 CVX, 115, 120, 120 CVX, 120 PRO, 125, 130, 130 CVX, 135, 140, 145, 150, 270 CVXDrive, 130 CVT, 140 CVT, 145 CVT, 145 CVX, 150 CVT
View partBuying with Partios
Buying S-TR parts through Partios
Are these genuine S-TR parts?
- Yes. Every S-TR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source S-TR parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for S-TR lines that aren't currently available.
Do you supply S-TR parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on S-TR parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a S-TR order?
- It depends on the line. Stocked S-TR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for S-TR parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some S-TR lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account